This page is part of archived documentation for openHAB 3.3. Go to the current stable version

# Xiaomi Wifi devices (Mi IO) Binding

This binding is used to control Xiaomi products implementing the Mi IO protocol. This protocol is used for most of Xiaomi Mi Ecosystem wifi devices which is branded as MiJia. If your Xiaomi wifi device is controlled by the mihome app, most likely it communicates using the Mi IO protocol and can communicate with openHAB using this binding.

MIIO logo

# Supported Things

The following things types are available:

ThingType Description
miio:generic Generic type for discovered devices. Once the token is available and the device model is determined, this ThingType will automatically change to the appropriate ThingType
miio:vacuum For Xiaomi/RoboRock Robot Vacuum products
miio:basic For most other devices like yeelights, airpurifiers. Channels and commands are determined by database configuration
miio:gateway Similar to basic, but with the Bridge feature, it can support to forward commands for connected devices
miio:lumi Thing type for subdevices connected to the gateway. Note, these devices require a defined gateway to function
miio:unsupported For experimenting with other devices which use the Mi IO protocol or to build experimental support

# Discovery

The binding has 2 methods for discovering devices. Depending on your network setup and the device model, your device may be discovered by one or both methods. If both methods discover your device, 2 discovery results may be in your inbox for the same device.

The mDNS discovery method will discover your device type, but will not discover a (required) token. The basic discovery will not discovery the type, but will discover a token for models that support it. Accept only one of the 2 discovery results, the alternate one can further be ignored.

# Tokens

The binding needs a token from the Xiaomi Mi Device in order to be able to control it. The binding can retrieve the needed tokens from the Xiaomi cloud. Go to the binding config page and enter your cloud username and password. The server(s) to which your devices are connected need to be entered as well. Use the one of the regional servers: cn,de,i2,tw,ru,sg,us. Multiple servers can be separated with comma, or leave blank to test all known servers. See binding configuration for more details about the binding config.

# Tokens without cloud access

Some devices provide the token upon discovery. This may depends on the firmware version. If the device does not discover your token, it needs to be retrieved from the Mi Home app.

The easiest way to obtain tokens is to browse through log files of the Mi Home app version 5.4.49 for Android. It seems that version was released with debug messages turned on by mistake. An APK file with the old version can be easily found using one of the popular web search engines. After downgrading use a file browser to navigate to directory SmartHome/logs/plug_DeviceManager, then open the most recent file and search for the token. When finished, use Google Play to get the most recent version back.

For iPhone, use an un-encrypted iTunes-Backup and unpack it and use a sqlite tool to view the files in it: Then search in "RAW, com.xiaomi.home," for "USERID_mihome.sqlite" and look for the 32-digit-token or 96 digit encrypted token.

Note. The Xiaomi devices change the token when inclusion is done. Hence if you get your token after reset and than include it with the Mi Home app, the token will change.

# Binding Configuration

No binding configuration is required. However to enable cloud functionality enter your Xiaomi username, password and server(s). The list of the known countries and related severs is here.

After successful Xiaomi cloud login, the binding will use the connection to retrieve the required device tokens from the cloud. For Xiaomi vacuums the map can be visualized in openHAB using the cloud connection.

To enter your cloud details go to the bindings page, click the Xiaomi Mi IO binding and than configure. Binding Config

In the configuration page, enter your userID /passwd and county(s) or leave the countries servers blank. Binding Config

The binding also supports the discovery of devices via the cloud. This may be useful if the device is on a separate subnet. (note, after accepting such a device on a different subnet, the communication needs to be set to cloud in order to have it working.)

# Thing Configuration

Each Xiaomi device (thing) needs the IP address and token configured to be able to communicate. See discovery for details. Optional configuration is the refresh interval and the deviceID. Note that the deviceID is automatically retrieved when it is left blank. The configuration for model is automatically retrieved from the device in normal operation. However, for devices that are unsupported, you may override the value and try to use a model string from a similar device to experimentally use your device with the binding.

Parameter Type Required Description
host text true Device IP address
token text true Token for communication (in Hex)
deviceId text true Device Id (typically a number for normal devices) for communication
model text false Device model string, used to determine the subtype
refreshInterval integer false Refresh interval for refreshing the data in seconds. (0=disabled)
timeout integer false Timeout time in milliseconds
communication text false Communicate direct or via cloud (options values: 'direct', 'cloud')
cloudServer text false Identifies the country server to use in case of cloud communication

Note: Suggest to use the cloud communication only for devices that require it. It is unknown at this time if Xiaomi has a rate limit or other limitations on the cloud usage. e.g. if having many devices would trigger some throttling from the cloud side. Note2: communications parameter is not available for lumi devices. Lumi devices communicate using the bridge/gateway.

# Example Thing file

Thing miio:basic:light "My Light" [ host="192.168.x.x", token="put here your token", deviceId="326xxxx", model="philips.light.bulb", communication="direct" ]

or in case of unknown models include the model information of a similar device that is supported:

Thing miio:vacuum:s50 "vacuum" @ "livingroom" [ host="192.168.15.20", token="xxxxxxx", deviceId="326xxxx", model="roborock.vacuum.s4", communication="direct", cloudServer="de" ]

in case of gateway, instead of defining it as a Thing, use Bridge

Bridge miio:gateway:lumigateway "Mi Smarter Gateway" [ host="10.10.x.x", token="put here your token", deviceId="326xxxx", model="lumi.gateway.mieu01", communication="direct", cloudServer="de" ]

# Advanced: Unsupported devices

Newer devices may not yet be supported. However, many devices share large similarities with existing devices. The binding allows to try/test if your new device is working with database files of older devices as well.

There are 2 ways to get unsupported devices working, by overriding the model with the model of a supported item or by test all known properties to see which are supported by your device.

# Substitute model for unsupported devices

Replace the model with the model which is already supported. For this, first remove your unsupported thing. Manually add a miio:basic thing. Besides the regular configuration (like ip address, token) the modelId needs to be provided. Normally the modelId is populated with the model of your device, however in this case, use the modelId of a similar device. Look at the openHAB forum, or the openHAB GitHub repository for the modelId of similar devices.

# Supported property test for unsupported devices

The unsupported device has a test channel with switch. When switching on, all known properties are tested, this may take few minutes. A test report will be shown in the log and is saved in the userdata/miio folder with a filename test-[your model]-[timestamp].txt. If supported properties are found, an experimental database file is saved to the conf/misc/miio folder (see below chapter). The thing will go offline and will come back online as basic device, supporting the found channels. The database file may need to be modified to display the right channel names. After validation, please share the logfile and json files on the openHAB forum or the openHAB GitHub to build future support for this model.

# Advanced: adding local database files to support new devices

Things using the basic handler (miio:basic things) are driven by json 'database' files. This instructs the binding which channels to create, which properties and actions are associated with the channels etc. The conf/misc/miio (e.g. in Linux /opt/openhab/conf/misc/miio/) is scanned for database files and will be used for your devices. During the start of the binding the exact path used in your system will be printed in the debug log. Watch for a line containing Started miio basic devices local databases watch service. Watching for database files at path: … ( If this folder is created after the start of the binding, you may need to restart the binding (or openHAB) to be able to use the local files. Note that local database files take preference over build-in ones, hence if a json file is local and in the database the local file will be used. For format, please check the current database files in openHAB GitHub.

# FAQ.. what to do in case of problems

If your device is not getting online:

Are you using text config? Make sure you define all the fields as per above example. Or, better, try to get it going first without text config.

The token is wrong The most common cause of non responding devices is a wrong token. When you reset, or change wifi or update firmware, and possibly other cases as well, the token may change. You'll need to get a refreshed token.

My token is coming from the cloud... how can it be wrong? Is not very likely but still can happen._ This can happen e.g. if your device is defined on multiple country servers. The binding may pull the token from the wrong country server. First try to get the token from all country servers by leave the county setting empty. If that does not solve it, you define only the country that the device is on in the binding config page (where the cloud userid/pwd is entered) this should pull the right token.

You have the same device added multiple times. The communication each time send a sequential number. If the device is twice defined, the numbers received by the device are no longer sequential and it will stop responding for some time.

The connection is not too good, so you have timeouts etc. Position your device closer to wifi / check in the mihome app if the wifi strength is good enough. Alternatively as described above, double check for multiple connections for single device.

Your device is on a different subnet? This is in most cases not working. Firmware of the device don't accept commands coming from other subnets. Set the communication in the thing configuration to 'cloud'.

Cloud connectivity is not working The most common problem is a wrong userId/password. Try to fix your userId/password. If it still fails, you're bit out of luck. You may try to restart openHAB (not just the binding) to clean the cookies. As the cloud logon process is still little understood, your only luck might be to enable trace logging and see if you can translate the Chinese error code that it returns.

My Roborock vacuum is not found or not reacting Did you link the vacuum with the Roborock app? This won't work, the Roborock app is using a different communication method. Reset your vacuum and connect it to the Xiaomi MiHome app. This will change the communication method and the Mi IO binding can communicate with the vacuum.

# Mi IO Devices

Currently the miio binding supports more than 330 different models.

Device ThingType Device Model Supported Remark
AUX Smart Air Conditioner miio:unsupported aux.aircondition.v1 No
Mi Air Frying Pan miio:basic careli.fryer.maf01 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Fryer (3.5L) miio:basic careli.fryer.maf02 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Frying Pan miio:basic careli.fryer.maf03 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Qingping Air Monitor Lite miio:basic cgllc.airm.cgdn1 Yes
Mi Multifunction Air Monitor miio:basic cgllc.airmonitor.b1 Yes
Qingping Air Monitor miio:basic cgllc.airmonitor.s1 Yes
Mi Universal Remote miio:unsupported chuangmi.ir.v2 No
Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway) miio:basic chuangmi.plug.212a01 Yes
Mi Smart Plug WiFi miio:basic chuangmi.plug.hmi205 Yes
Mi Smart Plug (WiFi) miio:basic chuangmi.plug.hmi206 Yes
Mi Smart Wi-Fi Plug (Bluetooth Gateway) miio:basic chuangmi.plug.hmi208 Yes
Mi Plug Mini miio:basic chuangmi.plug.m1 Yes
Mi Smart Plug (Wi-Fi) Basic miio:basic chuangmi.plug.m3 Yes
Mi Smart Power Plug miio:basic chuangmi.plug.v1 Yes
Mi Smart Power Plug v2 miio:basic chuangmi.plug.v2 Yes
MIJIA Smart Plug Enhanced miio:basic chuangmi.plug.v3 Yes
Mi Remote miio:unsupported chuangmi.remote.v2 No
Mi IH Rice Cooker miio:unsupported chunmi.cooker.normal1 No
Mi IH Rice Cooker miio:unsupported chunmi.cooker.normal2 No
Mi IH Rice Cooker 4L miio:unsupported chunmi.cooker.normal4 No
Mi IH Pressure Rice Cooker miio:unsupported chunmi.cooker.press1 No
Mi IH Pressure Rice Cooker miio:unsupported chunmi.cooker.press2 No
Gosund Smart Plug miio:basic cuco.plug.cp1 Yes
Mi Smart Antibacterial Humidifier miio:basic deerma.humidifier.jsq Yes
Mi S Smart Humidifer miio:basic deerma.humidifier.jsq1 Yes
Mi Smart Antibacterial Humidifier miio:basic deerma.humidifier.jsq5 Yes
Mi Smart Humidifer S miio:basic deerma.humidifier.jsqs Yes
Mi Smart Humidifier miio:basic deerma.humidifier.mjjsq Yes
Mi Fresh Air Ventilator A1-150 miio:basic dmaker.airfresh.a1 Yes
Mi Fresh Air Ventilator miio:basic dmaker.airfresh.t2017 Yes
Mi Smart Standing Fan 2 Lite miio:basic dmaker.fan.1c Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Standing Fan 1X miio:basic dmaker.fan.p5 Yes
Mi Smart Standing Fan 1C miio:basic dmaker.fan.p8 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Tower Fan miio:basic dmaker.fan.p9 Yes
Mi Smart Standing Fan 2 miio:basic dmaker.fan.p10 Yes
Mi Smart Standing Fan Pro miio:basic dmaker.fan.p15 Yes Identified manual actions for execution
action{"did":"off-delay-time-toggle","siid":3,"aiid":1,"in":[]}
Please test and feedback if they are working so they can be linked to a channel.
Mi Smart Standing Fan 2 miio:basic dmaker.fan.p18 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Robot Vacuum Mop 1C STYTJ01ZHM miio:basic dreame.vacuum.mc1808 Yes
Dreame Robot Vacuum-Mop F9 miio:basic dreame.vacuum.p2008 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Robot Vacuum D9 miio:basic dreame.vacuum.p2009 Yes
Dreame Bot W10 miio:basic dreame.vacuum.p2027 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Dreame Bot Z10 Pro miio:basic dreame.vacuum.p2028 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Trouver Robot LDS Vacuum-Mop Finder miio:basic dreame.vacuum.p2036 Yes
Mi Robot Vacuum-Mop 2 Pro+ miio:basic dreame.vacuum.p2041o Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MOVA Z500 Robot Vacuum and Mop Cleaner miio:basic dreame.vacuum.p2156o Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MOVA L600 Robot Vacuum and Mop Cleaner miio:basic dreame.vacuum.p2157 Yes
Dreame Bot D9 Max miio:basic dreame.vacuum.p2259 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ARIES For Bedroom miio:basic huayi.light.ari013 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ARIES For Living Room miio:basic huayi.light.aries Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Fan Light miio:basic huayi.light.fanwy Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Fan Light(2020) miio:basic huayi.light.fanwy2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PEGASUS For Living Room miio:basic huayi.light.peg091 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PEGASUS For Bedroom miio:basic huayi.light.peg093 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PISCES For Bedroom miio:basic huayi.light.pis123 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO PISCES For Living Room miio:basic huayi.light.pisces Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO TAURUS For Bedroom miio:basic huayi.light.tau023 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO TAURUS For Living Room miio:basic huayi.light.taurus Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO VIRGO For Bedroom miio:basic huayi.light.vir063 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO VIRGO For Living Room miio:basic huayi.light.virgo Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Ceiling Light miio:basic huayi.light.wy Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO LIANGCHEN(BLE Mesh) miio:basic huayi.light.wy200 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO SAG Downlight (BLE Mesh) miio:basic huayi.light.wy201 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Bulb (BLE Mesh) miio:basic huayi.light.wy202 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO YONG Downlight (BLE Mesh) miio:basic huayi.light.wy203 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
huayi.light.wy204 miio:basic huayi.light.wy204 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO Heating Lamp miio:basic huayi.light.wyheat Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
HUIZUO ZIWEI Ceiling Lamp miio:basic huayi.light.zw131 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MiJia Rice Cooker miio:unsupported hunmi.cooker.normal3 No
Jinxing Smart Air Conditioner miio:unsupported idelan.aircondition.v1 No
IKEA E27 white spectrum opal miio:lumi ikea.light.led1545g12 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E27 white spectrum clear miio:lumi ikea.light.led1546g12 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E14 white spectrum miio:lumi ikea.light.led1536g5 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA GU10 white spectrum miio:lumi ikea.light.led1537r6 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E27 warm white miio:lumi ikea.light.led1623g12 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA GU10 warm white miio:lumi ikea.light.led1650r5 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
IKEA E14 warm white miio:lumi ikea.light.led1649c5 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Wall Switch(No Neutral, Single Rocker) miio:unsupported lumi.ctrl_neutral1.v1 No
Aqara Wall Switch (No Neutral, Double Rocker) miio:unsupported lumi.ctrl_neutral2.v1 No
Xiaomiyoupin Curtain Controller (Wi-Fi) miio:basic lumi.curtain.hagl05 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier virtual miio:gateway lumi.gateway.mgl03 Experimental Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home Gateway Hub miio:gateway lumi.gateway.mieu01 Yes Used to control the gateway itself. Experimental support for controlling lumi subdevices
Mi smart Home Gateway Hub v1 miio:gateway lumi.gateway.v1 Experimental Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home GatewayHub v2 miio:gateway lumi.gateway.v2 Experimental Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi smart Home Gateway Hub v3 miio:gateway lumi.gateway.v3 Experimental Used to control the gateway itself. Use the mihome binding to control devices connected to the Xiaomi gateway if you have the developer key. Otherwise this binding provides experimental support for lumi subdevices
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara LED Light Bulb (Tunable White) miio:lumi lumi.light.aqcn02 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Door lock miio:lumi lumi.lock.v1 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door Lock miio:lumi lumi.lock.aq1 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door Lock S2 miio:lumi lumi.lock.acn02 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Aqara Door lock S2 Pro miio:lumi lumi.lock.acn03 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Plug (Zigbee) miio:lumi lumi.plug.mmeu01 Yes Needs to have the Xiaomi gateway configured in the binding as bridge.
Mi Window and Door Sensor miio:lumi lumi.sensor_magnet.v2 Yes Needs to have the Xiaomi gateway configured in the binding as bridge. Note: Won't display the current status. Log only'
Mi Motion Sensor miio:lumi lumi.sensor_motion.aq2 Yes Needs to have the Xiaomi gateway configured in the binding as bridge.Note: Won't display the current status, nor trigger events. Log only
Mi Motion Sensor miio:lumi lumi.sensor_motion.v2 Yes Needs to have the Xiaomi gateway configured in the binding as bridge.Note: Won't display the current status, nor trigger events. Log only
Mi Temperature and Humidity Sensor miio:lumi lumi.sensor_ht.v1 Experimental Needs to have the Xiaomi gateway configured in the binding as bridge.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Water Leak Sensor miio:lumi lumi.sensor_wleak.aq1 Yes Needs to have the Xiaomi gateway configured in the binding as bridge.
Aqara Temperature and Humidity Sensor miio:lumi lumi.weather.v1 Yes Needs to have the Xiaomi gateway configured in the binding as bridge.
Midea AC-i Youth miio:unsupported midea.aircondition.v1 No
Midea Air Conditioner v2 miio:unsupported midea.aircondition.v2 No
Midea AC-Cool Golden miio:unsupported midea.aircondition.xa1 No
Mi Robot Vacuum-Mop Essential miio:basic mijia.vacuum.v2 Yes This device may be overwhelmed if refresh is too frequent, slowing down the responses. Suggest to increase refresh time to 120 seconds
Mijia Smart Pet Water Dispenser miio:basic mmgg.pet_waterer.s1 Experimental Identified manual actions for execution
action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]}
action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]}
action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]}
Please test and feedback if they are working so they can be linked to a channel.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Water Dispenser miio:basic mmgg.pet_waterer.s2 Experimental Identified manual actions for execution
action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]}
action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]}
action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]}
Please test and feedback if they are working so they can be linked to a channel.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Smart Pet Water Dispenser miio:basic mmgg.pet_waterer.s3 Experimental Identified manual actions for execution
action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]}
action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]}
action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]}
Please test and feedback if they are working so they can be linked to a channel.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
XIAOWAN Smart Pet Water Dispenser miio:basic mmgg.pet_waterer.s4 Experimental Identified manual actions for execution
action{"did":"filter-reset-filter-life","siid":3,"aiid":1,"in":[]}
action{"did":"filter-cotton-reset-cotton-life","siid":5,"aiid":1,"in":[]}
action{"did":"remain-clean-time-reset-clean-time","siid":6,"aiid":1,"in":[]}
Please test and feedback if they are working so they can be linked to a channel.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BOND miio:basic mrbond.airer.m1pro Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BOND miio:basic mrbond.airer.m1s Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
MR.BOND miio:basic mrbond.airer.m1super Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
WIDETECH WDH318EFW1 Internet Dehumidifier miio:basic nwt.derh.wdh318efw1 Yes
Philips Zhirui Ceiling Lamp Bedroom 40W miio:basic philips.light.bceiling1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Bedroom 28W miio:basic philips.light.bceiling2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiRui E27 bulb miio:basic philips.light.bulb Yes
Philips ZhiRui E14 Candle Lamp Frosted version miio:basic philips.light.candle Yes
Philips ZhiRui E14 Candle Lamp Crystal version miio:basic philips.light.candle2 Yes
Mijia Philips Color Bulb miio:basic philips.light.cbulb Yes
Philips Light miio:basic philips.light.cbulbs Yes
Philips Connected Ceiling miio:basic philips.light.ceiling Yes
Philips Light miio:basic philips.light.dcolor Yes
ZhiRui Dimmable Downlight miio:basic philips.light.dlight Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiRui Downlight miio:basic philips.light.downlight Yes
Philips Wi-Fi bulb E27 White miio:basic philips.light.hbulb Yes
Philips ZhiYi Ceiling Lamp FL 40W miio:basic philips.light.lnblight1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling Lamp FL 28W miio:basic philips.light.lnblight2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling Lamp FL 80W miio:basic philips.light.lnlrlight Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Zhirui Ceiling Lamp Living room 80W miio:basic philips.light.lrceiling Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 80W miio:basic philips.light.mceil Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 40W miio:basic philips.light.mceilm Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Nordic 28W miio:basic philips.light.mceils Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips Smart Lamp miio:basic philips.light.mono1 Yes
Philips ZhiRui Bedside Lamp miio:basic philips.light.moonlight Yes
Zhirui Ceiling Lamp Black 80W miio:basic philips.light.obceil Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Black 40W miio:basic philips.light.obceim Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Black 28W miio:basic philips.light.obceis Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mijia Philips Study Desk Lamp miio:basic philips.light.rwread Yes
Zhirui Ceiling Lamp Starry 80W miio:basic philips.light.sceil Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Starry 40W miio:basic philips.light.sceilm Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Starry 28W miio:basic philips.light.sceils Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips EyeCare Connected Desk Lamp gen2. miio:basic philips.light.sread1 Yes
Mijia Philips Desk Lamp 2S miio:basic philips.light.sread2 Yes
Philips Connected Lights miio:basic philips.light.virtual Yes
Zhirui Ceiling Lamp Gorgeous 80W miio:basic philips.light.xzceil Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Gorgeous 40W miio:basic philips.light.xzceim Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Zhirui Ceiling Lamp Gorgeous 28W miio:basic philips.light.xzceis Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Philips ZhiYi Ceiling lamp miio:basic philips.light.zyceiling Yes
Philips ZhiYi Desk Lamp miio:basic philips.light.zysread Yes
Philips ZhiYi Strip miio:basic philips.light.zystrip Yes
CHINGMI Smart Power Strip v1 miio:basic qmi.powerstrip.v1 Yes
Rockrobo Xiaowa Sweeper v2 miio:unsupported roborock.sweeper.e2v2 No
Rockrobo Xiaowa Sweeper v3 miio:unsupported roborock.sweeper.e2v3 No
Roborock S6 Pure miio:vacuum roborock.vacuum.a08 Yes
Roborock T7 Pro miio:vacuum roborock.vacuum.a09 Yes
Roborock S6 MaxV miio:vacuum roborock.vacuum.a10 Yes
Roborock T7 miio:vacuum roborock.vacuum.a11 Yes
Roborock T7S miio:vacuum roborock.vacuum.a14 Yes
Roborock S7 miio:vacuum roborock.vacuum.a15 Yes
Roborock S4 Max miio:vacuum roborock.vacuum.a19 Yes
Roborock T7S Plus miio:vacuum roborock.vacuum.a23 Yes
Xiaowa C1 miio:vacuum roborock.vacuum.c1 Yes
Roborock Xiaowa E Series Vacuum v2 miio:unsupported roborock.vacuum.e2 No
Mi Robot Vacuum 1S miio:vacuum roborock.vacuum.m1s Yes
Roborock P5 miio:vacuum roborock.vacuum.p5 Yes
Roborock S4 miio:vacuum roborock.vacuum.s4 Yes
Roborock Vacuum S4v2 miio:vacuum roborock.vacuum.s4v2 Yes
Roborock S5 miio:vacuum roborock.vacuum.s5 Yes
Roborock S5 Max miio:vacuum roborock.vacuum.s5e Yes
Roborock S6 miio:vacuum roborock.vacuum.s6 Yes
Roborock T4 miio:vacuum roborock.vacuum.t4 Yes
Roborock Vacuum T4 v2 miio:vacuum roborock.vacuum.t4v2 Yes
Roborock Vacuum T4 v3 miio:vacuum roborock.vacuum.t4v3 Yes
Roborock T6 miio:vacuum roborock.vacuum.t6 Yes
Roborock Vacuum T6 v2 miio:vacuum roborock.vacuum.t6v2 Yes
Roborock Vacuum T6 v3 miio:vacuum roborock.vacuum.t6v3 Yes
Roborock Vacuum T7 miio:vacuum roborock.vacuum.t7 Yes
Roborock Vacuum T7p miio:vacuum roborock.vacuum.t7p Yes
Roborock Vacuum T7 v2 miio:vacuum roborock.vacuum.t7pv2 Yes
Roborock Vacuum T7 v3 miio:vacuum roborock.vacuum.t7pv3 Yes
Roborock Vacuum T7 v2 miio:vacuum roborock.vacuum.t7v2 Yes
Roborock Vacuum T7 v3 miio:vacuum roborock.vacuum.t7v3 Yes
Roborock Vacuum S6 miio:vacuum rockrobo.vacuum.s6 Yes
Mi Robot Vacuum miio:vacuum rockrobo.vacuum.v1 Yes
ROIDMI EVE vacuum miio:basic roidmi.vacuum.v60 Yes
PTX OneKey Switch (WIFI) miio:basic 090615.switch.xswitch01 Yes
PTX Twokey switch(wifi) miio:basic 090615.switch.xswitch02 Yes
PTX ThreeKey Switch (WIFI) miio:basic 090615.switch.xswitch03 Yes
SCISHARE Smart Capsule Coffee Machine miio:basic scishare.coffee.s1102 Experimental This device does not allow for regular querying for the status. Hence the status is not updated for the action channels.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Xiaomi Scishare Smart Capsule Coffee Machine miio:basic scishare.coffee.s1301 Experimental This device does not allow for regular querying for the status. Hence the status is not updated for the action channels.
Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Soocare Electric Toothbrush miio:unsupported soocare.toothbrush.x3 No
Viomi Internet Refrigerator iLive(French style 462L) miio:unsupported viomi.fridge.v3 No
Viomi Cleaning Robot V-RVCLM21B miio:basic viomi.vacuum.v6 Yes
Mi Robot Vacuum-Mop P miio:basic viomi.vacuum.v7 Yes
Mi Robot Vacuum-Mop P miio:basic viomi.vacuum.v8 Yes
Viomi S9 miio:basic viomi.vacuum.v18 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
VIOMI Internet Electric Water Heater 1A (60L) miio:basic viomi.waterheater.e1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Inverter Air Conditioner (1.5HP) miio:basic xiaomi.aircondition.ma1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1) miio:basic xiaomi.aircondition.ma2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Vertical Air Conditioner (2HP) miio:basic xiaomi.aircondition.ma4 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1) miio:basic xiaomi.aircondition.ma5 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3) miio:basic xiaomi.aircondition.ma6 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1) miio:basic xiaomi.aircondition.ma9 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1) miio:basic xiaomi.aircondition.mc1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1) miio:basic xiaomi.aircondition.mc2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1) miio:basic xiaomi.aircondition.mc4 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1) miio:basic xiaomi.aircondition.mc5 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1) miio:basic xiaomi.aircondition.mc6 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1) miio:basic xiaomi.aircondition.mc7 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3) miio:basic xiaomi.aircondition.mc8 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3) miio:basic xiaomi.aircondition.mc9 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1) miio:basic xiaomi.aircondition.c10 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1) miio:basic xiaomi.aircondition.c11 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1) miio:basic xiaomi.aircondition.mh1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1) miio:basic xiaomi.aircondition.mh2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3) miio:basic xiaomi.aircondition.mh3 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1) miio:basic xiaomi.aircondition.mt1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1) miio:basic xiaomi.aircondition.mt2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1) miio:basic xiaomi.aircondition.mt3 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1) miio:basic xiaomi.aircondition.mt4 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1) miio:basic xiaomi.aircondition.mt5 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1) miio:basic xiaomi.aircondition.mt7 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1) miio:basic xiaomi.aircondition.mt8 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Wi-Fi Repeater 2 miio:unsupported xiaomi.repeater.v2 No
Mi Network Speaker miio:unsupported xiaomi.wifispeaker.v1 No
Uclean Smart Toilet Seat miio:basic xjx.toilet.pro Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Uclean Smart Toilet pure miio:basic xjx.toilet.pure Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Uclean Smart Toilet relax miio:basic xjx.toilet.relax Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Whale Spout Smart Toilet Zero miio:basic xjx.toilet.zero Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Smart Bath Heater miio:unsupported yeelight.bhf_light.v2 No
Yeelight Smart Bath Heater Pro miio:basic yeelink.bhf_light.v1 Yes
Yeelight Smart Bath Heater miio:basic yeelink.bhf_light.v2 Yes
Mi Bedside Lamp miio:basic yeelink.light.bslamp1 Yes
Mi Bedside Lamp 2 miio:basic yeelink.light.bslamp2 Yes
Yeelight Bedside Lamp II miio:basic yeelink.light.bslamp3 Yes
Yeelight Ceiling Light miio:basic yeelink.light.ceiling1 Yes
Yeelight Ceiling Light SE miio:basic yeelink.light.ceiling2 Yes
Yeelight LED Ceiling Light miio:basic yeelink.light.ceiling3 Yes
Yeelight LED Ceiling Light miio:basic yeelink.light.ceiling4 Yes
Yeelight LED Ceiling Ambi Lamp miio:basic yeelink.light.ceiling4.ambi Yes
Mi LED Ceiling Light miio:basic yeelink.light.ceiling5 Yes
Yeelight HaoShi LED Ceiling Lamp Pro miio:basic yeelink.light.ceiling6 Yes
Yeelight Haoshi Ceiling Lamp miio:basic yeelink.light.ceiling7 Yes
LED Ceiling Light Crystal Plus miio:basic yeelink.light.ceiling8 Yes
Yeelight HaoShi LED Ceiling Lamp Pro miio:basic yeelink.light.ceiling9 Yes
Yeelight Crystal Pendant Lamp miio:basic yeelink.light.ceiling10 Yes
Yeelight LED Ceiling Ambi Lamp miio:basic yeelink.light.ceiling10.ambi Yes
Yeelight Ceiling Light 320 1S miio:basic yeelink.light.ceiling11 Yes
Yeelight Stylized Ceiling Light Pro miio:basic yeelink.light.ceiling12 Yes
Yeelight Ceiling Light miio:basic yeelink.light.ceiling13 Yes
Yeelight Ceiling Light Mini miio:basic yeelink.light.ceiling14 Yes
Yeelight Ceiling Light 480 1S miio:basic yeelink.light.ceiling15 Yes
Yeelight Xingyu Ceiling Light miio:basic yeelink.light.ceiling16 Yes
Yeelight ShaoHua Celing Light miio:basic yeelink.light.ceiling17 Yes
Yeelight Ceiling Light Pro miio:basic yeelink.light.ceiling18 Yes
Yeelight Ceiling Light Pro miio:basic yeelink.light.ceiling19 Yes
Yeelight LED Ceiling Ambi Lamp miio:basic yeelink.light.ceiling19.ambi Yes
Yeelight Ceiling Light miio:basic yeelink.light.ceiling20 Yes
Yeelight LED Ceiling Ambi Lamp miio:basic yeelink.light.ceiling20.ambi Yes
Mi Smart LED Living Room Ceiling Light miio:basic yeelink.light.ceiling21 Yes
Mi Smart LED Ceiling Light miio:basic yeelink.light.ceiling22 Yes
Mi Smart LED Ceiling Light (350mm) miio:basic yeelink.light.ceiling23 Yes
Yeelight Jade Smart LED Ceiling Light C2001 miio:basic yeelink.light.ceil26 Yes
Yeelight Color Bulb miio:basic yeelink.light.color1 Yes
Yeelight LED Bulb (Color) miio:basic yeelink.light.color2 Yes
Mi LED Smart Bulb (White and Color) miio:basic yeelink.light.color3 Yes
Yeelight LED Bulb 1S(Color) miio:basic yeelink.light.color4 Yes
Mi Smart LED Bulb Essential (White and Color) miio:basic yeelink.light.color5 Yes
Yeelight Smart LED Bulb 1SE (color) miio:basic yeelink.light.colora Yes
Yeelight LED Bulb (Tunable) miio:basic yeelink.light.ct2 Yes
Mi LED Desk Lamp miio:basic yeelink.light.lamp1 Yes
Mi Smart LED Desk Lamp Pro miio:basic yeelink.light.lamp2 Yes
Yeelight LED Lamp miio:basic yeelink.light.lamp3 Yes
Mi LED Desk Lamp 1S miio:basic yeelink.light.lamp4 Yes
Yeelight Smart Desk Lamp Prime miio:basic yeelink.light.lamp5 Yes
Yeelight miio:basic yeelink.light.lamp6 Yes
Yeelight LED Light Sensor Desk Lamp V1 miio:basic yeelink.light.lamp7 Yes
Yeelight miio:basic yeelink.light.lamp8 Yes
Yeelight Star LED Table Lamp miio:basic yeelink.light.lamp9 Yes
Yeelight Star Floor Lamp miio:basic yeelink.light.lamp10 Yes
Yeelight Screen Light Bar miio:basic yeelink.light.lamp15 Yes
Yeelight Bulb miio:basic yeelink.light.mono1 Yes
Yeelight White Bulb v2 miio:basic yeelink.light.mono2 Yes
Yeelight LED Bulb 1S(Dimmable) miio:basic yeelink.light.mono4 Yes
Yeelight LED Filament Bulb miio:basic yeelink.light.mono5 Yes
Mi Smart LED Bulb miio:basic yeelink.light.mono6 Yes
Yeelight LED smart bulb W3(dimmable) miio:basic yeelink.light.monoa Yes
Yeelight GU10 Smart Bulb W1(dimmable) miio:basic yeelink.light.monob Yes
Yeelight Whiteglow Panel Light miio:basic yeelink.light.panel1 Yes
Yeelight Lightstrip miio:basic yeelink.light.strip1 Yes
Yeelight Lightstrip Plus miio:basic yeelink.light.strip2 Yes
Yeelight Willow LED Lightstrip miio:basic yeelink.light.strip4 Yes
Light Group (Mi & Yeelight) miio:basic yeelink.light.virtual Yes
Yeelight Smart Dual Control Module miio:basic yeelink.switch.sw1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Yeelight Smart Speaker miio:unsupported yeelink.wifispeaker.v1 No
Yilai Ceiling Light Aiyue 480 miio:basic yilai.light.ceiling1 Yes
Yilai Ceiling Lamp Hefeng 430 miio:basic yilai.light.ceiling2 Yes
Yilai Ceiling Lamp Hefeng Pro miio:basic yilai.light.ceiling3 Yes
Mi Water Purifier lx2 miio:basic yunmi.waterpuri.lx2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under Counter) miio:basic yunmi.waterpuri.lx3 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier lx4 miio:basic yunmi.waterpuri.lx4 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 1A/400G Pro miio:basic yunmi.waterpuri.lx5 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under Counter) miio:basic yunmi.waterpuri.lx6 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 500G/500G Pro miio:basic yunmi.waterpuri.lx7 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier 600G miio:basic yunmi.waterpuri.lx8 Yes
Mi Water Purifier D1 miio:basic yunmi.waterpuri.lx9 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier lx10 miio:basic yunmi.waterpuri.lx10 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier C1 (Triple Setting) miio:basic yunmi.waterpuri.lx11 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier S1 miio:basic yunmi.waterpuri.lx12 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v1 miio:basic yunmi.waterpurifier.v1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v2 miio:basic yunmi.waterpurifier.v2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier (Under sink) v3 miio:basic yunmi.waterpurifier.v3 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Water Purifier v4 miio:basic yunmi.waterpurifier.v4 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Ventilation System miio:basic zhimi.airfresh.va2 Yes
Smartmi Fresh Air System (Heating) miio:basic zhimi.airfresh.va4 Yes
Mi Fresh Air Ventilator C1-80 miio:basic zhimi.airfresh.ua1 Yes
Mi PM2.5 Air Quality Monitor miio:basic zhimi.airmonitor.v1 Yes
Mi Air Purifier 3C miio:basic zhimi.airp.mb4a Yes
Mi Air Purifier 2 (mini) miio:basic zhimi.airpurifier.m1 Yes
Mi Air Purifier 2 miio:basic zhimi.airpurifier.m2 Yes
Mi Air Purifier 2S miio:basic zhimi.airpurifier.ma1 Yes
Mi Air Purifier 2S miio:basic zhimi.airpurifier.ma2 Yes
Mi Air Purifier 3 miio:basic zhimi.airpurifier.ma4 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 2S miio:basic zhimi.airpurifier.mb1 Yes
Mi Air Purifier 3/3H miio:basic zhimi.airpurifier.mb3 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Air Purifier 3C miio:basic zhimi.airpurifier.mb4 Yes
Mi Air Purifier 2S miio:basic zhimi.airpurifier.mc1 Yes
Mi Air Purifier 2H miio:basic zhimi.airpurifier.mc2 Yes
Mi Air Purifier Super miio:basic zhimi.airpurifier.sa1 Yes
Mi Air Purifier MAX / MAX Pro miio:basic zhimi.airpurifier.sa2 Yes
Mi Air Purifier v1 miio:basic zhimi.airpurifier.v1 Yes
Mi Air Purifier v2 miio:basic zhimi.airpurifier.v2 Yes
Mi Air Purifier v3 miio:basic zhimi.airpurifier.v3 Yes
Mi Air Purifier v5 miio:basic zhimi.airpurifier.v5 Yes
Mi Air Purifier Pro v6 miio:basic zhimi.airpurifier.v6 Yes
Mi Air Purifier Pro v7 miio:basic zhimi.airpurifier.v7 Yes
Mi Air Purifier Pro H miio:basic zhimi.airpurifier.vb2 Yes
Mi Air Purifier virtual miio:unsupported zhimi.airpurifier.virtual No
Mi Air Purifier 2(Virtual) miio:unsupported zhimi.airpurifier.vtl_m1 No
Smartmi Air Purifier miio:basic zhimi.airpurifier.za1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Standing Fan miio:basic zhimi.fan.sa1 Yes
Mi Smart Fan miio:basic zhimi.fan.v1 Yes
Smartmi DC Pedestal Fan miio:basic zhimi.fan.v2 Yes
Smartmi DC Pedestal Fan miio:basic zhimi.fan.v3 Yes
Smartmi Inverter Pedestal Fan miio:basic zhimi.fan.za1 Yes
Smartmi Standing Fan 2 miio:basic zhimi.fan.za3 Yes
Smartmi Standing Fan 2S miio:basic zhimi.fan.za4 Yes
Smartmi Standing Fan 3 miio:basic zhimi.fan.za5 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Space Heater S miio:basic zhimi.heater.ma2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Baseboard Heater E miio:basic zhimi.heater.ma3 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Mi Smart Space Heater S miio:basic zhimi.heater.mc2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Fan miio:basic zhimi.heater.na1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Fan Heater miio:basic zhimi.heater.nb1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Radiant Heater Smart Version miio:basic zhimi.heater.za1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Convector Heater 1S miio:basic zhimi.heater.za2 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Smart Convector Heater 1S miio:basic zhimi.heater.zb1 Experimental Experimental support. Please report back if all channels are functional. Preferably share the debug log of property refresh and command responses
Smartmi Evaporative Humidifier miio:basic zhimi.humidifier.ca1 Yes
Smartmi Evaporative Humidifer 2 miio:basic zhimi.humidifier.ca4 Yes
Smartmi Evaporative Humidifier miio:basic zhimi.humidifier.cb1 Yes
Smartmi Evaporative Humidifier miio:basic zhimi.humidifier.cb2 Yes
Smartmi Humidifier miio:basic zhimi.humidifier.v1 Yes
Mi AI Alarm miio:unsupported zimi.clock.myk01 No
Mi Smart Power Strip miio:basic zimi.powerstrip.v2 Yes

note: Supported means we received feedback from users this device is working with the binding. For devices with experimental support, we did not yet confirmation that channels are correctly working. Please feedback your findings for these devices (e.g. Are all channels working, do they contain the right information, is controlling the devices working etc.)

# Channels

Depending on the device, different channels are available.

All devices have available the following channels (marked as advanced) besides the device specific channels

Channel Type Description
network#ssid String Network SSID
network#bssid String Network BSSID
network#rssi Number Network RSSI
network#life Number Network Life
actions#commands String send commands direct. see below
actions#rpc String send commands via cloud. see below

note: the ADVANCED actions#commands and actions#rpc channels can be used to send commands that are not automated via the binding. This is available for all devices e.g. openhab:send actionCommand 'upd_timer["1498595904821", "on"]' would enable a pre-configured timer. See https://github.com/marcelrv/XiaomiRobotVacuumProtocol (opens new window) for all known available commands.

# Robo Rock vacuum Channels

Type Channel Description
Number status#segment_status Segment Status
Number status#map_status Map Box Status
Number status#led_status Led Box Status
String info#carpet_mode Carpet Mode details
String info#fw_features Firmware Features
String info#room_mapping Room Mapping details
String info#multi_maps_list Maps Listing details

Additionally depending on the capabilities of your robot vacuum other channels may be enabled at runtime

Type Channel Description
Switch status#water_box_status Water Box Status
Switch status#lock_status Lock Status
Number status#water_box_mode Water Box Mode
Switch status#water_box_carriage_status Water Box Carriage Status
Switch status#mop_forbidden_enable Mop Forbidden
Switch status#is_locating Robot is locating
Number actions#segment Room Clean (enter room #)

Note: cleaning map is only available with cloud access.

There are several advanced channels, which may be useful in rules (e.g. for individual room cleaning etc) In case your vacuum does not support one of these commands, it will show "unsupported_method" for string channels or no value for numeric channels.

# Advanced: Vacuum Map Customization

In case the default rendering of the vacuum map is not meeting your integration needs, the rendering can be tailored. The way to customize this is to create a file with the name mapConfig.json in the userdata/miio folder. If the binding finds this file it will read the map rendering preferences from there. If the file is available but invalid json, it will create a new file with all the default values for you to customize. This allows you to control the colors, if logo is displayed, if and what text is rendered etc. To (re-)read the file either restart openHAB, restart the binding or alternatively edit the thing and make (any) minor change. Note, cropping is disabled (hence showing like the maps in OH3.1 and earlier) for any cropBorder value < 0. Note, not all the values need to be in the json file, e.g. a subset of the parameters also works, the parameters not in the mapConfig.json will take the default values.

# Mi Air Frying Pan (careli.fryer.maf01) Channels

Channel Type Description Comment
actions String Actions Value mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-cook"="Custom Start Cook","custom-resume-cook"="Custom Resume Cook"]
status Number Air Fryer - Status Value mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
fault Number Air Fryer - Device Fault Value mapping ["0"="No Faults","1"="E1","2"="E2"]
target_time Number:Time Air Fryer - Target Time
target_temperature Number:Temperature Air Fryer - Target Temperature
left_time Number:Time Air Fryer - Left Time
recipe_id String Custom - Recipe Id
recipe_name String Custom - Recipe Name
work_time Number:Time Custom - Work Time
work_temp Number:Temperature Custom - Work Temp
appoint_time Number:Time Custom - Appoint Time
food_quantity Number Custom - Food Quantity Value mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switch Number Custom - Preheat Switch Value mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_left Number:Time Custom - Appoint Time Left
recipe_sync String Custom - Recipe Sync
turn_pot Number Custom - Turn Pot Value mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

# Mi Smart Air Fryer (3.5L) (careli.fryer.maf02) Channels

Channel Type Description Comment
actions String Actions Value mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-custom-cook"="Custom Start Custom Cook","custom-resume-cooking"="Custom Resume Cooking"]
status Number Air Fryer - Status Value mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
fault Number Air Fryer - Device Fault Value mapping ["0"="No Faults","1"="E1","2"="E2"]
target_time Number:Time Air Fryer - Target Time
target_temperature Number:Temperature Air Fryer - Target Temperature
left_time Number:Time Air Fryer - Left Time
recipe_id String Custom - Recipe Id
work_time Number:Time Custom - Work Time
work_temp Number:Temperature Custom - Work Temp
appoint_time Number:Time Custom - Appoint Time
food_quantity Number Custom - Food Quantity Value mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switch Number Custom - Preheat Switch Value mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_left Number:Time Custom - Appoint Time Left
turn_pot Number Custom - Turn Pot Value mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

# Mi Air Frying Pan (careli.fryer.maf03) Channels

Channel Type Description Comment
actions String Actions Value mapping ["air-fryer-start-cook"="Air Fryer Start Cook","air-fryer-cancel-cooking"="Air Fryer Cancel Cooking","air-fryer-pause"="Air Fryer Pause","custom-start-cook"="Custom Start Cook","custom-resume-cook"="Custom Resume Cook"]
status Number Air Fryer - Status Value mapping ["0"="Shutdown","1"="Standby","2"="Pause","3"="Appointment","4"="Cooking","5"="Preheat ","6"="Cooked","7"="Preheat Finish","8"="Preheat Pause","9"="Pause2"]
fault Number Air Fryer - Device Fault Value mapping ["0"="No Faults","1"="E1","2"="E2"]
target_time Number:Time Air Fryer - Target Time
target_temperature Number:Temperature Air Fryer - Target Temperature
left_time Number:Time Air Fryer - Left Time
recipe_id String Custom - Recipe Id
recipe_name String Custom - Recipe Name
work_time Number:Time Custom - Work Time
work_temp Number:Temperature Custom - Work Temp
appoint_time Number:Time Custom - Appoint Time
food_quantity Number Custom - Food Quantity Value mapping ["0"="Null","1"="Single","2"="Double","3"="Half","4"="Full"]
preheat_switch Number Custom - Preheat Switch Value mapping ["0"="Null","1"="Off","2"="On"]
appoint_time_left Number:Time Custom - Appoint Time Left
recipe_sync String Custom - Recipe Sync
turn_pot Number Custom - Turn Pot Value mapping ["1"="Switch Off","0"="Not Turn Pot","2"="Turn Pot"]

# Qingping Air Monitor Lite (cgllc.airm.cgdn1) Channels

Channel Type Description Comment
actions String Actions Value mapping ["settings-set-start-time"="Set Start Time","settings-set-end-time"="Set End Time","settings-set-frequency"="Set Frequency","settings-set-screen-off"="Set Screen Off","settings-set-device-off"="Set Device Off","settings-set-temp-unit"="Set Temp Unit"]
relative_humidity Number:Dimensionless Environment - Relative Humidity
pm2_5_density Number:Density Environment - PM2 5 Density
pm10_density Number:Density Environment - PM10 Density
temperature Number:Temperature Environment - Temperature
co2_density Number:Density Environment - CO2 Density
battery_level Number:Dimensionless Battery - Battery Level
charging_state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not charging","3"="Not chargeable"]
voltage Number:ElectricPotential Battery - Voltage
mac String Mac - Mac
monitoring_frequency Number:Time Settings - Monitoring Frequency Value mapping ["1"="Second","60"="Second","300"="Second","600"="Second","0"="Null"]
screen_off Number:Time Settings - Screen Off Value mapping ["15"="Second","30"="Second","60"="Second","300"="Second","0"="Null"]
device_off Number:Time Settings - Device Off Value mapping ["15"="Minute","30"="Minute","60"="Minute","0"="Null"]
tempature_unit String Settings - Tempature Unit

# Mi Multifunction Air Monitor (cgllc.airmonitor.b1) Channels

Channel Type Description Comment
battery Number Battery
pm25 Number PM2.5
co2 Number CO2e
tvoc Number tVOC
humidity Number:Dimensionless Humidity
temperature Number:Temperature Temperature

# Qingping Air Monitor (cgllc.airmonitor.s1) Channels

Channel Type Description Comment
battery Number Battery
pm25 Number PM2.5
co2 Number CO2
tvoc Number tVOC
humidity Number:Dimensionless Humidity
temperature Number:Temperature Temperature

# Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway) (chuangmi.plug.212a01) Channels

Channel Type Description Comment
on Switch Power
temperature Number:Temperature Temperature
working-time Number:Time Working Time
on1 Switch Indicator Light - Switch Status
power-consumption Number:Energy Daily Power Consumption
electric-current Number:Current Power Consumption - Electric Current
voltage Number:ElectricPotential Power Consumption - Voltage
electric-power Number:Power Current Power Consumption - Electric Power
on-duration Number:Time Imilab Timer - On Duration
off-duration Number:Time Imilab Timer - Off Duration
countdown Number:Time Imilab Timer - Countdown
task-switch Switch Imilab Timer - Task Switch
countdown-info Switch Imilab Timer - Countdown Info
bt-gw String BT Gateway Value mapping ["disable"="Disable","enable"="Enable"]
bt-gw-devices String Connected BT Gateway Devices Note, refreshes every 2nd refresh. Channel requires cloud connectivity to function. Sample widget to visualise the (json) output available from the widget market

# Mi Smart Plug WiFi (chuangmi.plug.hmi205) Channels

Channel Type Description Comment
power Switch Power
temperature Number:Temperature Temperature
led Switch Indicator light

# Mi Smart Plug (WiFi) (chuangmi.plug.hmi206) Channels

Channel Type Description Comment
power Switch Power If this channel does not respond to on/off upgrade firmware
usb Switch USB
temperature Number:Temperature Temperature
led Switch Wifi LED

# Mi Smart Wi-Fi Plug (Bluetooth Gateway) (chuangmi.plug.hmi208) Channels

Channel Type Description Comment
power Switch Power If this channel does not respond to on/off upgrade firmware
usb Switch USB
temperature Number:Temperature Temperature
led Switch Wifi LED

# Mi Plug Mini (chuangmi.plug.m1) Channels

Channel Type Description Comment
power Switch Power
temperature Number:Temperature Temperature
led Switch Indicator light

# Mi Smart Plug (Wi-Fi) Basic (chuangmi.plug.m3) Channels

Channel Type Description Comment
power Switch Power
temperature Number:Temperature Temperature
led Switch Indicator light

# Mi Smart Power Plug (chuangmi.plug.v1) Channels

Channel Type Description Comment
power Switch Power
usb Switch USB
temperature Number:Temperature Temperature

# Mi Smart Power Plug v2 (chuangmi.plug.v2) Channels

Channel Type Description Comment
power Switch Power
usb Switch USB

# MIJIA Smart Plug Enhanced (chuangmi.plug.v3) Channels

Channel Type Description Comment
power Switch Power If this channel does not respond to on/off upgrade firmware
usb Switch USB
temperature Number:Temperature Temperature
led Switch Wifi LED

# Gosund Smart Plug (cuco.plug.cp1) Channels

Channel Type Description Comment
FirmwareRevision String Device Information-CurrentFirmware Version
Manufacturer String Device Information-Device Manufacturer
Model String Device Information-Device Model
SerialNumber String Device Information-Device Serial Number
On Switch Switch-Switch Status

# Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq) Channels

Channel Type Description Comment
power Switch Power
mode Number Mode Value mapping ["1"="Low","2"="Medium","3"="High","4"="Humidity "]
humidity Number:Dimensionless Humidity
humidity_set Number:Dimensionless Humidity Setting
led Switch LED indicator Light
sound Switch Notification Sounds
watertankstatus Number Watertank Status

# Mi S Smart Humidifer (deerma.humidifier.jsq1) Channels

Channel Type Description Comment
power Switch Power
mode Number Mode Value mapping ["1"="Low","2"="Medium","3"="High","4"="Humidity "]
humidity Number:Dimensionless Humidity
humidity_set Number:Dimensionless Humidity Setting
led Switch LED indicator Light
sound Switch Notification Sounds
watertankstatus Number Watertank Status
wet_and_protect Switch Wet and Protect

# Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq5) Channels

Channel Type Description Comment
on Switch Humidifier - Switch Status
fault Number Humidifier - Device Fault Value mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Separation"]
fan_level Number Humidifier - Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Humidity"]
target_humidity Number:Dimensionless Humidifier - Target Humidity
relative_humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
water_shortage_fault Switch Custom - Water Shortage Fault
the_tank_filed Switch Custom - The Tank Filed

# Mi Smart Humidifer S (deerma.humidifier.jsqs) Channels

Channel Type Description Comment
on Switch Humidifier - Switch Status
fault Number Humidifier - Device Fault Value mapping ["0"="No Faults","1"="Insufficient Water","2"="Water Separation"]
fan_level Number Humidifier - Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Humidity"]
target_humidity Number:Dimensionless Humidifier - Target Humidity
relative_humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
water_shortage_fault Switch Custom - Water Shortage Fault
the_tank_filed Switch Custom - The Tank Filed

# Mi Smart Humidifier (deerma.humidifier.mjjsq) Channels

Channel Type Description Comment
power Switch Power
mode Number Mode Value mapping ["1"="Low","2"="Medium","3"="High","4"="Humidity "]
humidity Number:Dimensionless Humidity
humidity_set Number:Dimensionless Humidity Setting
led Switch LED indicator Light
sound Switch Notification Sounds
watertankstatus Number Watertank Status

# Mi Fresh Air Ventilator A1-150 (dmaker.airfresh.a1) Channels

Channel Type Description Comment
power Switch Power
airFreshMode String Mode Value mapping ["auto"="Auto","sleep"="Sleep","favourite"="Favorite"]
airFreshPTCPower Switch PTC
airFreshPTCStatus Switch PTC Status
airFreshDisplay Switch Display
airFreshChildLock Switch Child Lock
airFreshSound Switch Sound
airFreshPM25 Number PM2.5
airFreshCO2 Number CO2
airFreshCurrentSpeed Number Current Speed
airFreshFavoriteSpeed Number Favorite Speed
airFreshTemperature Number Temperature Outside
airFreshFilterPercents Number Filter Percents Remaining
airFreshFilterDays Number Filter Days Remaining
airFreshResetFilterA1 String Reset Filter

# Mi Fresh Air Ventilator (dmaker.airfresh.t2017) Channels

Channel Type Description Comment
power Switch Power
airFreshMode String Mode Value mapping ["auto"="Auto","sleep"="Sleep","favourite"="Favorite"]
airFreshPTCPower Switch PTC
airFreshPtcLevel String PTC Level Value mapping ["low"="Low","medium"="Medium","high"="High"]
airFreshPTCStatus Switch PTC Status
airFreshDisplayDirection String Screen direction Value mapping ["forward"="Normal","left"="Left","right"="Right"]
airFreshDisplay Switch Display
airFreshChildLock Switch Child Lock
airFreshSound Switch Sound
airFreshPM25 Number PM2.5
airFreshCO2 Number CO2
airFreshCurrentSpeed Number Current Speed
airFreshFavoriteSpeed Number Favorite Speed
airFreshTemperature Number Temperature Outside
airFreshFilterPercents Number Filter Percents Remaining
airFreshFilterDays Number Filter Days Remaining
airFreshFilterProPercents Number Filter Pro Percents Remaining
airFreshFilterProDays Number Filter Pro Days Remaining
airFreshResetFilter String Reset Filter

# Mi Smart Standing Fan 2 Lite (dmaker.fan.1c) Channels

Channel Type Description Comment
actions String Actions Value mapping ["fan-toggle"="Fan Toggle"]
On Switch Fan - Switch Status
FanLevel Number Fan-Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
HorizontalSwing Switch Fan-Horizontal Swing
Mode Number Fan-Mode Value mapping ["0"="Straight Wind","1"="Sleep"]
OffDelayTime Number:Time Fan-Power Off Delay Time
Alarm Switch Fan-Alarm
Brightness Switch Fan-Brightness
PhysicalControlsLocked Switch Physical Control Locked-Physical Control Locked

# Mi Smart Standing Fan 1X (dmaker.fan.p5) Channels

Channel Type Description Comment
power Switch Power
roll Switch Rotation
mode Number Mode
angle Number Angle
timer Number Timer
beep Switch Beep Sound
light Number Light
child_lock Switch Child Lock
speed Number Speed

# Mi Smart Standing Fan 1C (dmaker.fan.p8) Channels

Channel Type Description Comment
actions String Actions Value mapping ["fan-toggle"="Fan Toggle"]
On Switch Fan - Switch Status
FanLevel Number Fan-Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
HorizontalSwing Switch Fan-Horizontal Swing
Mode Number Fan-Mode Value mapping ["0"="Straight Wind","1"="Sleep"]
OffDelayTime Number:Time Fan-Power Off Delay Time
Alarm Switch Fan-Alarm
Brightness Switch Fan-Brightness
PhysicalControlsLocked Switch Physical Control Locked-Physical Control Locked

# Mi Smart Tower Fan (dmaker.fan.p9) Channels

Channel Type Description Comment
actions String Actions Value mapping ["fan-toggle"="Fan Toggle"]
On Switch Fan-Switch Status
FanLevel Number Fan-Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
Mode Number Fan-Mode Value mapping ["0"="Straight Wind","1"="Natural Wind","2"="Sleep"]
HorizontalSwing Switch Fan-Horizontal Swing
HorizontalAngle Number Fan-Horizontal Angle Value mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
Alarm Switch Fan-Alarm
OffDelayTime Number:Time Fan - Power Off Delay Time
Brightness Switch Fan-Brightness
MotorControl Number Fan-Motor Control
SpeedLevel Number Fan-Speed Level
PhysicalControlsLocked Switch Physical Control Locked-Physical Control Locked

# Mi Smart Standing Fan 2 (dmaker.fan.p10) Channels

Channel Type Description Comment
actions String Actions Value mapping ["fan-toggle"="Fan Toggle"]
On Switch Fan-Switch Status
FanLevel Number Fan-Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
Mode Number Fan-Mode Value mapping ["0"="Straight Wind","1"="Natural Wind","2"="Sleep"]
HorizontalSwing Switch Fan-Horizontal Swing
HorizontalAngle Number Fan-Horizontal Angle Value mapping ["30"="30","60"="60","90"="90","120"="120","150"="150"]
Alarm Switch Fan-Alarm
OffDelayTime Number:Time Fan - Power Off Delay Time
Brightness Switch Fan-Brightness
MotorControl Number Fan-Motor Control
SpeedLevel Number Fan-Speed Level
PhysicalControlsLocked Switch Physical Control Locked-Physical Control Locked

# Mi Smart Standing Fan Pro (dmaker.fan.p15) Channels

Channel Type Description Comment
on Switch Fan - Switch Status
fan_level Number Fan - Gear Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
mode Number Fan - Mode Value mapping ["0"="Straight Wind","1"="Natural Wind"]
horizontal_swing Switch Fan - Horizontal Swing
horizontal_angle Number Fan - Horizontal Angle Value mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
status Number Fan - Status
on1 Switch Indicator Light - Switch Status
alarm Switch Alarm - Alarm
fault Number Motor Controller - Device Fault Value mapping ["0"="No Faults"]
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
off_delay_time Number:Time Off Delay Time - Off Delay Time
actions String Actions Value mapping ["off-delay-time-toggle"="Off Delay Time Toggle"]

# Mi Smart Standing Fan 2 (dmaker.fan.p18) Channels

Channel Type Description Comment
actions String Actions Value mapping ["fan-toggle"="Fan Toggle"]
on Switch Fan - Switch Status
fan_level Number Fan - Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3","4"="Level4"]
mode Number Fan - Mode Value mapping ["0"="Straight Wind","1"="Natural Wind"]
horizontal_swing Switch Fan - Horizontal Swing
horizontal_angle Number Fan - Horizontal Angle Value mapping ["30"="30","60"="60","90"="90","120"="120","140"="140"]
off_delay_time Number:Time Fan - Power Off Delay Time
brightness Switch Fan - Brightness
alarm Switch Fan - Alarm
motor_control Number Fan - Motor Control Value mapping ["0"="NO","1"="LEFT","2"="RIGHT"]
speed_level Number Fan - Speed Level
physical_controls_locked Switch Physical Control Locked - Physical Control Locked

# Mi Robot Vacuum Mop 1C STYTJ01ZHM (dreame.vacuum.mc1808) Channels

Channel Type Description Comment
vacuumaction String Vacuum Action Value mapping ["vacuum"="Vacuum","stop"="Stop","sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock"]
BatteryLevel Number Battery-Battery Level
ChargingState Number Battery-Charging State Value mapping ["1"="Charging","2"="Not Charging","4"="Charging","5"="Go Charging"]
water-mode Number Water Mode Value mapping ["1"="Low","2"="Medium","4"="High"]
Fault Number Robot Cleaner-Device Fault Value mapping ["0"="No faults"]
Status Number Robot Cleaner-Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
BrushLeftTime Number:Time Main Cleaning Brush-Brush Left Time
BrushLifeLevel Number:Dimensionless Main Cleaning Brush-Brush Life Level
FilterLifeLevel Number:Dimensionless Filter - Filter Life Level
FilterLeftTime Number:Time Filter-Filter Left Time
BrushLeftTime1 Number:Time Side Cleaning Brush-Brush Left Time
BrushLifeLevel1 Number:Dimensionless Side Cleaning Brush-Brush Life Level
WorkMode Number clean-workmode
Area String clean-area
Timer String clean-timer
Mode Number clean-mode Value mapping ["0"="quiet","1"="standard","2"="medium","3"="strong"]
TotalCleanTime Number:Time Clean - Total Clean Time
TotalCleanTimes Number Clean - Total Clean Times
TotalCleanArea Number:Area Clean - Total Clean Area
CleanLogStartTime Number Clean - Clean Log Start Time
ButtonLed Number Clean - Button Led
TaskDone Number Clean - Task Done Value mapping ["0"="in progress","1"="done"]
LifeSieve String Consumable - Life Sieve
LifeBrushSide String Consumable - Life Brush Side
LifeBrushMain String Consumable - Life Brush Main
Enable Switch Annoy - Enable
StartTime String Annoy - Start Time
StopTime String Annoy - Stop Time
MapView String Map - Map View
Volume Number Audio - Volume
VoicePackets String Audio - Voice Packets
TimeZone String Time - Time Zone

# Dreame Robot Vacuum-Mop F9 (dreame.vacuum.p2008) Channels

Channel Type Description Comment
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Faults"]
battery-level Number Battery - Battery Level
charging-state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush-left-time Number:Time Main Cleaning Brush - Brush Left Time
brush-life-level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush-left-time1 Number:Time Side Cleaning Brush - Brush Left Time
brush-life-level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter-life-level Number:Dimensionless Filter - Filter Life Level
filter-left-time Number:Time Filter - Filter Left Time
work-mode Number Vacuum Extend - Work Mode
cleaning-time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning-mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task-status Number Vacuum Extend - Task Status Value mapping ["0"="Status 0","1"="Status 1"]
break-point-restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet-press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
enable Switch Do Not Disturb - Enable
start-time String Do Not Disturb - Start Time
end-time String Do Not Disturb - End Time
volume Number Audio - Volume
voice-packet-id String Audio - Voice Packet Id
voice-change-state String Audio - Voice Change State
time-zone String Time - Time Zone
timer-clean String Time - Timer Clean
first-clean-time Number Clean Logs - First Clean Time
total-clean-time Number:Time Clean Logs - Total Clean Time
total-clean-times Number Clean Logs - Total Clean Times
total-clean-area Number Clean Logs - Total Clean Area
save-map-status Number Vslam Extend - Save Map Status Value mapping ["0"="Off","1"="On","-1"="Not Enabled"]

# Dreame Robot Vacuum D9 (dreame.vacuum.p2009) Channels

Channel Type Description Comment
vacuumaction String Vacuum Action Value mapping ["sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock","findme"="Find me","testsound"="Test Sound"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery-level Number:Dimensionless Battery - Battery Level
charging-state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumable String Consumables Reset Value mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush","sidebrush-cleaner-reset-brush-life"="Reset Side Brush","filter-reset-filter-life"="Reset Filter"]
brush-left-time Number:Time Main Cleaning Brush - Brush Left Time
brush-life-level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush-left-time1 Number:Time Side Cleaning Brush - Brush Left Time
brush-life-level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter-life-level Number:Dimensionless Filter - Filter Life Level
filter-left-time Number:Time Filter - Filter Left Time
work-mode Number Vacuum Extend - Work Mode
cleaning-time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning-mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task-status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break-point-restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet-press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
serial-number1 String Vacuum Extend - Serial Number
clean-rags-tip Number:Time Vacuum Extend - Clean Rags Tip
keep-sweeper-time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
enable Switch Do Not Disturb - Enable
start-time String Do Not Disturb - Start Time
end-time String Do Not Disturb - End Time
volume Number:Dimensionless Audio - Volume
voice-packet-id String Audio - Voice Packet Id
voice-change-state String Audio - Voice Change State
time-zone String Time - Time Zone
timer-clean String Time - Timer Clean
first-clean-time Number Clean Logs - First Clean Time
total-clean-time Number:Time Clean Logs - Total Clean Time
total-clean-times Number Clean Logs - Total Clean Times
total-clean-area Number Clean Logs - Total Clean Area

# Dreame Bot W10 (dreame.vacuum.p2027) Channels

Channel Type Description Comment
actions String Actions Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","vacuum-start-room-sweep"="Vacuum Start Room Sweep","battery-start-charge"="Battery Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping","8"="Drying","9"="Washing","10"="Go Washing","11"="Building","12"="Sweeping and Mopping","13"="Charging Completed"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
mode Number Robot Cleaner - Mode Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level Number:Dimensionless Battery - Battery Level
charging_state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time Number:Time Main Cleaning Brush - Brush Left Time
brush_life_level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush_left_time1 Number:Time Side Cleaning Brush - Brush Left Time
brush_life_level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_left_time Number:Time Filter - Filter Left Time
work_mode Number Vacuum Extend - Work Mode
cleaning_time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning_mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task_status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
clean_extend_data String Vacuum Extend - Clean Extend Data
break_point_restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet_press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
remote_state String Vacuum Extend - Remote State
clean_rags_tip Number:Time Vacuum Extend - Clean Rags Tip
keep_sweeper_time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
nation_matched String Vacuum Extend - Nation Matched
relocation_status Number Vacuum Extend - Relocation Status
mop_status Number Vacuum Extend - Mop Status
child_lock Number Vacuum Extend - Child Lock Value mapping ["0"="Close","1"="Open"]
clean_cancel Number Vacuum Extend - Clean Cancel
enable Switch Do Not Disturb - Enable
start_time String Do Not Disturb - Start Time
end_time String Do Not Disturb - End Time
frame_info String Map - Frame Info
map_extend_data String Map - Map Extend Data
mult_map_state Number Map - Mult Map State Value mapping ["0"="Close","1"="Open"]
mult_map_info String Map - Mult Map Info
volume Number:Dimensionless Audio - Volume
voice_packet_id String Audio - Voice Packet Id
voice_change_state String Audio - Voice Change State
set_voice String Audio - Set Voice
time_zone String Time - Time Zone
timer_clean String Time - Timer Clean
first_clean_time Number Clean Logs - First Clean Time
total_clean_time Number:Time Clean Logs - Total Clean Time
total_clean_times Number Clean Logs - Total Clean Times
total_clean_area Number Clean Logs - Total Clean Area

# Dreame Bot Z10 Pro (dreame.vacuum.p2028) Channels

Channel Type Description Comment
actions String Actions Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","battery-start-charge"="Battery Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer","collect-dust-start-collect"="Collect Dust Start Collect"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery_level Number:Dimensionless Battery - Battery Level
charging_state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time Number:Time Main Cleaning Brush - Brush Left Time
brush_life_level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush_left_time1 Number:Time Side Cleaning Brush - Brush Left Time
brush_life_level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_left_time Number:Time Filter - Filter Left Time
work_mode Number Vacuum Extend - Work Mode
cleaning_time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning_mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task_status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
clean_extend_data String Vacuum Extend - Clean Extend Data
break_point_restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet_press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
remote_state String Vacuum Extend - Remote State
clean_rags_tip Number:Time Vacuum Extend - Clean Rags Tip
keep_sweeper_time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
nation_matched String Vacuum Extend - Nation Matched
relocation_status Number Vacuum Extend - Relocation Status
enable Switch Do Not Disturb - Enable
start_time String Do Not Disturb - Start Time
end_time String Do Not Disturb - End Time
frame_info String Map - Frame Info
map_extend_data String Map - Map Extend Data
mult_map_state Number Map - Mult Map State Value mapping ["0"="Close","1"="Open"]
mult_map_info String Map - Mult Map Info
volume Number:Dimensionless Audio - Volume
voice_packet_id String Audio - Voice Packet Id
voice_change_state String Audio - Voice Change State
set_voice String Audio - Set Voice
time_zone String Time - Time Zone
timer_clean String Time - Timer Clean
first_clean_time Number Clean Logs - First Clean Time
total_clean_time Number:Time Clean Logs - Total Clean Time
total_clean_times Number Clean Logs - Total Clean Times
total_clean_area Number Clean Logs - Total Clean Area
auto_collect Number Collect Dust - Auto Collect Value mapping ["0"="Close-auto-collect","1"="Open-auto-collect"]
clean_times Number Collect Dust - Clean Times
dust_enable Number Collect Dust - Dust Enable Value mapping ["0"="Disable","1"="Enable"]

# Trouver Robot LDS Vacuum-Mop Finder (dreame.vacuum.p2036) Channels

Channel Type Description Comment
vacuumaction String Vacuum Action Value mapping ["sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock","findme"="Find me","testsound"="Test Sound"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery-level Number:Dimensionless Battery - Battery Level
charging-state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumable String Consumables Reset Value mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush","sidebrush-cleaner-reset-brush-life"="Reset Side Brush","filter-reset-filter-life"="Reset Filter"]
brush-left-time Number:Time Main Cleaning Brush - Brush Left Time
brush-life-level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush-left-time1 Number:Time Side Cleaning Brush - Brush Left Time
brush-life-level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter-life-level Number:Dimensionless Filter - Filter Life Level
filter-left-time Number:Time Filter - Filter Left Time
work-mode Number Vacuum Extend - Work Mode
cleaning-time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning-mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task-status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break-point-restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet-press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
serial-number1 String Vacuum Extend - Serial Number
clean-rags-tip Number:Time Vacuum Extend - Clean Rags Tip
keep-sweeper-time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
enable Switch Do Not Disturb - Enable
start-time String Do Not Disturb - Start Time
end-time String Do Not Disturb - End Time
volume Number:Dimensionless Audio - Volume
voice-packet-id String Audio - Voice Packet Id
voice-change-state String Audio - Voice Change State
time-zone String Time - Time Zone
timer-clean String Time - Timer Clean
first-clean-time Number Clean Logs - First Clean Time
total-clean-time Number:Time Clean Logs - Total Clean Time
total-clean-times Number Clean Logs - Total Clean Times
total-clean-area Number Clean Logs - Total Clean Area

# Mi Robot Vacuum-Mop 2 Pro+ (dreame.vacuum.p2041o) Channels

Channel Type Description Comment
actions String Actions Value mapping ["vacuum-start-sweep"="Start Sweep","vacuum-stop-sweeping"="Stop Sweeping","battery-start-charge"="Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault Number Robot Cleaner - Device Fault
mode Number Robot Cleaner - Mode Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level Number:Dimensionless Battery - Battery Level
charging_state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time Number:Time Main Cleaning Brush - Brush Left Time
brush_life_level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush_left_time1 Number:Time Side Cleaning Brush - Brush Left Time
brush_life_level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_left_time Number:Time Filter - Filter Left Time
work_mode Number Vacuum Extend - Work Mode
cleaning_time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning_mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task_status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break_point_restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet_press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
serial_number String Vacuum Extend - Serial Number
keep_sweeper_time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
enable Switch Do Not Disturb - Enable
start_time String Do Not Disturb - Start Time
end_time String Do Not Disturb - End Time
volume Number:Dimensionless Audio - Volume
voice_packet_id String Audio - Voice Packet Id
voice_change_state String Audio - Voice Change State
time_zone String Time - Time Zone
timer_clean String Time - Timer Clean
first_clean_time Number Clean Logs - First Clean Time
total_clean_time Number:Time Clean Logs - Total Clean Time
total_clean_times Number Clean Logs - Total Clean Times
total_clean_area Number Clean Logs - Total Clean Area
save_map_status Number Vslam Extend - Save Map Status Value mapping ["0"="Off","1"="On"]

# MOVA Z500 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2156o) Channels

Channel Type Description Comment
actions String Actions Value mapping ["vacuum-start-sweep"="Start Sweep","vacuum-stop-sweeping"="Stop Sweeping","battery-start-charge"="Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault Number Robot Cleaner - Device Fault
mode Number Robot Cleaner - Mode Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level Number:Dimensionless Battery - Battery Level
charging_state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time Number:Time Main Cleaning Brush - Brush Left Time
brush_life_level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush_left_time1 Number:Time Side Cleaning Brush - Brush Left Time
brush_life_level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_left_time Number:Time Filter - Filter Left Time
work_mode Number Vacuum Extend - Work Mode
cleaning_time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning_mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task_status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break_point_restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet_press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
serial_number String Vacuum Extend - Serial Number
keep_sweeper_time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
enable Switch Do Not Disturb - Enable
start_time String Do Not Disturb - Start Time
end_time String Do Not Disturb - End Time
volume Number:Dimensionless Audio - Volume
voice_packet_id String Audio - Voice Packet Id
voice_change_state String Audio - Voice Change State
time_zone String Time - Time Zone
timer_clean String Time - Timer Clean
first_clean_time Number Clean Logs - First Clean Time
total_clean_time Number:Time Clean Logs - Total Clean Time
total_clean_times Number Clean Logs - Total Clean Times
total_clean_area Number Clean Logs - Total Clean Area
save_map_status Number Vslam Extend - Save Map Status Value mapping ["0"="Off","1"="On"]

# MOVA L600 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2157) Channels

Channel Type Description Comment
vacuumaction String Vacuum Action Value mapping ["sweep"="Sweep","stopsweep"="Stop Sweep","dock"="Goto Dock","findme"="Find me","testsound"="Test Sound"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
battery-level Number:Dimensionless Battery - Battery Level
charging-state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
resetConsumable String Consumables Reset Value mapping ["mainbrush-cleaner-reset-brush-life"="Reset Main Brush","sidebrush-cleaner-reset-brush-life"="Reset Side Brush","filter-reset-filter-life"="Reset Filter"]
brush-left-time Number:Time Main Cleaning Brush - Brush Left Time
brush-life-level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush-left-time1 Number:Time Side Cleaning Brush - Brush Left Time
brush-life-level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter-life-level Number:Dimensionless Filter - Filter Life Level
filter-left-time Number:Time Filter - Filter Left Time
work-mode Number Vacuum Extend - Work Mode
cleaning-time Number:Time Vacuum Extend - Cleaning Time
cleaning-area Number:Area Vacuum Extend - Cleaning Area
cleaning-mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop-mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox-status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task-status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
break-point-restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet-press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
serial-number1 String Vacuum Extend - Serial Number
clean-rags-tip Number:Time Vacuum Extend - Clean Rags Tip
keep-sweeper-time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
enable Switch Do Not Disturb - Enable
start-time String Do Not Disturb - Start Time
end-time String Do Not Disturb - End Time
volume Number:Dimensionless Audio - Volume
voice-packet-id String Audio - Voice Packet Id
voice-change-state String Audio - Voice Change State
time-zone String Time - Time Zone
timer-clean String Time - Timer Clean
first-clean-time Number Clean Logs - First Clean Time
total-clean-time Number:Time Clean Logs - Total Clean Time
total-clean-times Number Clean Logs - Total Clean Times
total-clean-area Number Clean Logs - Total Clean Area

# Dreame Bot D9 Max (dreame.vacuum.p2259) Channels

Channel Type Description Comment
actions String Actions Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","vacuum-start-room-sweep"="Vacuum Start Room Sweep","battery-start-charge"="Battery Start Charge","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","filter-reset-filter-life"="Filter Reset Filter Life","vacuum-extend-start-clean"="Vacuum Extend Start Clean","vacuum-extend-stop-clean"="Vacuum Extend Stop Clean","map-map-req"="Map Map Req","map-update-map"="Map Update Map","audio-position"="Audio Position","audio-play-sound"="Audio Play Sound","time-delete-timer"="Time Delete Timer"]
status Number Robot Cleaner - Status Value mapping ["1"="Sweeping","2"="Idle","3"="Paused","4"="Error","5"="Go Charging","6"="Charging","7"="Mopping"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Error","1"="Drop","2"="Cliff","3"="Bumper","4"="Gesture","5"="Bumper Repeat","6"="Drop Repeat","7"="Optical Flow","8"="No Box","9"="No Tankbox","10"="Waterbox Empty","11"="Box full","12"="Brush","13"="Side Brush","14"="Fan","15"="Left Wheel motor","16"="Right Wheel motor","17"="Turn suffocate","18"="Forward suffocate","19"="Charger get","20"="Battery low","21"="Charge fault","22"="Battery percentage","23"="Heart","24"="Camera occlusion","25"="Camera fault","26"="Event battery","27"="Forward looking","28"="Gyroscope"]
mode Number Robot Cleaner - Mode Value mapping ["0"="Silent","1"="Basic","2"="Strong","3"="Full Speed"]
battery_level Number:Dimensionless Battery - Battery Level
charging_state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not Charging","5"="Go Charging"]
brush_left_time Number:Time Main Cleaning Brush - Brush Left Time
brush_life_level Number:Dimensionless Main Cleaning Brush - Brush Life Level
brush_left_time1 Number:Time Side Cleaning Brush - Brush Left Time
brush_life_level1 Number:Dimensionless Side Cleaning Brush - Brush Life Level
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_left_time Number:Time Filter - Filter Left Time
work_mode Number Vacuum Extend - Work Mode
cleaning_time Number:Time Vacuum Extend - Cleaning Time
cleaning_area Number:Area Vacuum Extend - Cleaning Area
cleaning_mode Number Vacuum Extend - Cleaning Mode Value mapping ["0"="mode 0","1"="mode 1","2"="mode 2","3"="mode 3"]
mop_mode Number Vacuum Extend - Mop Mode Value mapping ["1"="low water","2"="medium water","3"="high water"]
waterbox_status Number Vacuum Extend - Waterbox Status Value mapping ["0"="Status 0","1"="Status 1"]
task_status Number Vacuum Extend - Task Status Value mapping ["0"="Notask","1"="AutoClean","2"="CustomClean","3"="SelectAreanClean","4"="SpotArea"]
clean_extend_data String Vacuum Extend - Clean Extend Data
break_point_restart Number Vacuum Extend - Break Point Restart Value mapping ["0"="Off","1"="On"]
carpet_press Number Vacuum Extend - Carpet Press Value mapping ["0"="Off","1"="On"]
remote_state String Vacuum Extend - Remote State
clean_rags_tip Number:Time Vacuum Extend - Clean Rags Tip
keep_sweeper_time Number:Time Vacuum Extend - Keep Sweeper Time
faults String Vacuum Extend - Faults
enable Switch Do Not Disturb - Enable
start_time String Do Not Disturb - Start Time
end_time String Do Not Disturb - End Time
frame_info String Map - Frame Info
map_extend_data String Map - Map Extend Data
mult_map_state Number Map - Mult Map State Value mapping ["0"="Close","1"="Open"]
mult_map_info String Map - Mult Map Info
volume Number:Dimensionless Audio - Volume
voice_packet_id String Audio - Voice Packet Id
voice_change_state String Audio - Voice Change State
set_voice String Audio - Set Voice
time_zone String Time - Time Zone
timer_clean String Time - Timer Clean
first_clean_time Number Clean Logs - First Clean Time
total_clean_time Number:Time Clean Logs - Total Clean Time
total_clean_times Number Clean Logs - Total Clean Times
total_clean_area Number Clean Logs - Total Clean Area

# HUIZUO ARIES For Bedroom (huayi.light.ari013) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO ARIES For Living Room (huayi.light.aries) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO Fan Light (huayi.light.fanwy) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature
on1 Switch Fan - Power
fan-level Number:Dimensionless Fan - Fan Level
motor-reverse Switch Fan - Motor Reverse
mode Number Fan - Mode Value mapping ["1"="Normal Wind","2"="Natural Wind"]

# HUIZUO Fan Light(2020) (huayi.light.fanwy2) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature
on1 Switch Fan - Power
fan-level Number:Dimensionless Fan - Fan Level
mode Number Fan - Mode Value mapping ["0"="Basic","1"="Natural Wind"]
time-off Number:Time Presets - Time Off
pre-colortemp Number:Temperature Presets - Pre Colortemp
pre-brightness Dimmer Presets - Pre Brightness
pre-speed Number:Dimensionless Presets - Pre Speed
reversal Number Presets - Reversal Value mapping ["0"="Postitive","1"="Reverse"]
pre-custom Number Presets - Pre Custom Value mapping ["0"="Switch Off","1"="Open"]
flabellum Switch Presets - Flabellum

# HUIZUO PEGASUS For Living Room (huayi.light.peg091) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO PEGASUS For Bedroom (huayi.light.peg093) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO PISCES For Bedroom (huayi.light.pis123) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO PISCES For Living Room (huayi.light.pisces) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO TAURUS For Bedroom (huayi.light.tau023) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO TAURUS For Living Room (huayi.light.taurus) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO VIRGO For Bedroom (huayi.light.vir063) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO VIRGO For Living Room (huayi.light.virgo) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO Ceiling Light (huayi.light.wy) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO LIANGCHEN(BLE Mesh) (huayi.light.wy200) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO SAG Downlight (BLE Mesh) (huayi.light.wy201) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO Bulb (BLE Mesh) (huayi.light.wy202) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO YONG Downlight (BLE Mesh) (huayi.light.wy203) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# huayi.light.wy204 (huayi.light.wy204) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# HUIZUO Heating Lamp (huayi.light.wyheat) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature
on1 Switch Heater - Power
fault Number Heater - Device Fault Value mapping ["0"="No Faults"]
heat-level Number Heater - Heat Level
screenshow Switch Other - Screenshow

# HUIZUO ZIWEI Ceiling Lamp (huayi.light.zw131) Channels

Channel Type Description Comment
on Switch Light - Power
brightness Dimmer Light - Brightness
color-temperature Number:Temperature Light - Color Temperature

# IKEA E27 white spectrum opal (ikea.light.led1545g12) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# IKEA E27 white spectrum clear (ikea.light.led1546g12) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# IKEA E14 white spectrum (ikea.light.led1536g5) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# IKEA GU10 white spectrum (ikea.light.led1537r6) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# IKEA E27 warm white (ikea.light.led1623g12) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# IKEA GU10 warm white (ikea.light.led1650r5) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# IKEA E14 warm white (ikea.light.led1649c5) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# Xiaomiyoupin Curtain Controller (Wi-Fi) (lumi.curtain.hagl05) Channels

Channel Type Description Comment
fault Number Curtain - Device Fault Value mapping ["0"="No faults"]
motor_control Number Curtain - Motor Control Value mapping ["0"="Pause","1"="Open","2"="Close","3"="auto"]
current-position Number:Dimensionless Curtain - Current Position
status Number Curtain - Status Value mapping ["0"="Stopped","1"="Opening","2"="Closing"]
target-position Number:Dimensionless Curtain - Target Position
manual-enabled Number curtain_cfg - Manual Enabled Value mapping ["0"="Disable","1"="Enable"]
polarity Number Curtain_cfg - Polarity Value mapping ["0"="Positive","1"="Reverse"]
pos-limit Number curtain_cfg - Position Limit Value mapping ["0"="Unlimit","1"="Limit"]
en_night_tip_light Number Curtain_cfg - En_night_tip_light Value mapping ["0"="Disable","1"="Enable"]
run-time Number Curtain_cfg - Run-time
adjust_value Number Motor_controller - Adjust_value

# Mi Air Purifier virtual (lumi.gateway.mgl03) Channels

Channel Type Description Comment
telnetEnable Switch Enable Telnet Access the device with telnet to further unlock developer mode. See forum
doorbellVol Number Doorbell Volume
gatewayVol Number Gateway Volume
alarmingVol Number Alarming Volume
doorbellPush String Doorbell Push

# Mi smart Home Gateway Hub (lumi.gateway.mieu01) Channels

Channel Type Description Comment
guard Switch Guard
corridor Switch Automatic Night Light
nightlight Color Night Light
rgb Color Colored Light
doorbell_volume Number Doorbell Volume
alarming_volume Number Alarming Volume
gateway_volume Number Gateway Volume
arming_time Number:Time Arming Time
corridor_on_time Number:Time Corridor on time
language String Voice prompt Language
zigbee_channel String Zigbee Channel
lumi_bind String Lumi_bind info
doorbell_push String Doorbell Push

# Mi smart Home Gateway Hub v1 (lumi.gateway.v1) Channels

Channel Type Description Comment
telnetEnable Switch Enable Telnet Access the device with telnet to further unlock developer mode. See forum
doorbellVol Number Doorbell Volume
gatewayVol Number Gateway Volume
alarmingVol Number Alarming Volume
doorbellPush String Doorbell Push

# Mi smart Home GatewayHub v2 (lumi.gateway.v2) Channels

Channel Type Description Comment
telnetEnable Switch Enable Telnet Access the device with telnet to further unlock developer mode. See forum
doorbellVol Number Doorbell Volume
gatewayVol Number Gateway Volume
alarmingVol Number Alarming Volume
doorbellPush String Doorbell Push

# Mi smart Home Gateway Hub v3 (lumi.gateway.v3) Channels

Channel Type Description Comment
telnetEnable Switch Enable Telnet Access the device with telnet to further unlock developer mode. See forum
doorbellVol Number Doorbell Volume
gatewayVol Number Gateway Volume
alarmingVol Number Alarming Volume
doorbellPush String Doorbell Push

# Aqara LED Light Bulb (Tunable White) (lumi.light.aqcn02) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
colour_temperature Number Color Temperature

# Door lock (lumi.lock.v1) Channels

Channel Type Description Comment
status String Status
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data

# Aqara Door Lock (lumi.lock.aq1) Channels

Channel Type Description Comment
status String Status
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data

# Aqara Door Lock S2 (lumi.lock.acn02) Channels

Channel Type Description Comment
status String Status
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data

# Aqara Door lock S2 Pro (lumi.lock.acn03) Channels

Channel Type Description Comment
status String Status
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data

# Mi Smart Plug (Zigbee) (lumi.plug.mmeu01) Channels

Channel Type Description Comment
power Switch Power
load_power Number Load Power
en_night_tip_light Switch Led Light
poweroff_memory Switch Poweroff Memory
max_power Number Max Power
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data.

# Mi Window and Door Sensor (lumi.sensor_magnet.v2) Channels

Channel Type Description Comment
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data.

# Mi Motion Sensor (lumi.sensor_motion.aq2) Channels

Channel Type Description Comment
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data

# Mi Motion Sensor (lumi.sensor_motion.v2) Channels

Channel Type Description Comment
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data

# Mi Temperature and Humidity Sensor (lumi.sensor_ht.v1) Channels

Channel Type Description Comment
temperature Number:Temperature Temperature
humidity Number:Dimensionless Humidity

# Water Leak Sensor (lumi.sensor_wleak.aq1) Channels

Channel Type Description Comment
leak Switch Leaking
log String Device Log This channel uses cloud to get data. See widget market place for suitable widget to display the data

# Aqara Temperature and Humidity Sensor (lumi.weather.v1) Channels

Channel Type Description Comment
temperature Number:Temperature Temperature
humidity Number:Dimensionless Humidity
pressure Number:Pressure pressure

# Mi Robot Vacuum-Mop Essential (mijia.vacuum.v2) Channels

Channel Type Description Comment
vacuumaction String Vacuum Action This channel accepts start, stop, findme and dock.
status Number Robot Cleaner - Status Value mapping ["1"="Idle","2"="Sweeping","3"="Paused","4"="Error","5"="Charging","6"="Go Charging"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Faults","1"="Left-wheel-error","2"="Right-wheel-error","3"="Cliff-error","4"="Low-battery-error","5"="Bump-error","6"="Main-brush-error","7"="Side-brush-error","8"="Fan-motor-error","9"="Dustbin-error","10"="Charging-error","11"="No-wate-error","12"="Pick-up-error"]
mode Number Robot Cleaner - Mode Value mapping ["1"="Auto-clean","2"="Spot-clean","3"="Wallflow-clean"]
target-water-level Number Robot Cleaner - Target Water Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
fan-level Number Robot Cleaner - Fan Level Value mapping ["0"="Silence","1"="Stanrd","2"="Middle","3"="Enchance"]
battery-level Number:Dimensionless Battery - Battery Level
charging-state Number Battery - Charging State Value mapping ["0"="Not-charging","1"="Charging","2"="Charging-competely"]
alarm Switch Alarm - Alarm
volume Number:Dimensionless Alarm - Volume
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter-left-time Number:Time Filter - Filter Left Time
brush-life-level Number:Dimensionless Brush Cleaner - Brush Life Level
brush-left-time Number:Time Brush Cleaner - Brush Left Time
brush-life-level1 Number:Dimensionless Brush Cleaner - Brush Life Level
brush-left-time1 Number:Time Brush Cleaner - Brush Left Time
direction_key Number Remote Control - Direction Key Value mapping ["0"="direction 0","1"="direction 1","2"="direction 2","3"="direction 3","4"="direction 4"]
clean-area Number:Area Clean Record - Clean Area
clean_time Number Clean Record - Clean Time
total-clean-area Number:Area Clean Record - Total Clean Area
total-clean-time Number Clean Record - Total Clean Time
total-clean-count Number Clean Record - Total Clean Count
language Number Language - Language Value mapping ["0"="English","1"="简体中文","2"="Español","3"="Русский","4"="Italiano","5"="Français","6"="Deutsch","7"="한국어","8"="Polski"]
not-disturb-switch Switch Language - Not Disturb Switch
mop-status Number Other Status - Mop Status Value mapping ["0"="Mop Uninstall","1"="Mop Install"]

# Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s1) Channels

Channel Type Description Comment
fault Number Pet Drinking Fountain - Device Fault Value mapping ["0"="No faults"]
on Switch Power
mode Number Mode Value mapping ["1"="Common","2"="Smart "]
filter-left-time Number:Time Filter - Filter Left Time
on1 Switch Indicator Light - Switch
cotton-left-time Number:Time Filter Cotton - Cotton Left Time
remain-clean-time Number:Time Remain Clean Time - Remain Clean Time
no-water-flag Switch No Water Flag - No Water Flag
resetConsumable String Consumables Reset Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time Number:Time No Water Flag - No Water Time

# Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s2) Channels

Channel Type Description Comment
fault Number Pet Drinking Fountain - Device Fault Value mapping ["0"="No faults"]
on Switch Power
mode Number Mode Value mapping ["1"="Common","2"="Smart "]
filter-left-time Number:Time Filter - Filter Left Time
on1 Switch Indicator Light - Switch
cotton-left-time Number:Time Filter Cotton - Cotton Left Time
remain-clean-time Number:Time Remain Clean Time - Remain Clean Time
no-water-flag Switch No Water Flag - No Water Flag
resetConsumable String Consumables Reset Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time Number:Time No Water Flag - No Water Time
pump-block-flag Switch No Water Flag - Pump Block Flag

# Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s3) Channels

Channel Type Description Comment
fault Number Pet Drinking Fountain - Device Fault Value mapping ["0"="No faults"]
on Switch Power
mode Number Mode Value mapping ["1"="Common","2"="Smart "]
filter-left-time Number:Time Filter - Filter Left Time
on1 Switch Indicator Light - Switch
cotton-left-time Number:Time Filter Cotton - Cotton Left Time
remain-clean-time Number:Time Remain Clean Time - Remain Clean Time
no-water-flag Switch No Water Flag - No Water Flag
resetConsumable String Consumables Reset Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time Number:Time No Water Flag - No Water Time
pump-block-flag Switch No Water Flag - Pump Block Flag

# XIAOWAN Smart Pet Water Dispenser (mmgg.pet_waterer.s4) Channels

Channel Type Description Comment
fault Number Pet Drinking Fountain - Device Fault Value mapping ["0"="No faults"]
on Switch Power
mode Number Mode Value mapping ["1"="Common","2"="Smart "]
filter-left-time Number:Time Filter - Filter Left Time
on1 Switch Indicator Light - Switch
cotton-left-time Number:Time Filter Cotton - Cotton Left Time
remain-clean-time Number:Time Remain Clean Time - Remain Clean Time
no-water-flag Switch No Water Flag - No Water Flag
resetConsumable String Consumables Reset Value mapping ["remain-clean-time-reset-clean-time"="Reset Clean Time","filter-cotton-reset-cotton-life"="Reset Cotton Time","filter-reset-filter-life"="Reset Filter Life"]
no-water-time Number:Time No Water Flag - No Water Time
pump-block-flag Switch No Water Flag - Pump Block Flag

# MR.BOND (mrbond.airer.m1pro) Channels

Channel Type Description Comment
dry Switch Dry
led Switch LED Status
motor Number Motor
drytime Number Dry Time
airer_location Number Airer Location
disinfect Switch disinfect
distime Number Disinfect Time

# MR.BOND (mrbond.airer.m1s) Channels

Channel Type Description Comment
dry Switch Dry
led Switch LED Status
motor Number Motor
drytime Number Dry Time
airer_location Number Airer Location
disinfect Switch disinfect
distime Number Disinfect Time

# MR.BOND (mrbond.airer.m1super) Channels

Channel Type Description Comment
dry Switch Dry
led Switch LED Status
motor Number Motor
drytime Number Dry Time
airer_location Number Airer Location
disinfect Switch disinfect
distime Number Disinfect Time

# WIDETECH WDH318EFW1 Internet Dehumidifier (nwt.derh.wdh318efw1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode
autohumidity Number:Dimensionless Auto humidity
fanspeed Number Fan Speed
buzzer Switch Buzzer
led Switch LED
childlock Switch Child Lock
humidity Number:Dimensionless Humidity
temperature Number:Temperature Temperature
tankfull Switch Tank Full
compressorstatus Switch Compressor Status
defroststatus Switch Defrost Status
fanst Number Fan St
alarm String Alarm

# Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceiling1) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
sw Switch Switch
bl Switch Night Light
ms Switch MiBand Notifications
ac Switch Auto Ambiance
delayoff Switch Delay Off
mb Switch MiBand

# Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceiling2) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
sw Switch Switch
bl Switch Night Light
ms Switch MiBand Notifications
ac Switch Auto Ambiance
delayoff Switch Delay Off
mb Switch MiBand

# Philips ZhiRui E27 bulb (philips.light.bulb) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
switchscene Switch Switch Scene
delayoff Switch Delay Off

# Philips ZhiRui E14 Candle Lamp Frosted version (philips.light.candle) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
delayoff Switch Delay Off
toggle Switch Toggle

# Philips ZhiRui E14 Candle Lamp Crystal version (philips.light.candle2) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
delayoff Switch Delay Off
toggle Switch Toggle

# Mijia Philips Color Bulb (philips.light.cbulb) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
cid Color Color
switchscene Switch Switch Scene
switch_en Switch Switch Enabled
delayoff Switch Delay Off

# Philips Light (philips.light.cbulbs) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
cid Color Color
switchscene Switch Switch Scene
switch_en Switch Switch Enabled
delayoff Switch Delay Off

# Philips Connected Ceiling (philips.light.ceiling) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
switchscene Switch Switch Scene
toggle Switch Toggle

# Philips Light (philips.light.dcolor) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
cid Color Color
switchscene Switch Switch Scene
switch_en Switch Switch Enabled
delayoff Switch Delay Off

# ZhiRui Dimmable Downlight (philips.light.dlight) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Philips ZhiRui Downlight (philips.light.downlight) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
switchscene Switch Switch Scene
delayoff Switch Delay Off

# Philips Wi-Fi bulb E27 White (philips.light.hbulb) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
switchscene Switch Switch Scene
delayoff Switch Delay Off

# Philips ZhiYi Ceiling Lamp FL 40W (philips.light.lnblight1) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
sw Switch Switch
bl Switch Night Light
ms Switch MiBand Notifications
ac Switch Auto Ambiance
delayoff Switch Delay Off
mb Switch MiBand

# Philips ZhiYi Ceiling Lamp FL 28W (philips.light.lnblight2) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
sw Switch Switch
bl Switch Night Light
ms Switch MiBand Notifications
ac Switch Auto Ambiance
delayoff Switch Delay Off
mb Switch MiBand

# Philips ZhiYi Ceiling Lamp FL 80W (philips.light.lnlrlight) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
sw Switch Switch
bl Switch Night Light
ms Switch MiBand Notifications
ac Switch Auto Ambiance
delayoff Switch Delay Off
mb Switch MiBand

# Philips Zhirui Ceiling Lamp Living room 80W (philips.light.lrceiling) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
sw Switch Switch
bl Switch Night Light
ms Switch MiBand Notifications
ac Switch Auto Ambiance
delayoff Switch Delay Off
mb Switch MiBand

# Zhirui Ceiling Lamp Nordic 80W (philips.light.mceil) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Nordic 40W (philips.light.mceilm) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Nordic 28W (philips.light.mceils) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Philips Smart Lamp (philips.light.mono1) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
scene Number Scene

# Philips ZhiRui Bedside Lamp (philips.light.moonlight) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
gonight Switch Go Night
delayoff Switch Delay Off
toggle Switch Toggle

# Zhirui Ceiling Lamp Black 80W (philips.light.obceil) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Black 40W (philips.light.obceim) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Black 28W (philips.light.obceis) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Mijia Philips Study Desk Lamp (philips.light.rwread) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
scene Number Scene
flm Number Follow Me
dv Number DV

# Zhirui Ceiling Lamp Starry 80W (philips.light.sceil) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Starry 40W (philips.light.sceilm) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Starry 28W (philips.light.sceils) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Philips EyeCare Connected Desk Lamp gen2. (philips.light.sread1) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
ambientPower Switch Ambient Power
ambientBrightness Number Ambient Brightness
illumination Number Ambient Illumination
eyecare Switch Eyecare
bl Switch Night Light

# Mijia Philips Desk Lamp 2S (philips.light.sread2) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
ambientPower Switch Ambient Power
ambientBrightness Number Ambient Brightness
illumination Number Ambient Illumination
eyecare Switch Eyecare
bl Switch Night Light

# Philips Connected Lights (philips.light.virtual) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
switchscene Switch Switch Scene
delayoff Switch Delay Off

# Zhirui Ceiling Lamp Gorgeous 80W (philips.light.xzceil) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Gorgeous 40W (philips.light.xzceim) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Zhirui Ceiling Lamp Gorgeous 28W (philips.light.xzceis) Channels

Channel Type Description Comment
on Switch Power
mode Number Mode
brightness Dimmer Brightness
cct Number Color Temperature
dv Number Delayed Turn-off
WallSceneEn Switch Wall Scene Enable
WallScene String Wall Scene
autoCct String Auto CCT
dimmingPeriod Number Dimming Period
MibandStatus String Mi Band Status
actions String Actions Value mapping ["light-brightness-down"="Light Brightness Down","light-brightness-up"="Light Brightness Up","light-toggle"="Light Toggle"]

# Philips ZhiYi Ceiling lamp (philips.light.zyceiling) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
switchscene Switch Switch Scene
toggle Switch Toggle

# Philips ZhiYi Desk Lamp (philips.light.zysread) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
switchscene Switch Switch Scene
delayoff Switch Delay Off

# Philips ZhiYi Strip (philips.light.zystrip) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
cct Dimmer Correlated Color Temperature
scene Number Scene
dv Number DV
switchscene Switch Switch Scene
delayoff Switch Delay Off

# CHINGMI Smart Power Strip v1 (qmi.powerstrip.v1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["normal"="Normal","green"="Green"]
powerUsage Number:Power Power Consumption
voltage Number:ElectricPotential Voltage
led Switch wifi LED
power_price Number Power Price
power_factor Number Power Factor
current Number:ElectricCurrent Current
elec_leakage Number:ElectricCurrent Electic Leakage
temperature Number:Temperature Temperature

# ROIDMI EVE vacuum (roidmi.vacuum.v60) Channels

Channel Type Description Comment
actions String Actions Value mapping ["vacuum-start-sweep"="Vacuum Start Sweep","vacuum-stop-sweeping"="Vacuum Stop Sweeping","vacuum-start-room-sweep"="Vacuum Start Room Sweep","battery-start-charge"="Battery Start Charge","filter-reset-filter-life"="Filter Reset Filter Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","brush-cleaner-reset-brush-life"="Brush Cleaner Reset Brush Life","custom-find-robot"="Custom Find Robot","custom-stop-find-charge"="Custom Stop Find Charge","custom-continue-sweep"="Custom Continue Sweep","custom-start-dust"="Custom Start Dust","custom-pause"="Custom Pause","custom-pause-find-charge"="Custom Pause Find Charge","custom-continue-find-charge"="Custom Continue Find Charge","custom-update-audio"="Custom Update Audio","custom-set-voice"="Custom Set Voice","map-request-path"="Map Request Path","map-change-area-name"="Map Change Area Name","map-set-auto-area"="Map Set Auto Area","map-local-map"="Map Local Map","map-area-custom"="Map Area Custom","map-area-order"="Map Area Order","sweep-start-sweep"="Sweep Start Sweep"]
status Number Robot Cleaner - Status Value mapping ["1"="Dormant","2"="Idle","3"="Paused","4"="Sweeping","5"="Go Charging","6"="Charging","7"="Error","8"="Rfctrl","9"="Fullcharge","10"="Shutdown","11"="Findchargerpause"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Faults","1"="Low Battery Find Charger","2"="Low Battery And Poweroff","3"="Wheel Trap","4"="Collision Error","5"="Tile Do Task","6"="Lidar Point Error","7"="Front Wall Error","8"="Psd Dirty","9"="Middle Brush Fatal","10"="Sid Brush","11"="Fan Speed Error","12"="Lidar Cover","13"="Garbage Box Full","14"="Garbage Box Out","15"="Garbage Box Full Out","16"="Physical Trapped","17"="Pick Up Do Task","18"="No Water Box Do Task","19"="Water Box Empty","20"="Clean Cannot Arrive","21"="Start Form Forbid","22"="Drop","23"="Kit Water Pump","24"="Find Charger Failed","25"="Low Power Clean"]
mode Number Robot Cleaner - Mode Value mapping ["1"="Silent","2"="Basic","3"="Strong","4"="Full Speed","0"="Sweep"]
sweep_type Number Robot Cleaner - Sweep Type Value mapping ["0"="Sweep","1"="Mop","2"="Mop And Sweep"]
on Number Robot Cleaner - Switch Status Value mapping ["1"="Open"]
battery_level Number:Dimensionless Battery - Battery Level
charging_state Number Battery - Charging State Value mapping ["1"="Charging","2"="Not charging","3"="Not chargeable"]
volume Number:Dimensionless Speaker - Volume
mute Switch Speaker - Mute
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_left_time Number:Time Filter - Filter Left Time
brush_left_time Number:Time Brush Cleaner - Brush Left Time
brush_life_level Number:Dimensionless Brush Cleaner - Brush Life Level
brush_left_time1 Number:Time Brush Cleaner - Brush Left Time
brush_life_level1 Number:Dimensionless Brush Cleaner - Brush Life Level
brush_left_time2 Number:Time Brush Cleaner - Brush Left Time
brush_life_level2 Number:Dimensionless Brush Cleaner - Brush Life Level
mop Switch Custom - Mop
work_station_freq Number Custom - Work Station Freq
timing String Custom - Timing
clean_area Number Custom - Clean Area
uid String Custom - Uid
auto_boost Switch Custom - Auto Boost
forbid_mode String Custom - Forbid Mode
water_level Number Custom - Water Level Value mapping ["1"="First","2"="Second","3"="Three","4"="Fourth","0"="Mop"]
total_clean_time Number:Time Custom - Total Clean Time
total_clean_areas Number Custom - Total Clean Areas
clean_counts Number Custom - Clean Counts
clean_time Number:Time Custom - Clean Time
double_clean Switch Custom - Double Clean
edge_sweep Switch Custom - Edge Sweep
led_switch Switch Custom - Led Switch
lidar_collision Switch Custom - Lidar Collision
station_key Switch Custom - Station Key
station_led Switch Custom - Station Led
current_audio String Custom - Current Audio
progress String Custom - Progress
station_type Number Custom - Station Type
voice_conf String Custom - Voice Conf
clean_path String Map - Clean Path
restricted_zone String Map - Restricted Zone
auto_area String Map - Auto Area
map_memory Switch Map - Map Memory
map_name String Map - Map Name
use_auto_area Switch Map - Use Auto Area
path_type Number Map - Path Type Value mapping ["0"="Normal","1"="Y-Mopping","2"="Repeat-Mopping"]
sweep_mode Number Sweep - Sweep Mode Value mapping ["1"="Total","2"="Area","3"="Curpoint","4"="Point","7"="Smart","8"="AmartArea","9"="DepthTotal","10"="AlongWall","0"="Idle"]

# PTX OneKey Switch (WIFI) (090615.switch.xswitch01) Channels

Channel Type Description Comment
switch1state Number Switch 1
switch1name String Switch Name 1

# PTX Twokey switch(wifi) (090615.switch.xswitch02) Channels

Channel Type Description Comment
switch1state Number Switch 1
switch2state Number Switch 2
switch1name String Switch Name 1
switch2name String Switch Name 2

# PTX ThreeKey Switch (WIFI) (090615.switch.xswitch03) Channels

Channel Type Description Comment
switch1state Number Switch 1
switch2state Number Switch 2
switch3state Number Switch 3
switch1name String Switch Name 1
switch2name String Switch Name 2
switch3name String Switch Name 3

# SCISHARE Smart Capsule Coffee Machine (scishare.coffee.s1102) Channels

Channel Type Description Comment
power Switch Power
Status String status
expresso Number Brew Expresso Value is the amount of coffee in ml. 2nd parameter in the json db is the water temperature
expresso Number Brew Americano Value is the amount of coffee in ml. parameters in json are cupAmount: [set by OH], coffee: 40,water: 80, temp: 90
boil Number Boil water Value is the amount of water (ml) to heat. 2nd parameter in the json db is the water temperature

# Xiaomi Scishare Smart Capsule Coffee Machine (scishare.coffee.s1301) Channels

Channel Type Description Comment
power Switch Power
Status String status
expresso Number Brew Expresso Value is the amount of coffee in ml. 2nd parameter in the json db is the water temperature
expresso Number Brew Americano Value is the amount of coffee in ml. parameters in json are cupAmount: [set by OH], coffee: 40,water: 80, temp: 90
boil Number Boil water Value is the amount of water (ml) to heat. 2nd parameter in the json db is the water temperature

# Viomi Cleaning Robot V-RVCLM21B (viomi.vacuum.v6) Channels

Channel Type Description Comment
vacuumaction Number Vacuum Action Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock"]
state Number State Value mapping ["0"="Idle Undocked","1"="Idle","2"="Paused","3"="Sweeping","4"="Go Charging","5"="Charging","6"="Sweeping and Mopping","7"="Mopping"]
mode Number Clean Mode Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
err_state Number Error Value mapping ["0"="Sleeping and not charging","500"="Radar timed out","501"="Wheels stuck","502"="Low battery","503"="Dust bin missing","508"="Uneven ground","509"="Cliff sensor erro","510"="Collision sensor error","511"="Could not return to dock","512"="Could not return to dock","513"="Could not navigate","514"="Vacuum stuck","515"="Charging erro","516"="Mop temperature error","521"="Water tank is not installed","522"="Mop is not installed","525"="Insufficient water in water tank","527"="Remove mop","528"="Dust bin missing","529"="Mop and water tank missing","530"="Mop and water tank missin","531"="Water tank is not installed","2101"="Unsufficient battery, continuing cleaning after recharge","2103"="Charging","2104"="Fully charged"]
battery_life Number Battery
box_type Number Box type Value mapping ["0"="No Bin","1"="Sweep","2"="Mop","3"="Sweep and Mop"]
mop_type Number mop_type
mop_route Number Mop Route Value mapping ["0"="S-Pattern","1"="Y-Pattern"]
s_time Number Clean time
s_area Number Clean Area
suction_grade Number suction_grade Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
water_grade Number water_grade Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_map Number remember_map
has_map Number has_map
is_mop Number is_mop Value mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop","3"="CleanZone","4"="CleanSpot"]
has_newmap Number has_newmap

# Mi Robot Vacuum-Mop P (viomi.vacuum.v7) Channels

Channel Type Description Comment
vacuumaction Number Vacuum Action Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock"]
state Number State Value mapping ["0"="Idle Undocked","1"="Idle","2"="Paused","3"="Sweeping","4"="Go Charging","5"="Charging","6"="Sweeping and Mopping","7"="Mopping"]
mode Number Clean Mode Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
err_state Number Error Value mapping ["0"="Sleeping and not charging","500"="Radar timed out","501"="Wheels stuck","502"="Low battery","503"="Dust bin missing","508"="Uneven ground","509"="Cliff sensor erro","510"="Collision sensor error","511"="Could not return to dock","512"="Could not return to dock","513"="Could not navigate","514"="Vacuum stuck","515"="Charging erro","516"="Mop temperature error","521"="Water tank is not installed","522"="Mop is not installed","525"="Insufficient water in water tank","527"="Remove mop","528"="Dust bin missing","529"="Mop and water tank missing","530"="Mop and water tank missin","531"="Water tank is not installed","2101"="Unsufficient battery, continuing cleaning after recharge","2103"="Charging","2104"="Fully charged"]
battery_life Number Battery
box_type Number Box type Value mapping ["0"="No Bin","1"="Sweep","2"="Mop","3"="Sweep and Mop"]
mop_type Number mop_type
mop_route Number Mop Route Value mapping ["0"="S-Pattern","1"="Y-Pattern"]
s_time Number Clean time
s_area Number Clean Area
suction_grade Number suction_grade Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
water_grade Number water_grade Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_map Number remember_map
has_map Number has_map
is_mop Number is_mop Value mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop","3"="CleanZone","4"="CleanSpot"]
has_newmap Number has_newmap

# Mi Robot Vacuum-Mop P (viomi.vacuum.v8) Channels

Channel Type Description Comment
vacuumaction Number Vacuum Action Value mapping ["1"="Start","0"="Stop","2"="Pause","3"="Dock"]
state Number State Value mapping ["0"="Idle Undocked","1"="Idle","2"="Paused","3"="Sweeping","4"="Go Charging","5"="Charging","6"="Sweeping and Mopping","7"="Mopping"]
mode Number Clean Mode Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
err_state Number Error Value mapping ["0"="Sleeping and not charging","500"="Radar timed out","501"="Wheels stuck","502"="Low battery","503"="Dust bin missing","508"="Uneven ground","509"="Cliff sensor erro","510"="Collision sensor error","511"="Could not return to dock","512"="Could not return to dock","513"="Could not navigate","514"="Vacuum stuck","515"="Charging erro","516"="Mop temperature error","521"="Water tank is not installed","522"="Mop is not installed","525"="Insufficient water in water tank","527"="Remove mop","528"="Dust bin missing","529"="Mop and water tank missing","530"="Mop and water tank missin","531"="Water tank is not installed","2101"="Unsufficient battery, continuing cleaning after recharge","2103"="Charging","2104"="Fully charged"]
battery_life Number Battery
box_type Number Box type Value mapping ["0"="No Bin","1"="Sweep","2"="Mop","3"="Sweep and Mop"]
mop_type Number mop_type
mop_route Number Mop Route Value mapping ["0"="S-Pattern","1"="Y-Pattern"]
s_time Number Clean time
s_area Number Clean Area
suction_grade Number suction_grade Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
water_grade Number water_grade Value mapping ["11"="Low","12"="Medium","13"="High"]
remember_map Number remember_map
has_map Number has_map
is_mop Number is_mop Value mapping ["0"="Vacuum","1"="Vacuum And Mop","2"="Mop","3"="CleanZone","4"="CleanSpot"]
has_newmap Number has_newmap

# Viomi S9 (viomi.vacuum.v18) Channels

Channel Type Description Comment
vacuumaction String Vacuum Action Value mapping ["start-sweep"="Sweep","stop-sweeping"="Stop Sweep","pause"="Pause","start-charge"="Goto Dock","stop-massage"="Stop Sweep","start-mop"="Start Mop","start-only-sweep"="Start Sweep Only","start-sweep-mop"="Start Sweep Mop"]
status Number Robot Cleaner - Status Value mapping ["0"="Sleep","1"="Idle","2"="Paused","3"="Go Charging","4"="Charging","5"="Sweeping","6"="Sweeping and Mopping","7"="Mopping"]
fault Number Robot Cleaner - Device Fault Value mapping ["0"="No Error","1"="Low Battery Find Charge","2"="Low Bat Need Poweroff","3"="Wheel Trap","4"="Collision Error","5"="Tile Do Task","6"="Lidar Point Err","7"="Front Wall Err","8"="Along Wall Err","9"="Mid Brush Err","10"="Side Brush Err","11"="Fan Err","12"="Lidar Cover","13"="Garbage Full","14"="Garbage Out","15"="Garbage Full Out","16"="Trapped","17"="Pick Up","20"="Cannot Arrive","21"="Start From Forbid","22"="Drop","23"="Kit Water Pump","24"="Find Charge Failed","18"="Garbage Out","25"="No Mop Clean","26"="Low Battery Cant Clean"]
wdr-mode Number Robot Cleaner - Wide Dynamic Range Mode Value mapping ["0"="Mode 0","1"="Mode 1","2"="Mode 2"]
door-state Number Robot Cleaner - Door State Value mapping ["0"="Door 0","1"="Door 1","2"="Door 2","3"="Door 3"]
contact-state Number Robot Cleaner - Contact State Value mapping ["0"="Off","1"="On"]
contact-state1 Number:Time Robot Cleaner - Contact State
contact-state2 Number Robot Cleaner - Contact State
mute Number Robot Cleaner - Mute
sweep-type Number Robot Cleaner - Sweep Type Value mapping ["0"="Total","2"="Wall","3"="Zone","4"="Point","5"="Control"]
mode Number Robot Cleaner - Mode Value mapping ["0"="Silent","1"="Basic","2"="Medium","3"="Strong"]
battery-level Number:Dimensionless Battery - Battery Level
repeat-state Switch Viomi Vacuum - Repeat State
remember-state Switch Viomi Vacuum - Remember State Value mapping ["0"="关","1"="开"]
mop-route Number Viomi Vacuum - Mop Route Value mapping ["0"="C-Curved","1"="Y-Route"]
side-brush-life Number:Dimensionless Viomi Vacuum - Side Brush Life
side-brush-hours Number:Time Viomi Vacuum - Side Brush Hours
main-brush-life Number:Dimensionless Viomi Vacuum - Main Brush Life
main-brush-hours Number:Time Viomi Vacuum - Main Brush Hours
hypa-life Number:Dimensionless Viomi Vacuum - Hypa Life
hypa-hours Number:Time Viomi Vacuum - Hypa Hours
mop-life Number:Dimensionless Viomi Vacuum - Mop Life
mop-hours Number:Time Viomi Vacuum - Mop Hours
suction-grade Number Viomi Vacuum - Suction Grade Value mapping ["0"="Silent","1"="Standard","2"="Medium","3"="Strong"]
water-grade Number Viomi Vacuum - Water Grade Value mapping ["0"="1 Block","1"="2 Blocks","2"="3 Blocks"]
map-num Number Viomi Vacuum - Map Num
time-zone Number Viomi Vacuum - Time Zone
clean-start-time Number:Time Viomi Vacuum - Clean Start Time
clean-use-time Number:Time Viomi Vacuum - Clean Use Time
clean-area Number Viomi Vacuum - Clean Area
clean-map-url String Viomi Vacuum - Clean Map Url
clean-mode Number Viomi Vacuum - Clean Mode Value mapping ["0"="Everywhere","1"="Edges","2"="Surface","3"="Fixed Location"]
clean-way Number Viomi Vacuum - Clean Way Value mapping ["0"="Sweep Floor","1"="Sweep","2"="Mop"]
cur-lang String Viomi Vacuum - Cur Lang
cur-map-id Number Viomi Vacuum - Cur Map Id
cur-map-url String Viomi Vacuum - Cur Map Url
last-update-time Number:Time Viomi Vacuum - Last Update Time
has-map Number Viomi Vacuum - Has Map Value mapping ["0"="No map in memory","1"="Map in memory"]
has-newmap Number Viomi Vacuum - Has Newmap Value mapping ["0"="None","1"="New","2"="Cover"]
dust-collection Number Viomi Vacuum - Dust Collection Value mapping ["0"="Close","1"="Open"]
dnd-enable Number Order - Dnd Enable Value mapping ["0"="Disabled","1"="Enabled"]
dnd-start-hour Number:Time Order - Dnd Start Hour
dnd-start-minute Number:Time Order - Dnd Start Minute
dnd-end-hour Number:Time Order - Dnd End Hour
dnd-end-minute Number:Time Order - Dnd End Minute
dnd-timezone Number Order - Dnd Timezone
timestamp Number Order - Timestamp
orderdata String Order - Orderdata
target-point String Point Zone - Target Point
map-type Number Map - Map Type Value mapping ["0"="Upload to url0","1"="Upload to url1","2"="Upload to url2"]
map-id Number Map - Map Id
map-name String Map - Map Name
cur-cleaning-path String Map - Cur Cleaning Path
map-list String Map - Map List
oper-result String Map - Oper Result
auto-area-id Number Map - Auto Area Id
target-voice String Voice - Target Voice
cur-voice String Voice - Cur Voice
download-status Number Voice - Download Status Value mapping ["0"="Free","1"="Downloading"]
download-progress Number:Dimensionless Voice - Download Progress

# VIOMI Internet Electric Water Heater 1A (60L) (viomi.waterheater.e1) Channels

Channel Type Description Comment
washStatus Number Wash Status
velocity Number Velocity
waterTemp Number:Temperature Water Temperature
targetTemp Number:Temperature Target Temperature
errStatus Number Error Status
hotWater Number Hot Water
needClean Switch Need Clean
modeType Number Mode
appointStart Number Appoint Start
appointEnd Number Appoint End

# Mi Inverter Air Conditioner (1.5HP) (xiaomi.aircondition.ma1) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
sleep-mode Switch Air Conditioner - Sleep Mode
dryer Switch Air Conditioner - Dryer
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status

# Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1) (xiaomi.aircondition.ma2) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
sleep-mode Switch Air Conditioner - Sleep Mode
dryer Switch Air Conditioner - Dryer
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status

# Mi Vertical Air Conditioner (2HP) (xiaomi.aircondition.ma4) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
sleep-mode Switch Air Conditioner - Sleep Mode
dryer Switch Air Conditioner - Dryer
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status

# Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma5) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
sleep-mode Switch Air Conditioner - Sleep Mode
dryer Switch Air Conditioner - Dryer
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status

# Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3) (xiaomi.aircondition.ma6) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
sleep-mode Switch Air Conditioner - Sleep Mode
dryer Switch Air Conditioner - Dryer
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status

# Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma9) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["1"="Cool","2"="Dry","3"="Heat","4"="Fan"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
sleep-mode Switch Air Conditioner - Sleep Mode
dryer Switch Air Conditioner - Dryer
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status

# Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc1) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc2) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc4) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc5) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc6) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc7) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc8) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc9) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c10) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c11) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh1) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh2) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mh3) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt1) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt2) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt3) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt4) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt5) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt7) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt8) Channels

Channel Type Description Comment
on Switch Power
mode Number Air Conditioner - Mode Value mapping ["2"="Cool","3"="Dry","4"="Fan","5"="Heat"]
target-temperature Number:Temperature Air Conditioner - Target Temperature
eco Switch Air Conditioner - Eco
heater Switch Air Conditioner - Heater
dryer Switch Air Conditioner - Dryer
sleep-mode Switch Air Conditioner - Sleep Mode
fan-level Number Fan Control - Fan Level Value mapping ["0"="Auto","1"="Level1","2"="Level2","3"="Level3","4"="Level4","5"="Level5","6"="Level6","7"="Level7"]
vertical-swing Switch Fan Control - Vertical Swing
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
on1 Switch Indicator Light - Switch Status
electricity Number:Energy Power consumption accumulation in kWh
elec-count Number Electricity - Count
clean String Maintenance - Clean
examine String Maintenance - Examine
running-duration Number:Time Maintenance - Running Duration
fan-percent Number:Dimentionless Fan Speed %
timer String Enhance - Timer

# Uclean Smart Toilet Seat (xjx.toilet.pro) Channels

Channel Type Description Comment
seat_temp Number:Temperature Seat Temperature
status_seatheat Number Seat Status
water_temp_t Number:Temperature Water Temperature
fan_temp Number:Temperature Fan Temperature
status_led Number Night Light

# Uclean Smart Toilet pure (xjx.toilet.pure) Channels

Channel Type Description Comment
seat_temp Number:Temperature Seat Temperature
status_seatheat Number Seat Status
water_temp_t Number:Temperature Water Temperature
fan_temp Number:Temperature Fan Temperature
status_led Number Night Light

# Uclean Smart Toilet relax (xjx.toilet.relax) Channels

Channel Type Description Comment
seat_temp Number:Temperature Seat Temperature
status_seatheat Number Seat Status
water_temp_t Number:Temperature Water Temperature
fan_temp Number:Temperature Fan Temperature
status_led Number Night Light

# Whale Spout Smart Toilet Zero (xjx.toilet.zero) Channels

Channel Type Description Comment
seat_temp Number:Temperature Seat Temperature
status_seatheat Number Seat Status
water_temp_t Number:Temperature Water Temperature
fan_temp Number:Temperature Fan Temperature
status_led Number Night Light
Channel Type Description Comment
power Switch Power
bh_mode String Bath Heater mode
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
temperature Number:Temperature Temperature
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
bh_mode String Bath Heater mode
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
temperature Number:Temperature Temperature
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
ambientBrightness Dimmer Ambient Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
ambientPower Switch Ambient Power
ambientColor Color Ambient Color
ambientColorTemperature Number Ambient Color Temperature
customScene String Set Scene
ambientColorMode Number Ambient Color Mode
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
ambientBrightness Dimmer Ambient Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
ambientPower Switch Ambient Power
ambientColor Color Ambient Color
ambientColorTemperature Number Ambient Color Temperature
customScene String Set Scene
ambientColorMode Number Ambient Color Mode
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number:Temperature Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
rgbColor Color RGB Color
ambientBrightness Number Ambient Brightness
ambientPower Switch Ambient Power
ambientColor Color Ambient Color
ambientColorTemperature Number Ambient Color Temperature
ambientColorMode Number Ambient Color Mode
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
rgbColor Color RGB Color
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
colorflow Switch Color Flow
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
Channel Type Description Comment
on Switch First Switch - Switch Status
mode Number First Switch Default - Mode Value mapping ["0"="Off","1"="On"]
mode1 Number First Switch - Delay
on1 Switch Second Switch - Switch Status
mode2 Number Second Switch Default - Mode Value mapping ["0"="Off","1"="On"]
mode3 Number Second Switch Service - Delay
interlock Switch Extension - Interlock
flash Number Extension - Flash
rc-list String Extension - Rc List

# Yilai Ceiling Light Aiyue 480 (yilai.light.ceiling1) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness

# Yilai Ceiling Lamp Hefeng 430 (yilai.light.ceiling2) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness

# Yilai Ceiling Lamp Hefeng Pro (yilai.light.ceiling3) Channels

Channel Type Description Comment
power Switch Power
brightness Dimmer Brightness
delayoff Number:Time Shutdown Timer
colorTemperature Number Color Temperature
colorMode Number Color Mode Note, currently only supporting switching to RGB or CT mode. Value mapping ["0"="Default","2"="CT mode","1"="RGB mode","3"="HSV mode","4"="Color Flow mode","5"="Night Light mode"]
name String Name
customScene String Set Scene
nightlightBrightness Number Nightlight Brightness

# Mi Water Purifier lx2 (yunmi.waterpuri.lx2) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx3) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier lx4 (yunmi.waterpuri.lx4) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier 1A/400G Pro (yunmi.waterpuri.lx5) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx6) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier 500G/500G Pro (yunmi.waterpuri.lx7) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier 600G (yunmi.waterpuri.lx8) Channels

Channel Type Description Comment
run_status Number Run Status
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier D1 (yunmi.waterpuri.lx9) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier lx10 (yunmi.waterpuri.lx10) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier C1 (Triple Setting) (yunmi.waterpuri.lx11) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier S1 (yunmi.waterpuri.lx12) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier v1 (yunmi.waterpurifier.v1) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier v2 (yunmi.waterpurifier.v2) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier (Under sink) v3 (yunmi.waterpurifier.v3) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Mi Water Purifier v4 (yunmi.waterpurifier.v4) Channels

Channel Type Description Comment
run_status Number Run Status
temperature Number:Temperature Temperature
rinse Number Rinse
tds_in Number TDS in
tds_out Number TDS out
f1_totalflow Number Filter 1 Total Flow
f1_totaltime Number Filter 1 Total Time
f1_usedflow Number Filter 1 Used Flow
f1_usedtime Number Filter 1 Used Time
f2_totalflow Number Filter 2 Total Flow
f2_totaltime Number Filter 2 Total Time
f2_usedflow Number Filter 2 Used Flow
f2_usedtime Number Filter 2 Used Time
f3_totalflow Number Filter 3 Total Flow
f3_totaltime Number Filter 3 Total Time
f3_usedflow Number Filter 3 Used Flow
f3_usedtime Number Filter 3 Used Time
f4_totalflow Number Filter 4 Total Flow
f4_totaltime Number Filter 4 Total Time
f4_usedflow Number Filter 4 Used Flow
f4_usedtime Number Filter 4 Used Time
maintenance_state Number Maintenance State
maintenance_interval Number Maintenance Interval
tds_warn_thd Number TDS Warn Threshold
tds_out_avg Number Average TDS out
lightMode Number Light Mode Value mapping ["0"="Simple Mode","1"="Special Mode"]

# Smartmi Ventilation System (zhimi.airfresh.va2) Channels

Channel Type Description Comment
power Switch Power
heater Switch Heater
mode String Mode Value mapping ["interval"="Interval","silent"="Night","low"="1","middle"="2","strong"="3","auto"="Auto"]
humidity Number:Dimensionless Humidity
co2 Number:Dimensionless CO2
childLock Switch Child Lock
buzzer Switch Buzzer
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
led_level Number Led - Brightness Value mapping ["0"="High","1"="Low","2"="Idle"]
temperature Number:Temperature Temperature

# Smartmi Fresh Air System (Heating) (zhimi.airfresh.va4) Channels

Channel Type Description Comment
power Switch Power
heater Switch Heater
mode String Mode Value mapping ["interval"="Interval","silent"="Night","low"="1","middle"="2","strong"="3","auto"="Auto"]
humidity Number:Dimensionless Humidity
co2 Number:Dimensionless CO2
childLock Switch Child Lock
buzzer Switch Buzzer
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
led_level Number Led - Brightness Value mapping ["0"="High","1"="Low","2"="Idle"]
temperature Number:Temperature Temperature

# Mi Fresh Air Ventilator C1-80 (zhimi.airfresh.ua1) Channels

Channel Type Description Comment
actions String Actions Value mapping ["filter-reset-filter-life"="Filter Reset Filter Life"]
on Switch Air Fresh - Switch Status
fault Number Device Fault Value mapping ["0"="No Faults"]
fan_level Number Air Fresh - Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
heater Switch Heater
filter_used_time Number:Time Filter - Filter Used Time
filter_life_level Number:Dimensionless Filter - Filter Life Level
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
alarm Switch Alarm - Alarm
brightness Dimmer Indicator Light - Brightness
motor_a_speed_rpm Number Custom Service - Motor A Speed Rpm
motor_b_speed_rpm Number Custom Service - Motor B Speed Rpm
temperature Number:Temperature Custom Service - Temperature

# Mi PM2.5 Air Quality Monitor (zhimi.airmonitor.v1) Channels

Channel Type Description Comment
power Switch Power
aqi Number Air Quality Index
battery Number Battery
usb_state Switch USB State
time_state Switch Time State
night_state Switch Night State
night_begin Number Night Begin Time
night_end Number Night End Time

# Mi Air Purifier 3C (zhimi.airp.mb4a) Channels

Channel Type Description Comment
actions String Actions Value mapping ["filter-reset-filter-life"="Filter Reset Filter Life"]
on Switch Power
fault String Air Purifier - Device Fault
mode Number Mode Value mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_density Number Environment - PM2 5 Density
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_used_time Number:Time Filter - Filter Used Time
alarm Switch Alarm - Alarm
brightness Number Screen - Brightness
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
moto_speed_rpm Number Custom Service - Moto Speed Rpm
miio_lib_version String Custom Service - Miio Lib Version
favorite_speed Number Custom Service - Favorite Speed
aqi_updata_heartbeat Number:Time Custom Service - Aqi Updata Heartbeat

# Mi Air Purifier 2 (mini) (zhimi.airpurifier.m1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier 2 (zhimi.airpurifier.m2) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier 2S (zhimi.airpurifier.ma1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier 2S (zhimi.airpurifier.ma2) Channels

Channel Type Description Comment
power Switch Power
mode String Mode
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
bright Dimmer LED Brightness
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level
temperature Number:Temperature Temperature
purifyvolume Number Purivied Volume
childlock Switch Child Lock

# Mi Air Purifier 3 (zhimi.airpurifier.ma4) Channels

Channel Type Description Comment
fault Number Air Purifier - Device Fault Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp"]
on Switch Air Purifier - Switch Status
fan-level Number Air Purifier - Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
mode Number Air Purifier - Mode Value mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="None"]
pm2_5-density Number Environment - Pm2.5 Density
relative-humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
filter-life-level Number:Dimensionless Filter - Filter Life Level
filter-used-time Number:Time Filter - Filter Used Time
alarm Switch Alarm - Alarm
brightness Number:Dimensionless Indicator Light - Brightness Value mapping ["0"="brightest","1"="glimmer","2"="led_closed"]
on1 Switch Indicator Light - Switch Status
physical-controls-locked Switch Physical Control Locked - Physical Control Locked
button-pressed String Button - Button_pressed
filter-max-time Number:Time Filter Time - Filter Max Time
filter-hour-used-debug Number Filter Time - Filter Hour Used Debug
m1-strong Number Motor Speed - M1 Strong
m1-high Number Motor Speed - M1 High
m1-med Number Motor Speed - M1 Med
m1-med-l Number Motor Speed - M1 Med L
m1-low Number Motor Speed - M1 Low
m1-silent Number Motor Speed - M1 Silent
m1-favorite Number Motor Speed - M1 Favorite
motor1-speed Number Motor Speed - Motor1 Speed
motor1-set-speed Number Motor Speed - Motor1 Set Speed
favorite-fan-level Number Motor Speed - Favorite Fan Level
use-time Number:Time Use Time - Use Time
purify-volume Number:Volume Aqi - Purify Volume
average-aqi Number Aqi - Average Aqi
average-aqi-cnt Number Aqi - Average Aqi Cnt
aqi-zone String Aqi - Aqi Zone
sensor-state String Aqi - Sensor State
aqi-goodh Number Aqi - Aqi Goodh
aqi-runstate Number Aqi - Aqi Runstate Value mapping ["0"="continue","1"="hold","2"="sleep"]
aqi-state Number Aqi - Aqi State Value mapping ["0"="AQI_GOOD_L","1"="AQI_GOOD_H","2"="AQI_MID_L","3"="AQI_MID_H","4"="AQI_BAD_L","5"="AQI_BAD_H"]
aqi-updata-heartbeat Number Aqi - Aqi Updata Heartbeat
rfid-tag String Rfid - Rfid Tag
rfid-factory-id String Rfid - Rfid Factory Id
rfid-product-id String Rfid - Rfid Product Id
rfid-time String Rfid - Rfid Time
rfid-serial-num String Rfid - Rfid Serial Num
app-extra Number Others - App Extra
main-channel Number Others - Main Channel
slave-channel Number Others - Slave Channel
cola String Others - Cola
buttom-door Switch Others - Buttom Door
reboot-cause Number Others - Reboot_cause Value mapping ["0"="REASON_HW_BOOT","1"="REASON_USER_REBOOT","2"="REASON_UPDATE","3"="REASON_WDT"]
hw-version Number Others - Hw Version
i2c-error-count Number Others - I2c Error Count
manual-level Number Others - Manual Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]

# Mi Air Purifier 2S (zhimi.airpurifier.mb1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier 3/3H (zhimi.airpurifier.mb3) Channels

Channel Type Description Comment
fault Number Air Purifier - Fault Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp"]
on Switch Air Purifier - Switch Status
fan-level Number Air Purifier - Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
mode Number Air Purifier - Mode Value mapping ["0"="Auto","1"="Sleep","2"="Favorite","3"="None"]
pm2_5-density Number Environment - Pm2.5 density
relative-humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
filter-life-level Number:Dimensionless Filter - Filter Life Level
filter-used-time Number:Time Filter - Filter Used Time
alarm Switch Alarm - Alarm
brightness Number:Dimensionless Indicator Light - Brightness Value mapping ["0"="Brightest","1"="Glimmer","2"="Led Closed"]
on1 Switch Indicator Light - Switch Status
physical-controls-locked Switch Physical Control Locked - Physical Control Locked
button-pressed String Button - Button Pressed
filter-max-time Number Filter Time - Filter Max Time
filter-hour-debug Number Filter Time - Filter Hour Debug
motor-strong Number Motor Speed - Motor Strong
motor-high Number Motor Speed - Motor High
motor-med Number Motor Speed - Motor Med
motor-med-l Number Motor Speed - Motor Med L
motor-low Number Motor Speed - Motor Low
motor-silent Number Motor Speed - Motor Silent
motor-favorite Number Motor Speed - Motor Favorite
motor-speed Number Motor Speed - Motor Speed
motor-set-speed Number Motor Speed - Motor Set Speed
favorite-fan-level Number Motor Speed - Favorite Fan Level
use-time Number:Time Use Time - Use Time
purify-volume Number:Volume Aqi - Purify Volume
average-aqi Number Aqi - Average Aqi
average-aqi-cnt Number Aqi - Average Aqi Cnt
aqi-zone String Aqi - Aqi Zone
sensor-state String Aqi - Sensor State
aqi-goodh Number Aqi - Aqi Goodh
aqi-runstate Number Aqi - Aqi Runstate Value mapping ["0"="continuous sampling","1"="preparing sampling","2"="stop sampling"]
aqi-state Number Aqi - Aqi State Value mapping ["0"="best","1"="good","2"="normal","3"="bad","4"="worse","5"="unhealthy"]
aqi-updata-heartbeat Number Aqi - Aqi Updata Heartbeat
rfid-tag String Rfid - Rfid Tag
rfid-factory-id String Rfid - Rfid Factory Id
rfid-product-id String Rfid - Rfid Product Id
rfid-time String Rfid - Rfid Time
rfid-serial-num String Rfid - Rfid Serial Num
app-extra Number Others - App Extra
main-channel Number Others - Main Channel
slave-channel Number Others - Slave Channel
cola String Others - Cola
buttom-door Switch Others - Buttom Door
reboot-cause Number Others - Reboot Cause Value mapping ["0"="hardware reboot","1"="software reboot","2"="update reboot","3"="dog reboot"]
hw-version Number Others - Hw Version
iic-error-count Number Others - Iic Error Count
manual-level Number Others - Manual Level Value mapping ["1"="Level1","2"="Level2","3"="Level3"]
country-code Number Others - National Code Value mapping ["91"="India","44"="UK","852"="Hong Kong","886"="Taiwan","82"="Korea"]

# Mi Air Purifier 3C (zhimi.airpurifier.mb4) Channels

Channel Type Description Comment
on Switch Power
fault String Air Purifier - Device Fault
mode Number Mode Value mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
pm2_5_density Number Environment - Pm2 5 Density
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_used_time Number:Time Filter - Filter Used Time
alarm Switch Alarm - Alarm
brightness Number Screen - Brightness
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
moto_speed_rpm Number Custom Service - Moto Speed Rpm
miio_lib_version String Custom Service - Miio Lib Version
favorite_speed Number Custom Service - Favorite Speed
aqi_updata_heartbeat Number:Time Custom Service - Aqi Updata Heartbeat

# Mi Air Purifier 2S (zhimi.airpurifier.mc1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier 2H (zhimi.airpurifier.mc2) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier Super (zhimi.airpurifier.sa1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier MAX / MAX Pro (zhimi.airpurifier.sa2) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier v1 (zhimi.airpurifier.v1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier v2 (zhimi.airpurifier.v2) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier v3 (zhimi.airpurifier.v3) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier v5 (zhimi.airpurifier.v5) Channels

Channel Type Description Comment
power Switch Power
mode String Mode Value mapping ["auto"="Auto","favorite"="Favorite","silent"="Silent","high"="High","medium"="Medium","idle"="Idle","strong"="Strong"]
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
buzzer Switch Buzzer Status
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level Value mapping ["0"="Favorite 0","1"="Favorite 1","2"="Favorite 2","3"="Favorite 3","4"="Favorite 4","5"="Favorite 5","6"="Favorite 6","7"="Favorite 7","8"="Favorite 8","9"="Favorite 9","10"="Favorite 10","11"="Favorite 11","12"="Favorite 13","13"="Favorite 13","14"="Favorite 14","15"="Favorite 15"]
temperature Number:Temperature Temperature
purifyvolume Number:Volume Purified Volume
childlock Switch Child Lock

# Mi Air Purifier Pro v6 (zhimi.airpurifier.v6) Channels

Channel Type Description Comment
power Switch Power
mode String Mode
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
led Switch LED Status
bright Dimmer LED Brightness
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
usedhours Number:Time Run Time
motorspeed Number Motor Speed
filterlife Number Filter Life
favoritelevel Number Favorite Level
temperature Number:Temperature Temperature
purifyvolume Number Purivied Volume
childlock Switch Child Lock

# Mi Air Purifier Pro v7 (zhimi.airpurifier.v7) Channels

Channel Type Description Comment
power Switch Power
mode String Mode
humidity Number:Dimensionless Humidity
aqi Number Air Quality Index
averageaqi Number Average Air Quality Index
volume Number Volume
led Switch LED Status
illuminance Number Illuminance
filtermaxlife Number Filter Max Life
filterhours Number:Time Filter Hours used
motorspeed Number Motor Speed
motorspeed2 Number Motor Speed 2
filterlife Number Filter Life
favoritelevel Number Favorite Level
temperature Number:Temperature Temperature
childlock Switch Child Lock

# Mi Air Purifier Pro H (zhimi.airpurifier.vb2) Channels

Channel Type Description Comment
actions String Actions Value mapping ["button-toggle"="Toggle","button-toggle-mode"="Toggle Mode"]
fault Number Air Purifier - Device Fault Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp","6"="timer_error1","7"="timer_error2"]
on Switch Air Purifier - Power
fan_level Number Air Purifier - Fan Level Value mapping ["1"="Level1","2"="Level2","3"="Level3","0"="Sleep"]
mode Number Air Purifier - Mode Value mapping ["0"="Auto","1"="Night","2"="Favourite","3"="Manual"]
pm2_5_density Number Environment - PM2 5 Density
relative_humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_used_time Number:Time Filter - Filter Used Time
alarm Switch Alarm - Alarm
volume Number:Dimensionless Alarm - Volume
brightness Number Indicator Light - Brightness Value mapping ["0"="brightest","1"="glimmer","2"="not bright"]
on1 Switch Indicator Light - Switch Status
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
button_pressed String Button - Button_pressed
filter_max_time Number:Time Filter Time - Filter Max Time
filter_hour_used_debug Number:Time Filter Time - Filter Hour Used Debug
m1_strong Number Motor Speed - M1 Strong
m1_high Number Motor Speed - M1 High
m1_med Number Motor Speed - M1 Med
m1_med_l Number Motor Speed - M1 Med L
m1_low Number Motor Speed - M1 Low
m1_silent Number Motor Speed - M1 Silent
m1_favorite Number Motor Speed - M1 Favorite
motor1_speed Number Motor Speed - Motor1 Speed
motor1_set_speed Number Motor Speed - Motor1 Set Speed
favorite_level Number Motor Speed - Favorite Level
use_time Number:Time Use Time - Use Time
purify_volume Number Aqi - Purify Volume
average_aqi Number Aqi - Average Aqi
average_aqi_cnt Number Aqi - Average_aqi Read Times
aqi_zone String Aqi - Aqi Zone
sensor_state Number Aqi - Sensor State Value mapping ["0"="waiting","1"="ready"]
aqi_goodh Number Aqi - Aqi Goodh
aqi_runstate Number Aqi - Runstate Value mapping ["0"="continue","1"="hold","2"="sleep"]
aqi_state Number Aqi - Aqi State Value mapping ["0"="AQI_GOOD_L","1"="AQI_GOOD_H","2"="AQI_MID_L","3"="AQI_MID_H","4"="AQI_BAD_L","5"="AQI_BAD_H"]
rfid_tag String Rfid - Rfid Tag
rfid_factory_id String Rfid - Rfid Factory Id
rfid_product_id String Rfid - Rfid Product Id
rfid_time String Rfid - Rfid Time
rfid_serial_num String Rfid - Rfid Serial Num
app_extra Number Others - App Extra
main_channel Number Others - Main Channel
slave_channel Number Others - Slave Channel
cola String Others - Cola
buttom_door String Others - Buttom Door
reboot_cause Number Others - Reboot_cause Value mapping ["0"="REASON_HW_BOOT","1"="REASON_USER_REBOOT","2"="REASON_UPDATE","3"="REASON_WDT"]
manual_level Number Others - Manual Level Value mapping ["1"="level1","2"="level2","3"="level3"]
powertime Number:Time Others - Powertime
country_code Number Others - Country Code Value mapping ["91"="India","44"="UK","852"="Hong Kong","886"="Taiwan","82"="Korea"]

# Smartmi Air Purifier (zhimi.airpurifier.za1) Channels

Channel Type Description Comment
on Switch Air Purifier - Switch Status
fault Number Air Purifier - Fault Value mapping ["0"="No faults","1"="m1_run","2"="m1_stuck","3"="no_sensor","4"="error_hum","5"="error_temp","6"="timer_error1","7"="timer_error2"]
mode Number Air Purifier - Mode Value mapping ["0"="Auto","1"="Sleep","2"="Favorite"]
air_quality Number Environment - Air Quality
pm2_5_density Number Environment - PM2 5 Density
relative_humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
filter_life_level Number:Dimensionless Filter - Filter Life Level
filter_used_time Number:Time Filter - Filter Used Time
alarm Switch Alarm - Alarm
brightness Number Indicator Light - Brightness Value mapping ["0"="Bright","1"="Light","2"="Off"]
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
filter_max_time Number:Time Filter Time - Filter Max Time
favorite_fan_level Number Motor Speed - Favorite Fan Level
motor_speed Number Motor Speed - Motor Speed
use_time Number:Time Use Time - Use Time
purify_volume Number Aqi - Purify Volume
average_aqi Number Aqi - Average Aqi
aqi_zone String Aqi - Aqi Zone
sensor_state Number Aqi - Sensor State Value mapping ["0"="waiting","1"="ready"]
rfid_tag String Rfid - Rfid Tag
rfid_factory_id String Rfid - Rfid Factory Id
rfid_product_id String Rfid - Rfid Product Id
rfid_time String Rfid - Rfid Time
rfid_serial_num String Rfid - Rfid Serial Num
reboot_cause Number Others - Reboot Cause Value mapping ["0"="hardware","1"="human","2"="upgrade","3"="watchdog"]
hw_version Number Others - Hw Version
sgp_ethanol Number Others - Sgp Ethanol
sgp_serial Number Others - Sgp Serial
sgp_version String Others - Sgp Version
country_code Number Others - Country Code Value mapping ["1"="America","2"="Canada","3"="Singapore","4"="Europe","5"="Australian","6"="Korea","7"="China","8"="France","9"="Japanese","10"="Taiwan"]
gesture_status Switch Others - Gesture Status

# Mi Standing Fan (zhimi.fan.sa1) Channels

Channel Type Description Comment
power Switch Power
angleEnable Switch Rotation
usedhours Number:Time Run Time
angle Number:Angle Angle Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime Number:Time Power-Off Timer
buzzer Switch Buzzer
led_b Number LED Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock Switch Child Lock
speedLevel Dimmer Speed Level
speed Number Speed
naturalLevel Dimmer Natural Level
acPower Switch AC Power
move String Move Direction Value mapping [""="None","left"="Left","right"="Right"]

# Mi Smart Fan (zhimi.fan.v1) Channels

Channel Type Description Comment
power Switch Power
angleEnable Switch Rotation
usedhours Number:Time Run Time
angle Number:Angle Angle Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime Number:Time Power-Off Timer
buzzer Switch Buzzer
led_b Number LED Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock Switch Child Lock
speedLevel Dimmer Speed Level
speed Number Speed
naturalLevel Dimmer Natural Level
temp_dec Number Temperature
humidity Number:Dimensionless Humidity
acPower Switch AC Power
mode String Battery Charge
battery Number Battery
move String Move Direction Value mapping [""="None","left"="Left","right"="Right"]

# Smartmi DC Pedestal Fan (zhimi.fan.v2) Channels

Channel Type Description Comment
power Switch Power
angleEnable Switch Rotation
usedhours Number:Time Run Time
angle Number:Angle Angle Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime Number:Time Power-Off Timer
buzzer Switch Buzzer
led_b Number LED Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock Switch Child Lock
speedLevel Dimmer Speed Level
speed Number Speed
naturalLevel Dimmer Natural Level
temp_dec Number Temperature
humidity Number:Dimensionless Humidity
acPower Switch AC Power
mode String Battery Charge
battery Number Battery
move String Move Direction Value mapping [""="None","left"="Left","right"="Right"]

# Smartmi DC Pedestal Fan (zhimi.fan.v3) Channels

Channel Type Description Comment
power Switch Power
angleEnable Switch Rotation
usedhours Number:Time Run Time
angle Number:Angle Angle Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime Number:Time Power-Off Timer
buzzer Switch Buzzer
led_b Number LED Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock Switch Child Lock
speedLevel Dimmer Speed Level
speed Number Speed
naturalLevel Dimmer Natural Level
temp_dec Number Temperature
humidity Number:Dimensionless Humidity
acPower Switch AC Power
mode String Battery Charge
battery Number Battery
move String Move Direction Value mapping [""="None","left"="Left","right"="Right"]

# Smartmi Inverter Pedestal Fan (zhimi.fan.za1) Channels

Channel Type Description Comment
power Switch Power
angleEnable Switch Rotation
usedhours Number:Time Run Time
angle Number:Angle Angle Value mapping ["30"="30","60"="60","90"="90","120"="120"]
poweroffTime Number:Time Power-Off Timer
buzzer Switch Buzzer
led_b Number LED Value mapping ["0"="Bright","1"="Dimmed","2"="Off"]
child_lock Switch Child Lock
speedLevel Dimmer Speed Level
speed Number Speed
naturalLevel Dimmer Natural Level
acPower Switch AC Power
move String Move Direction Value mapping [""="None","left"="Left","right"="Right"]

# Smartmi Standing Fan 2 (zhimi.fan.za3) Channels

Channel Type Description Comment
power Switch Power
angleEnable Switch Rotation
usedhours Number:Time Run Time
angle Number Angle
poweroffTime Number Timer
buzzer Number Buzzer
led_b Number LED
child_lock Switch Child Lock
speedLevel Number Speed Level
speed Number Speed
naturalLevel Number Natural Level
move String Move Direction Value mapping [""="None","left"="Left","right"="Right"]

# Smartmi Standing Fan 2S (zhimi.fan.za4) Channels

Channel Type Description Comment
power Switch Power
angleEnable Switch Rotation
usedhours Number:Time Run Time
angle Number Angle
poweroffTime Number Timer
buzzer Number Buzzer
led_b Number LED
child_lock Switch Child Lock
speedLevel Number Speed Level
speed Number Speed
naturalLevel Number Natural Level
move String Move Direction Value mapping [""="None","left"="Left","right"="Right"]

# Smartmi Standing Fan 3 (zhimi.fan.za5) Channels

Channel Type Description Comment
on Switch Fan - Power
fan_level Number Fan - Fan Level Value mapping ["1"="Level 1","2"="Level 2","3"="Level 3","4"="Level 4"]
horizontal_swing Switch Fan - Horizontal Swing
horizontal_angle Number Fan - Horizontal Angle
mode Number Fan - Mode Value mapping ["0"="Natural Wind","1"="Straight Wind"]
off_delay Number Fan - Power Off Delay
anion Switch Fan - Anion
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
brightness Number:Dimensionless Indicator Light - Brightness
alarm Switch Alarm - Alarm
relative_humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
button_press Number Custom Service - Button Press Value mapping ["1"="power","2"="swing","0"="No Button Pressed"]
battery_state Switch Custom Service - Battery State
speed_now Number Custom Service - Speed Now
ac_state Switch Custom Service - Ac State
speed_level Number:Dimensionless Custom Service - Speed Level

# Mi Smart Space Heater S (zhimi.heater.ma2) Channels

Channel Type Description Comment
on Switch Heater - Switch Status
fault Number Heater - Fault Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperature Number:Temperature Heater - Target Temperature
countdown_time Number:Time Countdown - Countdown Time
temperature Number:Temperature Environment - Temperature
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
alarm Switch Alarm - Alarm
brightness Number:Dimensionless Indicator Light - Brightness Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
hw_enable Switch Private Service - Hw Enable
use_time Number:Time Private Service - Use Time

# Mi Smart Baseboard Heater E (zhimi.heater.ma3) Channels

Channel Type Description Comment
actions String Actions Value mapping ["private-service-toggle-switch"="Toggle Private Service"]
on Switch Heater - Switch Status
fault Number Heater - Fault Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperature Number:Temperature Heater - Target Temperature
mode Number Heater - Mode Value mapping ["0"="Auto","1"="LL Mode","2"="HH Mode"]
countdown_time Number:Time Countdown - Countdown Time
temperature Number:Temperature Environment - Temperature
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
alarm Switch Alarm - Alarm
brightness Number:Dimensionless Indicator Light - Brightness Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
use_time Number:Time Private Service - Use Time

# Mi Smart Space Heater S (zhimi.heater.mc2) Channels

Channel Type Description Comment
on Switch Heater - Power
fault Number Heater - Device Fault Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target_temperature Number:Temperature Heater - Target Temperature
countdown_time Number:Time Countdown - Countdown Time
temperature Number:Temperature Environment - Temperature
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
alarm Switch Alarm - Alarm
brightness Number Indicator Light - Brightness Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
hw_enable Switch Private Service - Hw Enable
use_time Number:Time Private Service - Use Time
country_code Number Private Service - Country Code Value mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]

# Smartmi Smart Fan (zhimi.heater.na1) Channels

Channel Type Description Comment
on Switch Heater - Power
fault Number Heater - Device Fault Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
heat_level Number Heater - Heat Level Value mapping ["1"="High","2"="Low"]
mode Number Heater - Mode Value mapping ["0"="Fan not swing","1"="Fan swing"]
alarm Switch Alarm - Alarm
countdown_time Number:Time Countdown - Countdown Time
brightness Number Indicator Light - Brightness Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
return_to_middle Switch Private Service - Return To Middle

# Smartmi Smart Fan Heater (zhimi.heater.nb1) Channels

Channel Type Description Comment
on Switch Heater - Power
fault Number Heater - Device Fault Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
heat_level Number Heater - Heat Level Value mapping ["1"="High","2"="Low"]
mode Number Heater - Mode Value mapping ["0"="Fan not swing","1"="Fan swing"]
target_temperature Number:Temperature Heater - Target Temperature
temperature Number:Temperature Environment - Temperature
alarm Switch Alarm - Alarm
countdown_time Number:Time Countdown - Countdown Time
brightness Number Indicator Light - Brightness Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical_controls_locked Switch Physical Control Locked - Physical Control Locked
return_to_middle Switch Private Service - Return To Middle
country_code Number Private Service - Country Code Value mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]
hw_en Switch Private Service - Hw En

# Smartmi Radiant Heater Smart Version (zhimi.heater.za1) Channels

Channel Type Description Comment
power Switch Power
target_temperature Number:Temperature Target Temperature
brightness Dimmer Brightness
buzzer Switch Buzzer Status
relative_humidity Number:Dimensionless Relative Humidity
childlock Switch Child Lock
HWSwitch Switch HW Switch
temperature Number:Temperature Temperature
usedhours Number:Time Run Time

# Smartmi Smart Convector Heater 1S (zhimi.heater.za2) Channels

Channel Type Description Comment
fault Number Heater - Device Fault Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
on Switch Heater - Power
target-temperature Number:Temperature Heater - Target Temperature
alarm Switch Alarm - Alarm
countdown-time Number:Time Countdown - Countdown Time
relative-humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
brightness Number Indicator Light - Brightness Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical-controls-locked Switch Physical Control Locked - Physical Controls Locked
use-time Number:Time Private-Service - Use Time

# Smartmi Smart Convector Heater 1S (zhimi.heater.zb1) Channels

Channel Type Description Comment
on Switch Heater - Power
fault Number Heater - Device Fault Value mapping ["0"="No Error","1"="NTC Connect Error","2"="High Temperature Alarm","3"="EEPROM Error","4"="Multi Errors"]
target-temperature Number:Temperature Heater - Target Temperature
alarm Switch Alarm - Alarm
countdown-time Number:Time Countdown - Countdown Time
relative-humidity Number:Dimensionless Environment - Relative Humidity
temperature Number:Temperature Environment - Temperature
brightness Number Indicator Light - Brightness Value mapping ["0"="Bright","1"="Dark","2"="Extinguished"]
physical-controls-locked Switch Physical Control Locked - Physical Controls Locked
use-time Number:Time Private-Service - Use Time
country-code Number Private-Service - Country-Code Value mapping ["0"="Unknown","1"="US","82"="KR","44"="EU","81"="JP","7"="RU","86"="CN","852"="HK","886"="TW","33"="FR"]

# Smartmi Evaporative Humidifier (zhimi.humidifier.ca1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode
humidity Number:Dimensionless Humidity
setHumidity Number Humidity Set
aqi Number Air Quality Index
translevel Number Trans_level
bright Dimmer LED Brightness
buzzer Switch Buzzer Status
depth Number Depth
dry Switch Dry
usedhours Number:Time Run Time
motorspeed Number Motor Speed
temperature Number:Temperature Temperature
childlock Switch Child Lock

# Smartmi Evaporative Humidifer 2 (zhimi.humidifier.ca4) Channels

Channel Type Description Comment
power Switch Power
mode Number Mode - Fan Level Value mapping ["0"="Auto","1"="Silent","2"="Normal","3"="Maximum"]
Fault Number Humidifier Device Fault
humidity Number:Dimensionless Humidity
targetHumidity Number:Dimensionless Target Humidity
waterlevel Number Water Level
bright Number LED Brightness Value mapping ["0"="Dark","1"="Dimmed","2"="Brightest"]
buzzer Switch Buzzer Status
dry Switch Dry
usedhours Number:Time Run Time
powerhours Number:Time Power Time
targetmotorspeed Number Target Motor Speed
actualmotorspeed Number Actual Motor Speed
temperature Number:Temperature Temperature
childlock Switch Child Lock
ButtonPressed Number Button Pressed Value mapping ["0"="none","1"="led","2"="power"]
clean Switch Clean Mode

# Smartmi Evaporative Humidifier (zhimi.humidifier.cb1) Channels

Channel Type Description Comment
power Switch Power
humidifierMode String Humidifier Mode
humidity Number:Dimensionless Humidity
setHumidity Number:Dimensionless Humidity Set
bright Dimmer LED Brightness
buzzer Switch Buzzer Status
depth Number Depth
dry Switch Dry
usedhours Number:Time Run Time
motorspeed Number Motor Speed
temperature Number:Temperature Temperature
childlock Switch Child Lock

# Smartmi Evaporative Humidifier (zhimi.humidifier.cb2) Channels

Channel Type Description Comment
power Switch Power
humidifierMode String Humidifier Mode
humidity Number:Dimensionless Humidity
setHumidity Number:Dimensionless Humidity Set
bright Dimmer LED Brightness
buzzer Switch Buzzer Status
depth Number Depth
dry Switch Dry
usedhours Number:Time Run Time
motorspeed Number Motor Speed
temperature Number:Temperature Temperature
childlock Switch Child Lock

# Smartmi Humidifier (zhimi.humidifier.v1) Channels

Channel Type Description Comment
power Switch Power
mode String Mode
humidity Number:Dimensionless Humidity
setHumidity Number Humidity Set
aqi Number Air Quality Index
translevel Number Trans_level
bright Dimmer LED Brightness
buzzer Switch Buzzer Status
depth Number Depth
dry Switch Dry
usedhours Number:Time Run Time
motorspeed Number Motor Speed
temperature Number:Temperature Temperature
childlock Switch Child Lock

# Mi Smart Power Strip (zimi.powerstrip.v2) Channels

Channel Type Description Comment
power Switch Power
powerUsage Number Power Consumption
led Switch wifi LED
power_price Number power_price
current Number Current
temperature Number:Temperature Temperature
lp_autooff Number Low Power Auto Off
lp_autooff_delay Number Low Power Limit Time
lp_threshold Number Low Power Threshold

# Example item file Rockrobo vacuum

Group  gVac     "Xiaomi Robot Vacuum"      <fan>
Group  gVacStat "Status Details"           <status> (gVac)
Group  gVacCons "Consumables Usage"        <line-increase> (gVac)
Group  gVacDND  "Do Not Disturb Settings"  <moon> (gVac)
Group  gVacHist "Cleaning History"         <calendar> (gVac)
Group  gVacLast "Last Cleaning Details"       <calendar> (gVac)

String actionControl  "Vacuum Control"          {channel="miio:vacuum:034F0E45:actions#control" }
String actionCommand  "Vacuum Command"          {channel="miio:vacuum:034F0E45:actions#commands" }

Number statusBat    "Battery Level [%1.0f%%]" <battery>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#battery" }
Number statusArea    "Cleaned Area [%1.0fm²]" <zoom>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#clean_area" }
Number statusTime    "Cleaning Time [%1.0f']" <clock>   (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#clean_time" }
String  statusError    "Error [%s]"  <error>  (gVac,gVacStat) {channel="miio:vacuum:034F0E45:status#error_code" }
Number statusFanPow    "Fan Power [%1.0f%%]"  <signal>   (gVacStat) {channel="miio:vacuum:034F0E45:status#fan_power" } 
Number statusClean    "In Cleaning Status [%1.0f]"   <switch>  (gVacStat) {channel="miio:vacuum:034F0E45:status#in_cleaning" }
Switch statusDND    "DND Activated"    (gVacStat) {channel="miio:vacuum:034F0E45:status#dnd_enabled" }
Number statusStatus    "Status [%1.0f]"  <status>  (gVacStat) {channel="miio:vacuum:034F0E45:status#state"} 
Switch isLocating    "Locating"    (gVacStat) {channel="miio:vacuum:034F0E45:status#is_locating" }

Number consumableMain    "Main Brush [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#main_brush_time"}
Number consumableSide    "Side Brush [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#side_brush_time"}
Number consumableFilter    "Filter Time[%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#filter_time" }
Number consumableSensor    "Sensor [%1.0f]"    (gVacCons) {channel="miio:vacuum:034F0E45:consumables#sensor_dirt_time"}

Switch dndFunction   "DND Function" <moon>   (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_function"}
String dndStart   "DND Start Time [%s]" <clock>   (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_start"}
String dndEnd   "DND End Time [%s]"   <clock-on>  (gVacDND) {channel="miio:vacuum:034F0E45:dnd#dnd_end"}

Number historyArea    "Total Cleaned Area [%1.0fm²]" <zoom>    (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_area"}
String historyTime    "Total Clean Time [%s]"   <clock>     (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_time"}
Number historyCount    "Total # Cleanings [%1.0f]"  <office>  (gVacHist) {channel="miio:vacuum:034F0E45:history#total_clean_count"}

String lastStart   "Last Cleaning Start time [%s]" <clock> (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_start_time"}
String lastEnd     "Last Cleaning End time [%s]" <clock> (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_end_time"}
Number lastArea    "Last Cleaned Area [%1.0fm²]" <zoom>    (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_area"}
Number lastTime    "Last Clean Time [%1.0f']"   <clock>     (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_duration"}
Number lastError    "Error [%s]"  <error>  (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_error" }
Switch lastCompleted  "Last Cleaning Completed"    (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#last_clean_finish" }

Image map "Cleaning Map" (gVacLast) {channel="miio:vacuum:034F0E45:cleaning#map"}

# Mi Air Frying Pan (careli.fryer.maf01) item file lines

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fryer "Mi Air Frying Pan" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Custom - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
String recipe_sync "Custom - Recipe Sync" (G_fryer) {channel="miio:basic:fryer:recipe_sync"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

# Mi Smart Air Fryer (3.5L) (careli.fryer.maf02) item file lines

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fryer "Mi Smart Air Fryer (3.5L)" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

# Mi Air Frying Pan (careli.fryer.maf03) item file lines

note: Autogenerated example. Replace the id (fryer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fryer "Mi Air Frying Pan" <status>
String actions "Actions" (G_fryer) {channel="miio:basic:fryer:actions"}
Number status "Air Fryer - Status" (G_fryer) {channel="miio:basic:fryer:status"}
Number fault "Air Fryer - Device Fault" (G_fryer) {channel="miio:basic:fryer:fault"}
Number:Time target_time "Air Fryer - Target Time" (G_fryer) {channel="miio:basic:fryer:target_time"}
Number:Temperature target_temperature "Air Fryer - Target Temperature" (G_fryer) {channel="miio:basic:fryer:target_temperature"}
Number:Time left_time "Air Fryer - Left Time" (G_fryer) {channel="miio:basic:fryer:left_time"}
String recipe_id "Custom - Recipe Id" (G_fryer) {channel="miio:basic:fryer:recipe_id"}
String recipe_name "Custom - Recipe Name" (G_fryer) {channel="miio:basic:fryer:recipe_name"}
Number:Time work_time "Custom - Work Time" (G_fryer) {channel="miio:basic:fryer:work_time"}
Number:Temperature work_temp "Custom - Work Temp" (G_fryer) {channel="miio:basic:fryer:work_temp"}
Number:Time appoint_time "Custom - Appoint Time" (G_fryer) {channel="miio:basic:fryer:appoint_time"}
Number food_quantity "Custom - Food Quantity" (G_fryer) {channel="miio:basic:fryer:food_quantity"}
Number preheat_switch "Custom - Preheat Switch" (G_fryer) {channel="miio:basic:fryer:preheat_switch"}
Number:Time appoint_time_left "Custom - Appoint Time Left" (G_fryer) {channel="miio:basic:fryer:appoint_time_left"}
String recipe_sync "Custom - Recipe Sync" (G_fryer) {channel="miio:basic:fryer:recipe_sync"}
Number turn_pot "Custom - Turn Pot" (G_fryer) {channel="miio:basic:fryer:turn_pot"}

# Qingping Air Monitor Lite (cgllc.airm.cgdn1) item file lines

note: Autogenerated example. Replace the id (airm) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airm "Qingping Air Monitor Lite" <status>
String actions "Actions" (G_airm) {channel="miio:basic:airm:actions"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airm) {channel="miio:basic:airm:relative_humidity"}
Number:Density pm2_5_density "Environment - PM2 5 Density" (G_airm) {channel="miio:basic:airm:pm2_5_density"}
Number:Density pm10_density "Environment - PM10 Density" (G_airm) {channel="miio:basic:airm:pm10_density"}
Number:Temperature temperature "Environment - Temperature" (G_airm) {channel="miio:basic:airm:temperature"}
Number:Density co2_density "Environment - CO2 Density" (G_airm) {channel="miio:basic:airm:co2_density"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_airm) {channel="miio:basic:airm:battery_level"}
Number charging_state "Battery - Charging State" (G_airm) {channel="miio:basic:airm:charging_state"}
Number:ElectricPotential voltage "Battery - Voltage" (G_airm) {channel="miio:basic:airm:voltage"}
String mac "Mac - Mac" (G_airm) {channel="miio:basic:airm:mac"}
Number:Time monitoring_frequency "Settings - Monitoring Frequency" (G_airm) {channel="miio:basic:airm:monitoring_frequency"}
Number:Time screen_off "Settings - Screen Off" (G_airm) {channel="miio:basic:airm:screen_off"}
Number:Time device_off "Settings - Device Off" (G_airm) {channel="miio:basic:airm:device_off"}
String tempature_unit "Settings - Tempature Unit" (G_airm) {channel="miio:basic:airm:tempature_unit"}

# Mi Multifunction Air Monitor (cgllc.airmonitor.b1) item file lines

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airmonitor "Mi Multifunction Air Monitor" <status>
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Number pm25 "PM2.5" (G_airmonitor) {channel="miio:basic:airmonitor:pm25"}
Number co2 "CO2e" (G_airmonitor) {channel="miio:basic:airmonitor:co2"}
Number tvoc "tVOC" (G_airmonitor) {channel="miio:basic:airmonitor:tvoc"}
Number:Dimensionless humidity "Humidity" (G_airmonitor) {channel="miio:basic:airmonitor:humidity"}
Number:Temperature temperature "Temperature" (G_airmonitor) {channel="miio:basic:airmonitor:temperature"}

# Qingping Air Monitor (cgllc.airmonitor.s1) item file lines

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airmonitor "Qingping Air Monitor" <status>
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Number pm25 "PM2.5" (G_airmonitor) {channel="miio:basic:airmonitor:pm25"}
Number co2 "CO2" (G_airmonitor) {channel="miio:basic:airmonitor:co2"}
Number tvoc "tVOC" (G_airmonitor) {channel="miio:basic:airmonitor:tvoc"}
Number:Dimensionless humidity "Humidity" (G_airmonitor) {channel="miio:basic:airmonitor:humidity"}
Number:Temperature temperature "Temperature" (G_airmonitor) {channel="miio:basic:airmonitor:temperature"}

# Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway) (chuangmi.plug.212a01) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Power Plug 2 (Wi-Fi and Bluetooth Gateway)" <status>
Switch on "Power" (G_plug) {channel="miio:basic:plug:on"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Number:Time working_time "Working Time" (G_plug) {channel="miio:basic:plug:working-time"}
Switch on1 "Indicator Light - Switch Status" (G_plug) {channel="miio:basic:plug:on1"}
Number:Energy power_consumption "Daily Power Consumption" (G_plug) {channel="miio:basic:plug:power-consumption"}
Number:Current electric_current "Power Consumption - Electric Current" (G_plug) {channel="miio:basic:plug:electric-current"}
Number:ElectricPotential voltage "Power Consumption - Voltage" (G_plug) {channel="miio:basic:plug:voltage"}
Number:Power electric_power "Current Power Consumption - Electric Power" (G_plug) {channel="miio:basic:plug:electric-power"}
Number:Time on_duration "Imilab Timer - On Duration" (G_plug) {channel="miio:basic:plug:on-duration"}
Number:Time off_duration "Imilab Timer - Off Duration" (G_plug) {channel="miio:basic:plug:off-duration"}
Number:Time countdown "Imilab Timer - Countdown" (G_plug) {channel="miio:basic:plug:countdown"}
Switch task_switch "Imilab Timer - Task Switch" (G_plug) {channel="miio:basic:plug:task-switch"}
Switch countdown_info "Imilab Timer - Countdown Info" (G_plug) {channel="miio:basic:plug:countdown-info"}
String bt_gw "BT Gateway" (G_plug) {channel="miio:basic:plug:bt-gw"}
String bt_gw_devices "Connected BT Gateway Devices" (G_plug) {channel="miio:basic:plug:bt-gw-devices"}

# Mi Smart Plug WiFi (chuangmi.plug.hmi205) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug WiFi" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator light" (G_plug) {channel="miio:basic:plug:led"}

# Mi Smart Plug (WiFi) (chuangmi.plug.hmi206) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug (WiFi)" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Wifi LED" (G_plug) {channel="miio:basic:plug:led"}

# Mi Smart Wi-Fi Plug (Bluetooth Gateway) (chuangmi.plug.hmi208) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Wi-Fi Plug (Bluetooth Gateway)" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Wifi LED" (G_plug) {channel="miio:basic:plug:led"}

# Mi Plug Mini (chuangmi.plug.m1) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Plug Mini" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator light" (G_plug) {channel="miio:basic:plug:led"}

# Mi Smart Plug (Wi-Fi) Basic (chuangmi.plug.m3) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug (Wi-Fi) Basic" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Indicator light" (G_plug) {channel="miio:basic:plug:led"}

# Mi Smart Power Plug (chuangmi.plug.v1) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Power Plug" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}

# Mi Smart Power Plug v2 (chuangmi.plug.v2) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Power Plug v2" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}

# MIJIA Smart Plug Enhanced (chuangmi.plug.v3) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "MIJIA Smart  Plug Enhanced" <status>
Switch power "Power" (G_plug) {channel="miio:basic:plug:power"}
Switch usb "USB" (G_plug) {channel="miio:basic:plug:usb"}
Number:Temperature temperature "Temperature" (G_plug) {channel="miio:basic:plug:temperature"}
Switch led "Wifi LED" (G_plug) {channel="miio:basic:plug:led"}

# Gosund Smart Plug (cuco.plug.cp1) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Gosund Smart Plug" <status>
String FirmwareRevision "Device Information-CurrentFirmware Version" (G_plug) {channel="miio:basic:plug:FirmwareRevision"}
String Manufacturer "Device Information-Device Manufacturer" (G_plug) {channel="miio:basic:plug:Manufacturer"}
String Model "Device Information-Device Model" (G_plug) {channel="miio:basic:plug:Model"}
String SerialNumber "Device Information-Device Serial Number" (G_plug) {channel="miio:basic:plug:SerialNumber"}
Switch On "Switch-Switch Status" (G_plug) {channel="miio:basic:plug:On"}

# Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Antibacterial Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless humidity_set "Humidity Setting" (G_humidifier) {channel="miio:basic:humidifier:humidity_set"}
Switch led "LED indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch sound "Notification Sounds" (G_humidifier) {channel="miio:basic:humidifier:sound"}
Number watertankstatus "Watertank Status" (G_humidifier) {channel="miio:basic:humidifier:watertankstatus"}

# Mi S Smart Humidifer (deerma.humidifier.jsq1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi S Smart Humidifer " <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless humidity_set "Humidity Setting" (G_humidifier) {channel="miio:basic:humidifier:humidity_set"}
Switch led "LED indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch sound "Notification Sounds" (G_humidifier) {channel="miio:basic:humidifier:sound"}
Number watertankstatus "Watertank Status" (G_humidifier) {channel="miio:basic:humidifier:watertankstatus"}
Switch wet_and_protect "Wet and Protect" (G_humidifier) {channel="miio:basic:humidifier:wet_and_protect"}

# Mi Smart Antibacterial Humidifier (deerma.humidifier.jsq5) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Antibacterial Humidifier" <status>
Switch on "Humidifier - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on"}
Number fault "Humidifier - Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Humidifier - Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Humidifier - Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_humidifier) {channel="miio:basic:humidifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch alarm "Alarm - Alarm" (G_humidifier) {channel="miio:basic:humidifier:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on1"}
Switch water_shortage_fault "Custom - Water Shortage Fault" (G_humidifier) {channel="miio:basic:humidifier:water_shortage_fault"}
Switch the_tank_filed "Custom - The Tank Filed" (G_humidifier) {channel="miio:basic:humidifier:the_tank_filed"}

# Mi Smart Humidifer S (deerma.humidifier.jsqs) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Humidifer S" <status>
Switch on "Humidifier - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on"}
Number fault "Humidifier - Device Fault" (G_humidifier) {channel="miio:basic:humidifier:fault"}
Number fan_level "Humidifier - Fan Level" (G_humidifier) {channel="miio:basic:humidifier:fan_level"}
Number:Dimensionless target_humidity "Humidifier - Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:target_humidity"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_humidifier) {channel="miio:basic:humidifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch alarm "Alarm - Alarm" (G_humidifier) {channel="miio:basic:humidifier:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_humidifier) {channel="miio:basic:humidifier:on1"}
Switch water_shortage_fault "Custom - Water Shortage Fault" (G_humidifier) {channel="miio:basic:humidifier:water_shortage_fault"}
Switch the_tank_filed "Custom - The Tank Filed" (G_humidifier) {channel="miio:basic:humidifier:the_tank_filed"}

# Mi Smart Humidifier (deerma.humidifier.mjjsq) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Mi Smart Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless humidity_set "Humidity Setting" (G_humidifier) {channel="miio:basic:humidifier:humidity_set"}
Switch led "LED indicator Light" (G_humidifier) {channel="miio:basic:humidifier:led"}
Switch sound "Notification Sounds" (G_humidifier) {channel="miio:basic:humidifier:sound"}
Number watertankstatus "Watertank Status" (G_humidifier) {channel="miio:basic:humidifier:watertankstatus"}

# Mi Fresh Air Ventilator A1-150 (dmaker.airfresh.a1) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Mi Fresh Air Ventilator A1-150" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
String airFreshMode "Mode" (G_airfresh) {channel="miio:basic:airfresh:airFreshMode"}
Switch airFreshPTCPower "PTC" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCPower"}
Switch airFreshPTCStatus "PTC Status" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCStatus"}
Switch airFreshDisplay "Display" (G_airfresh) {channel="miio:basic:airfresh:airFreshDisplay"}
Switch airFreshChildLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:airFreshChildLock"}
Switch airFreshSound "Sound" (G_airfresh) {channel="miio:basic:airfresh:airFreshSound"}
Number airFreshPM25 "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:airFreshPM25"}
Number airFreshCO2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:airFreshCO2"}
Number airFreshCurrentSpeed "Current Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshCurrentSpeed"}
Number airFreshFavoriteSpeed "Favorite Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshFavoriteSpeed"}
Number airFreshTemperature "Temperature Outside" (G_airfresh) {channel="miio:basic:airfresh:airFreshTemperature"}
Number airFreshFilterPercents "Filter Percents Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterPercents"}
Number airFreshFilterDays "Filter Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterDays"}
String airFreshResetFilterA1 "Reset Filter" (G_airfresh) {channel="miio:basic:airfresh:airFreshResetFilterA1"}

# Mi Fresh Air Ventilator (dmaker.airfresh.t2017) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Mi Fresh Air Ventilator" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
String airFreshMode "Mode" (G_airfresh) {channel="miio:basic:airfresh:airFreshMode"}
Switch airFreshPTCPower "PTC" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCPower"}
String airFreshPtcLevel "PTC Level" (G_airfresh) {channel="miio:basic:airfresh:airFreshPtcLevel"}
Switch airFreshPTCStatus "PTC Status" (G_airfresh) {channel="miio:basic:airfresh:airFreshPTCStatus"}
String airFreshDisplayDirection "Screen direction" (G_airfresh) {channel="miio:basic:airfresh:airFreshDisplayDirection"}
Switch airFreshDisplay "Display" (G_airfresh) {channel="miio:basic:airfresh:airFreshDisplay"}
Switch airFreshChildLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:airFreshChildLock"}
Switch airFreshSound "Sound" (G_airfresh) {channel="miio:basic:airfresh:airFreshSound"}
Number airFreshPM25 "PM2.5" (G_airfresh) {channel="miio:basic:airfresh:airFreshPM25"}
Number airFreshCO2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:airFreshCO2"}
Number airFreshCurrentSpeed "Current Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshCurrentSpeed"}
Number airFreshFavoriteSpeed "Favorite Speed" (G_airfresh) {channel="miio:basic:airfresh:airFreshFavoriteSpeed"}
Number airFreshTemperature "Temperature Outside" (G_airfresh) {channel="miio:basic:airfresh:airFreshTemperature"}
Number airFreshFilterPercents "Filter Percents Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterPercents"}
Number airFreshFilterDays "Filter Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterDays"}
Number airFreshFilterProPercents "Filter Pro Percents Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterProPercents"}
Number airFreshFilterProDays "Filter Pro Days Remaining" (G_airfresh) {channel="miio:basic:airfresh:airFreshFilterProDays"}
String airFreshResetFilter "Reset Filter" (G_airfresh) {channel="miio:basic:airfresh:airFreshResetFilter"}

# Mi Smart Standing Fan 2 Lite (dmaker.fan.1c) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 2 Lite" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Number:Time OffDelayTime "Fan-Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

# Mi Smart Standing Fan 1X (dmaker.fan.p5) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 1X" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch roll "Rotation" (G_fan) {channel="miio:basic:fan:roll"}
Number mode "Mode" (G_fan) {channel="miio:basic:fan:mode"}
Number angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number timer "Timer" (G_fan) {channel="miio:basic:fan:timer"}
Switch beep "Beep Sound" (G_fan) {channel="miio:basic:fan:beep"}
Number light "Light" (G_fan) {channel="miio:basic:fan:light"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}

# Mi Smart Standing Fan 1C (dmaker.fan.p8) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 1C" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Number:Time OffDelayTime "Fan-Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

# Mi Smart Tower Fan (dmaker.fan.p9) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Tower Fan" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan-Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number HorizontalAngle "Fan-Horizontal Angle" (G_fan) {channel="miio:basic:fan:HorizontalAngle"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Number:Time OffDelayTime "Fan - Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Number MotorControl "Fan-Motor Control" (G_fan) {channel="miio:basic:fan:MotorControl"}
Number SpeedLevel "Fan-Speed Level" (G_fan) {channel="miio:basic:fan:SpeedLevel"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

# Mi Smart Standing Fan 2 (dmaker.fan.p10) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 2" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch On "Fan-Switch Status" (G_fan) {channel="miio:basic:fan:On"}
Number FanLevel "Fan-Fan Level" (G_fan) {channel="miio:basic:fan:FanLevel"}
Number Mode "Fan-Mode" (G_fan) {channel="miio:basic:fan:Mode"}
Switch HorizontalSwing "Fan-Horizontal Swing" (G_fan) {channel="miio:basic:fan:HorizontalSwing"}
Number HorizontalAngle "Fan-Horizontal Angle" (G_fan) {channel="miio:basic:fan:HorizontalAngle"}
Switch Alarm "Fan-Alarm" (G_fan) {channel="miio:basic:fan:Alarm"}
Number:Time OffDelayTime "Fan - Power Off Delay Time" (G_fan) {channel="miio:basic:fan:OffDelayTime"}
Switch Brightness "Fan-Brightness" (G_fan) {channel="miio:basic:fan:Brightness"}
Number MotorControl "Fan-Motor Control" (G_fan) {channel="miio:basic:fan:MotorControl"}
Number SpeedLevel "Fan-Speed Level" (G_fan) {channel="miio:basic:fan:SpeedLevel"}
Switch PhysicalControlsLocked "Physical Control Locked-Physical Control Locked" (G_fan) {channel="miio:basic:fan:PhysicalControlsLocked"}

# Mi Smart Standing Fan Pro (dmaker.fan.p15) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan Pro" <status>
Switch on "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:on"}
Number fan_level "Fan - Gear Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Fan - Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Fan - Horizontal Swing" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number horizontal_angle "Fan - Horizontal Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
Number status "Fan - Status" (G_fan) {channel="miio:basic:fan:status"}
Switch on1 "Indicator Light - Switch Status" (G_fan) {channel="miio:basic:fan:on1"}
Switch alarm "Alarm - Alarm" (G_fan) {channel="miio:basic:fan:alarm"}
Number fault "Motor Controller - Device Fault" (G_fan) {channel="miio:basic:fan:fault"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Number:Time off_delay_time "Off Delay Time - Off Delay Time" (G_fan) {channel="miio:basic:fan:off_delay_time"}
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}

# Mi Smart Standing Fan 2 (dmaker.fan.p18) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Standing Fan 2" <status>
String actions "Actions" (G_fan) {channel="miio:basic:fan:actions"}
Switch on "Fan - Switch Status" (G_fan) {channel="miio:basic:fan:on"}
Number fan_level "Fan - Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Number mode "Fan - Mode" (G_fan) {channel="miio:basic:fan:mode"}
Switch horizontal_swing "Fan - Horizontal Swing" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number horizontal_angle "Fan - Horizontal Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
Number:Time off_delay_time "Fan - Power Off Delay Time" (G_fan) {channel="miio:basic:fan:off_delay_time"}
Switch brightness "Fan - Brightness" (G_fan) {channel="miio:basic:fan:brightness"}
Switch alarm "Fan - Alarm" (G_fan) {channel="miio:basic:fan:alarm"}
Number motor_control "Fan - Motor Control" (G_fan) {channel="miio:basic:fan:motor_control"}
Number speed_level "Fan - Speed Level" (G_fan) {channel="miio:basic:fan:speed_level"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}

# Mi Robot Vacuum Mop 1C STYTJ01ZHM (dreame.vacuum.mc1808) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum Mop 1C STYTJ01ZHM" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number BatteryLevel "Battery-Battery Level" (G_vacuum) {channel="miio:basic:vacuum:BatteryLevel"}
Number ChargingState "Battery-Charging State" (G_vacuum) {channel="miio:basic:vacuum:ChargingState"}
Number water_mode "Water Mode" (G_vacuum) {channel="miio:basic:vacuum:water-mode"}
Number Fault "Robot Cleaner-Device Fault" (G_vacuum) {channel="miio:basic:vacuum:Fault"}
Number Status "Robot Cleaner-Status" (G_vacuum) {channel="miio:basic:vacuum:Status"}
Number:Time BrushLeftTime "Main Cleaning Brush-Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime"}
Number:Dimensionless BrushLifeLevel "Main Cleaning Brush-Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel"}
Number:Dimensionless FilterLifeLevel "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:FilterLifeLevel"}
Number:Time FilterLeftTime "Filter-Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:FilterLeftTime"}
Number:Time BrushLeftTime1 "Side Cleaning Brush-Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:BrushLeftTime1"}
Number:Dimensionless BrushLifeLevel1 "Side Cleaning Brush-Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:BrushLifeLevel1"}
Number WorkMode "clean-workmode" (G_vacuum) {channel="miio:basic:vacuum:WorkMode"}
String Area "clean-area" (G_vacuum) {channel="miio:basic:vacuum:Area"}
String Timer "clean-timer" (G_vacuum) {channel="miio:basic:vacuum:Timer"}
Number Mode "clean-mode" (G_vacuum) {channel="miio:basic:vacuum:Mode"}
Number:Time TotalCleanTime "Clean - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTime"}
Number TotalCleanTimes "Clean - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanTimes"}
Number:Area TotalCleanArea "Clean - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:TotalCleanArea"}
Number CleanLogStartTime "Clean - Clean Log Start Time" (G_vacuum) {channel="miio:basic:vacuum:CleanLogStartTime"}
Number ButtonLed "Clean - Button Led" (G_vacuum) {channel="miio:basic:vacuum:ButtonLed"}
Number TaskDone "Clean - Task Done" (G_vacuum) {channel="miio:basic:vacuum:TaskDone"}
String LifeSieve "Consumable - Life Sieve" (G_vacuum) {channel="miio:basic:vacuum:LifeSieve"}
String LifeBrushSide "Consumable - Life Brush Side" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushSide"}
String LifeBrushMain "Consumable - Life Brush Main" (G_vacuum) {channel="miio:basic:vacuum:LifeBrushMain"}
Switch Enable "Annoy - Enable" (G_vacuum) {channel="miio:basic:vacuum:Enable"}
String StartTime "Annoy - Start Time" (G_vacuum) {channel="miio:basic:vacuum:StartTime"}
String StopTime "Annoy - Stop Time" (G_vacuum) {channel="miio:basic:vacuum:StopTime"}
String MapView "Map - Map View" (G_vacuum) {channel="miio:basic:vacuum:MapView"}
Number Volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:Volume"}
String VoicePackets "Audio - Voice Packets" (G_vacuum) {channel="miio:basic:vacuum:VoicePackets"}
String TimeZone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:TimeZone"}

# Dreame Robot Vacuum-Mop F9 (dreame.vacuum.p2008) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Robot Vacuum-Mop F9" <status>
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}
Number save_map_status "Vslam Extend - Save Map Status" (G_vacuum) {channel="miio:basic:vacuum:save-map-status"}

# Dreame Robot Vacuum D9 (dreame.vacuum.p2009) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Robot Vacuum D9 " <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Consumables Reset" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}

# Dreame Bot W10 (dreame.vacuum.p2027) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Bot W10" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
String clean_extend_data "Vacuum Extend - Clean Extend Data" (G_vacuum) {channel="miio:basic:vacuum:clean_extend_data"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String remote_state "Vacuum Extend - Remote State" (G_vacuum) {channel="miio:basic:vacuum:remote_state"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Number mop_status "Vacuum Extend - Mop Status" (G_vacuum) {channel="miio:basic:vacuum:mop_status"}
Number child_lock "Vacuum Extend - Child Lock" (G_vacuum) {channel="miio:basic:vacuum:child_lock"}
Number clean_cancel "Vacuum Extend - Clean Cancel" (G_vacuum) {channel="miio:basic:vacuum:clean_cancel"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
String frame_info "Map - Frame Info" (G_vacuum) {channel="miio:basic:vacuum:frame_info"}
String map_extend_data "Map - Map Extend Data" (G_vacuum) {channel="miio:basic:vacuum:map_extend_data"}
Number mult_map_state "Map - Mult Map State" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
String mult_map_info "Map - Mult Map Info" (G_vacuum) {channel="miio:basic:vacuum:mult_map_info"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String set_voice "Audio - Set Voice" (G_vacuum) {channel="miio:basic:vacuum:set_voice"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

# Dreame Bot Z10 Pro (dreame.vacuum.p2028) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Bot Z10 Pro" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
String clean_extend_data "Vacuum Extend - Clean Extend Data" (G_vacuum) {channel="miio:basic:vacuum:clean_extend_data"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String remote_state "Vacuum Extend - Remote State" (G_vacuum) {channel="miio:basic:vacuum:remote_state"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
String nation_matched "Vacuum Extend - Nation Matched" (G_vacuum) {channel="miio:basic:vacuum:nation_matched"}
Number relocation_status "Vacuum Extend - Relocation Status" (G_vacuum) {channel="miio:basic:vacuum:relocation_status"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
String frame_info "Map - Frame Info" (G_vacuum) {channel="miio:basic:vacuum:frame_info"}
String map_extend_data "Map - Map Extend Data" (G_vacuum) {channel="miio:basic:vacuum:map_extend_data"}
Number mult_map_state "Map - Mult Map State" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
String mult_map_info "Map - Mult Map Info" (G_vacuum) {channel="miio:basic:vacuum:mult_map_info"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String set_voice "Audio - Set Voice" (G_vacuum) {channel="miio:basic:vacuum:set_voice"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number auto_collect "Collect Dust - Auto Collect" (G_vacuum) {channel="miio:basic:vacuum:auto_collect"}
Number clean_times "Collect Dust - Clean Times" (G_vacuum) {channel="miio:basic:vacuum:clean_times"}
Number dust_enable "Collect Dust - Dust Enable" (G_vacuum) {channel="miio:basic:vacuum:dust_enable"}

# Trouver Robot LDS Vacuum-Mop Finder (dreame.vacuum.p2036) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Trouver Robot LDS Vacuum-Mop Finder" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Consumables Reset" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}

# Mi Robot Vacuum-Mop 2 Pro+ (dreame.vacuum.p2041o) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop 2 Pro+" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number save_map_status "Vslam Extend - Save Map Status" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

# MOVA Z500 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2156o) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "MOVA Z500 Robot Vacuum and Mop Cleaner" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String serial_number "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial_number"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}
Number save_map_status "Vslam Extend - Save Map Status" (G_vacuum) {channel="miio:basic:vacuum:save_map_status"}

# MOVA L600 Robot Vacuum and Mop Cleaner (dreame.vacuum.p2157) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "MOVA L600 Robot Vacuum and Mop Cleaner" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
String resetConsumable "Consumables Reset" (G_vacuum) {channel="miio:basic:vacuum:resetConsumable"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter-life-level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work-mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning-time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning-area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning-mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop-mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox-status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task-status"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break-point-restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet-press"}
String serial_number1 "Vacuum Extend - Serial Number" (G_vacuum) {channel="miio:basic:vacuum:serial-number1"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean-rags-tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep-sweeper-time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start-time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end-time"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice-packet-id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice-change-state"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer-clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first-clean-time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total-clean-times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}

# Dreame Bot D9 Max (dreame.vacuum.p2259) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Dreame Bot D9 Max" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Time brush_left_time "Main Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Main Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Side Cleaning Brush - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Side Cleaning Brush - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number work_mode "Vacuum Extend - Work Mode" (G_vacuum) {channel="miio:basic:vacuum:work_mode"}
Number:Time cleaning_time "Vacuum Extend - Cleaning Time" (G_vacuum) {channel="miio:basic:vacuum:cleaning_time"}
Number:Area cleaning_area "Vacuum Extend - Cleaning Area" (G_vacuum) {channel="miio:basic:vacuum:cleaning_area"}
Number cleaning_mode "Vacuum Extend - Cleaning Mode" (G_vacuum) {channel="miio:basic:vacuum:cleaning_mode"}
Number mop_mode "Vacuum Extend - Mop Mode" (G_vacuum) {channel="miio:basic:vacuum:mop_mode"}
Number waterbox_status "Vacuum Extend - Waterbox Status" (G_vacuum) {channel="miio:basic:vacuum:waterbox_status"}
Number task_status "Vacuum Extend - Task Status" (G_vacuum) {channel="miio:basic:vacuum:task_status"}
String clean_extend_data "Vacuum Extend - Clean Extend Data" (G_vacuum) {channel="miio:basic:vacuum:clean_extend_data"}
Number break_point_restart "Vacuum Extend - Break Point Restart" (G_vacuum) {channel="miio:basic:vacuum:break_point_restart"}
Number carpet_press "Vacuum Extend - Carpet Press" (G_vacuum) {channel="miio:basic:vacuum:carpet_press"}
String remote_state "Vacuum Extend - Remote State" (G_vacuum) {channel="miio:basic:vacuum:remote_state"}
Number:Time clean_rags_tip "Vacuum Extend - Clean Rags Tip" (G_vacuum) {channel="miio:basic:vacuum:clean_rags_tip"}
Number:Time keep_sweeper_time "Vacuum Extend - Keep Sweeper Time" (G_vacuum) {channel="miio:basic:vacuum:keep_sweeper_time"}
String faults "Vacuum Extend - Faults" (G_vacuum) {channel="miio:basic:vacuum:faults"}
Switch enable "Do Not Disturb - Enable" (G_vacuum) {channel="miio:basic:vacuum:enable"}
String start_time "Do Not Disturb - Start Time" (G_vacuum) {channel="miio:basic:vacuum:start_time"}
String end_time "Do Not Disturb - End Time" (G_vacuum) {channel="miio:basic:vacuum:end_time"}
String frame_info "Map - Frame Info" (G_vacuum) {channel="miio:basic:vacuum:frame_info"}
String map_extend_data "Map - Map Extend Data" (G_vacuum) {channel="miio:basic:vacuum:map_extend_data"}
Number mult_map_state "Map - Mult Map State" (G_vacuum) {channel="miio:basic:vacuum:mult_map_state"}
String mult_map_info "Map - Mult Map Info" (G_vacuum) {channel="miio:basic:vacuum:mult_map_info"}
Number:Dimensionless volume "Audio - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
String voice_packet_id "Audio - Voice Packet Id" (G_vacuum) {channel="miio:basic:vacuum:voice_packet_id"}
String voice_change_state "Audio - Voice Change State" (G_vacuum) {channel="miio:basic:vacuum:voice_change_state"}
String set_voice "Audio - Set Voice" (G_vacuum) {channel="miio:basic:vacuum:set_voice"}
String time_zone "Time - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time_zone"}
String timer_clean "Time - Timer Clean" (G_vacuum) {channel="miio:basic:vacuum:timer_clean"}
Number first_clean_time "Clean Logs - First Clean Time" (G_vacuum) {channel="miio:basic:vacuum:first_clean_time"}
Number:Time total_clean_time "Clean Logs - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_times "Clean Logs - Total Clean Times" (G_vacuum) {channel="miio:basic:vacuum:total_clean_times"}
Number total_clean_area "Clean Logs - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total_clean_area"}

# HUIZUO ARIES For Bedroom (huayi.light.ari013) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO ARIES For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO ARIES For Living Room (huayi.light.aries) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO ARIES For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO Fan Light (huayi.light.fanwy) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Fan Light" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}
Switch on1 "Fan - Power" (G_light) {channel="miio:basic:light:on1"}
Number:Dimensionless fan_level "Fan - Fan Level" (G_light) {channel="miio:basic:light:fan-level"}
Switch motor_reverse "Fan - Motor Reverse" (G_light) {channel="miio:basic:light:motor-reverse"}
Number mode "Fan - Mode" (G_light) {channel="miio:basic:light:mode"}

# HUIZUO Fan Light(2020) (huayi.light.fanwy2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Fan Light(2020)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}
Switch on1 "Fan - Power" (G_light) {channel="miio:basic:light:on1"}
Number:Dimensionless fan_level "Fan - Fan Level" (G_light) {channel="miio:basic:light:fan-level"}
Number mode "Fan - Mode" (G_light) {channel="miio:basic:light:mode"}
Number:Time time_off "Presets - Time Off" (G_light) {channel="miio:basic:light:time-off"}
Number:Temperature pre_colortemp "Presets - Pre Colortemp" (G_light) {channel="miio:basic:light:pre-colortemp"}
Dimmer pre_brightness "Presets - Pre Brightness" (G_light) {channel="miio:basic:light:pre-brightness"}
Number:Dimensionless pre_speed "Presets - Pre Speed" (G_light) {channel="miio:basic:light:pre-speed"}
Number reversal "Presets - Reversal" (G_light) {channel="miio:basic:light:reversal"}
Number pre_custom "Presets - Pre Custom" (G_light) {channel="miio:basic:light:pre-custom"}
Switch flabellum "Presets - Flabellum" (G_light) {channel="miio:basic:light:flabellum"}

# HUIZUO PEGASUS For Living Room (huayi.light.peg091) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PEGASUS For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO PEGASUS For Bedroom (huayi.light.peg093) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PEGASUS For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO PISCES For Bedroom (huayi.light.pis123) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PISCES For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO PISCES For Living Room (huayi.light.pisces) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO PISCES For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO TAURUS For Bedroom (huayi.light.tau023) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO TAURUS For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO TAURUS For Living Room (huayi.light.taurus) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO TAURUS For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO VIRGO For Bedroom (huayi.light.vir063) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO VIRGO For Bedroom" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO VIRGO For Living Room (huayi.light.virgo) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO VIRGO For Living Room" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO Ceiling Light (huayi.light.wy) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Ceiling Light" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO LIANGCHEN(BLE Mesh) (huayi.light.wy200) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO LIANGCHEN(BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO SAG Downlight (BLE Mesh) (huayi.light.wy201) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO SAG Downlight (BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO Bulb (BLE Mesh) (huayi.light.wy202) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Bulb (BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO YONG Downlight (BLE Mesh) (huayi.light.wy203) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO YONG Downlight (BLE Mesh)" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# huayi.light.wy204 (huayi.light.wy204) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "huayi.light.wy204" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# HUIZUO Heating Lamp (huayi.light.wyheat) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO Heating Lamp" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}
Switch on1 "Heater - Power" (G_light) {channel="miio:basic:light:on1"}
Number fault "Heater - Device Fault" (G_light) {channel="miio:basic:light:fault"}
Number heat_level "Heater - Heat Level" (G_light) {channel="miio:basic:light:heat-level"}
Switch screenshow "Other - Screenshow" (G_light) {channel="miio:basic:light:screenshow"}

# HUIZUO ZIWEI Ceiling Lamp (huayi.light.zw131) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "HUIZUO ZIWEI Ceiling Lamp" <status>
Switch on "Light - Power" (G_light) {channel="miio:basic:light:on"}
Dimmer brightness "Light - Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Temperature color_temperature "Light - Color Temperature" (G_light) {channel="miio:basic:light:color-temperature"}

# IKEA E27 white spectrum opal (ikea.light.led1545g12) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E27 white spectrum opal" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# IKEA E27 white spectrum clear (ikea.light.led1546g12) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E27 white spectrum clear" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# IKEA E14 white spectrum (ikea.light.led1536g5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E14 white spectrum" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# IKEA GU10 white spectrum (ikea.light.led1537r6) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA GU10 white spectrum" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# IKEA E27 warm white (ikea.light.led1623g12) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E27 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# IKEA GU10 warm white (ikea.light.led1650r5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA GU10 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# IKEA E14 warm white (ikea.light.led1649c5) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "IKEA E14 warm white" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# Xiaomiyoupin Curtain Controller (Wi-Fi) (lumi.curtain.hagl05) item file lines

note: Autogenerated example. Replace the id (curtain) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_curtain "Xiaomiyoupin Curtain Controller (Wi-Fi)" <status>
Number fault "Curtain - Device Fault" (G_curtain) {channel="miio:basic:curtain:fault"}
Number motor_control "Curtain - Motor Control" (G_curtain) {channel="miio:basic:curtain:motor_control"}
Number:Dimensionless current_position "Curtain - Current Position" (G_curtain) {channel="miio:basic:curtain:current-position"}
Number status "Curtain - Status" (G_curtain) {channel="miio:basic:curtain:status"}
Number:Dimensionless target_position "Curtain - Target Position" (G_curtain) {channel="miio:basic:curtain:target-position"}
Number manual_enabled "curtain_cfg - Manual Enabled" (G_curtain) {channel="miio:basic:curtain:manual-enabled"}
Number polarity "Curtain_cfg - Polarity" (G_curtain) {channel="miio:basic:curtain:polarity"}
Number pos_limit "curtain_cfg - Position Limit" (G_curtain) {channel="miio:basic:curtain:pos-limit"}
Number en_night_tip_light "Curtain_cfg - En_night_tip_light" (G_curtain) {channel="miio:basic:curtain:en_night_tip_light"}
Number run_time "Curtain_cfg - Run-time" (G_curtain) {channel="miio:basic:curtain:run-time"}
Number adjust_value "Motor_controller - Adjust_value" (G_curtain) {channel="miio:basic:curtain:adjust_value"}

# Mi Air Purifier virtual (lumi.gateway.mgl03) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi Air Purifier virtual" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

# Mi smart Home Gateway Hub (lumi.gateway.mieu01) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home Gateway Hub" <status>
Switch guard "Guard" (G_gateway) {channel="miio:gateway:gateway:guard"}
Switch corridor "Automatic Night Light" (G_gateway) {channel="miio:gateway:gateway:corridor"}
Color nightlight "Night Light" (G_gateway) {channel="miio:gateway:gateway:nightlight"}
Color rgb "Colored Light" (G_gateway) {channel="miio:gateway:gateway:rgb"}
Number doorbell_volume "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbell_volume"}
Number alarming_volume "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarming_volume"}
Number gateway_volume "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gateway_volume"}
Number:Time arming_time "Arming Time" (G_gateway) {channel="miio:gateway:gateway:arming_time"}
Number:Time corridor_on_time "Corridor on time" (G_gateway) {channel="miio:gateway:gateway:corridor_on_time"}
String language "Voice prompt Language" (G_gateway) {channel="miio:gateway:gateway:language"}
String zigbee_channel "Zigbee Channel" (G_gateway) {channel="miio:gateway:gateway:zigbee_channel"}
String lumi_bind "Lumi_bind info" (G_gateway) {channel="miio:gateway:gateway:lumi_bind"}
String doorbell_push "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbell_push"}

# Mi smart Home Gateway Hub v1 (lumi.gateway.v1) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home Gateway Hub v1" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

# Mi smart Home GatewayHub v2 (lumi.gateway.v2) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home GatewayHub v2" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

# Mi smart Home Gateway Hub v3 (lumi.gateway.v3) item file lines

note: Autogenerated example. Replace the id (gateway) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_gateway "Mi smart Home Gateway Hub v3" <status>
Switch telnetEnable "Enable Telnet" (G_gateway) {channel="miio:gateway:gateway:telnetEnable"}
Number doorbellVol "Doorbell Volume" (G_gateway) {channel="miio:gateway:gateway:doorbellVol"}
Number gatewayVol "Gateway Volume" (G_gateway) {channel="miio:gateway:gateway:gatewayVol"}
Number alarmingVol "Alarming Volume" (G_gateway) {channel="miio:gateway:gateway:alarmingVol"}
String doorbellPush "Doorbell Push" (G_gateway) {channel="miio:gateway:gateway:doorbellPush"}

# Aqara LED Light Bulb (Tunable White) (lumi.light.aqcn02) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Aqara LED Light Bulb (Tunable White)" <status>
Switch power "Power" (G_light) {channel="miio:lumi:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:lumi:light:brightness"}
Number colour_temperature "Color Temperature" (G_light) {channel="miio:lumi:light:colour_temperature"}

# Door lock (lumi.lock.v1) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Door lock" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

# Aqara Door Lock (lumi.lock.aq1) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Aqara Door Lock" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

# Aqara Door Lock S2 (lumi.lock.acn02) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Aqara Door Lock S2" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

# Aqara Door lock S2 Pro (lumi.lock.acn03) item file lines

note: Autogenerated example. Replace the id (lock) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_lock "Aqara Door lock S2 Pro" <status>
String status "Status" (G_lock) {channel="miio:lumi:lock:status"}
String log "Device Log" (G_lock) {channel="miio:lumi:lock:log"}

# Mi Smart Plug (Zigbee) (lumi.plug.mmeu01) item file lines

note: Autogenerated example. Replace the id (plug) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_plug "Mi Smart Plug (Zigbee)" <status>
Switch power "Power" (G_plug) {channel="miio:lumi:plug:power"}
Number load_power "Load Power" (G_plug) {channel="miio:lumi:plug:load_power"}
Switch en_night_tip_light "Led Light" (G_plug) {channel="miio:lumi:plug:en_night_tip_light"}
Switch poweroff_memory "Poweroff Memory" (G_plug) {channel="miio:lumi:plug:poweroff_memory"}
Number max_power "Max Power" (G_plug) {channel="miio:lumi:plug:max_power"}
String log "Device Log" (G_plug) {channel="miio:lumi:plug:log"}

# Mi Window and Door Sensor (lumi.sensor_magnet.v2) item file lines

note: Autogenerated example. Replace the id (sensor_magnet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_magnet "Mi Window and Door Sensor" <status>
String log "Device Log" (G_sensor_magnet) {channel="miio:lumi:sensor_magnet:log"}

# Mi Motion Sensor (lumi.sensor_motion.aq2) item file lines

note: Autogenerated example. Replace the id (sensor_motion) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_motion "Mi Motion Sensor" <status>
String log "Device Log" (G_sensor_motion) {channel="miio:lumi:sensor_motion:log"}

# Mi Motion Sensor (lumi.sensor_motion.v2) item file lines

note: Autogenerated example. Replace the id (sensor_motion) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_motion "Mi Motion Sensor" <status>
String log "Device Log" (G_sensor_motion) {channel="miio:lumi:sensor_motion:log"}

# Mi Temperature and Humidity Sensor (lumi.sensor_ht.v1) item file lines

note: Autogenerated example. Replace the id (sensor_ht) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_ht "Mi Temperature and Humidity Sensor" <status>
Number:Temperature temperature "Temperature" (G_sensor_ht) {channel="miio:lumi:sensor_ht:temperature"}
Number:Dimensionless humidity "Humidity" (G_sensor_ht) {channel="miio:lumi:sensor_ht:humidity"}

# Water Leak Sensor (lumi.sensor_wleak.aq1) item file lines

note: Autogenerated example. Replace the id (sensor_wleak) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_sensor_wleak "Water Leak Sensor" <status>
Switch leak "Leaking" (G_sensor_wleak) {channel="miio:lumi:sensor_wleak:leak"}
String log "Device Log" (G_sensor_wleak) {channel="miio:lumi:sensor_wleak:log"}

# Aqara Temperature and Humidity Sensor (lumi.weather.v1) item file lines

note: Autogenerated example. Replace the id (weather) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_weather "Aqara Temperature and Humidity Sensor" <status>
Number:Temperature temperature "Temperature" (G_weather) {channel="miio:lumi:weather:temperature"}
Number:Dimensionless humidity "Humidity" (G_weather) {channel="miio:lumi:weather:humidity"}
Number:Pressure pressure "pressure" (G_weather) {channel="miio:lumi:weather:pressure"}

# Mi Robot Vacuum-Mop Essential (mijia.vacuum.v2) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop Essential" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number target_water_level "Robot Cleaner - Target Water Level" (G_vacuum) {channel="miio:basic:vacuum:target-water-level"}
Number fan_level "Robot Cleaner - Fan Level" (G_vacuum) {channel="miio:basic:vacuum:fan-level"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging-state"}
Switch alarm "Alarm - Alarm" (G_vacuum) {channel="miio:basic:vacuum:alarm"}
Number:Dimensionless volume "Alarm - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter-left-time"}
Number:Dimensionless brush_life_level "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level"}
Number:Time brush_left_time "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time"}
Number:Dimensionless brush_life_level1 "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush-life-level1"}
Number:Time brush_left_time1 "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush-left-time1"}
Number direction_key "Remote Control - Direction Key" (G_vacuum) {channel="miio:basic:vacuum:direction_key"}
Number:Area clean_area "Clean Record - Clean Area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
Number clean_time "Clean Record - Clean Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Number:Area total_clean_area "Clean Record - Total Clean Area" (G_vacuum) {channel="miio:basic:vacuum:total-clean-area"}
Number total_clean_time "Clean Record - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total-clean-time"}
Number total_clean_count "Clean Record - Total Clean Count" (G_vacuum) {channel="miio:basic:vacuum:total-clean-count"}
Number language "Language - Language" (G_vacuum) {channel="miio:basic:vacuum:language"}
Switch not_disturb_switch "Language - Not Disturb Switch" (G_vacuum) {channel="miio:basic:vacuum:not-disturb-switch"}
Number mop_status "Other Status - Mop Status" (G_vacuum) {channel="miio:basic:vacuum:mop-status"}

# Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s1) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}

# Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s2) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}
Switch pump_block_flag "No Water Flag - Pump Block Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump-block-flag"}

# Mijia Smart Pet Water Dispenser (mmgg.pet_waterer.s3) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "Mijia Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}
Switch pump_block_flag "No Water Flag - Pump Block Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump-block-flag"}

# XIAOWAN Smart Pet Water Dispenser (mmgg.pet_waterer.s4) item file lines

note: Autogenerated example. Replace the id (pet_waterer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_pet_waterer "XIAOWAN Smart Pet Water Dispenser" <status>
Number fault "Pet Drinking Fountain - Device Fault" (G_pet_waterer) {channel="miio:basic:pet_waterer:fault"}
Switch on "Power" (G_pet_waterer) {channel="miio:basic:pet_waterer:on"}
Number mode "Mode" (G_pet_waterer) {channel="miio:basic:pet_waterer:mode"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:filter-left-time"}
Switch on1 "Indicator Light - Switch" (G_pet_waterer) {channel="miio:basic:pet_waterer:on1"}
Number:Time cotton_left_time "Filter Cotton - Cotton Left Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:cotton-left-time"}
Number:Time remain_clean_time "Remain Clean Time - Remain Clean Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:remain-clean-time"}
Switch no_water_flag "No Water Flag - No Water Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-flag"}
String resetConsumable "Consumables Reset" (G_pet_waterer) {channel="miio:basic:pet_waterer:resetConsumable"}
Number:Time no_water_time "No Water Flag - No Water Time" (G_pet_waterer) {channel="miio:basic:pet_waterer:no-water-time"}
Switch pump_block_flag "No Water Flag - Pump Block Flag" (G_pet_waterer) {channel="miio:basic:pet_waterer:pump-block-flag"}

# MR.BOND (mrbond.airer.m1pro) item file lines

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Switch led "LED Status" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}
Switch disinfect "disinfect" (G_airer) {channel="miio:basic:airer:disinfect"}
Number distime "Disinfect Time" (G_airer) {channel="miio:basic:airer:distime"}

# MR.BOND (mrbond.airer.m1s) item file lines

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Switch led "LED Status" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}
Switch disinfect "disinfect" (G_airer) {channel="miio:basic:airer:disinfect"}
Number distime "Disinfect Time" (G_airer) {channel="miio:basic:airer:distime"}

# MR.BOND (mrbond.airer.m1super) item file lines

note: Autogenerated example. Replace the id (airer) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airer "MR.BOND" <status>
Switch dry "Dry" (G_airer) {channel="miio:basic:airer:dry"}
Switch led "LED Status" (G_airer) {channel="miio:basic:airer:led"}
Number motor "Motor" (G_airer) {channel="miio:basic:airer:motor"}
Number drytime "Dry Time" (G_airer) {channel="miio:basic:airer:drytime"}
Number airer_location "Airer Location" (G_airer) {channel="miio:basic:airer:airer_location"}
Switch disinfect "disinfect" (G_airer) {channel="miio:basic:airer:disinfect"}
Number distime "Disinfect Time" (G_airer) {channel="miio:basic:airer:distime"}

# WIDETECH WDH318EFW1 Internet Dehumidifier (nwt.derh.wdh318efw1) item file lines

note: Autogenerated example. Replace the id (derh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_derh "WIDETECH WDH318EFW1 Internet Dehumidifier" <status>
Switch power "Power" (G_derh) {channel="miio:basic:derh:power"}
String mode "Mode" (G_derh) {channel="miio:basic:derh:mode"}
Number:Dimensionless autohumidity "Auto humidity" (G_derh) {channel="miio:basic:derh:autohumidity"}
Number fanspeed "Fan Speed" (G_derh) {channel="miio:basic:derh:fanspeed"}
Switch buzzer "Buzzer" (G_derh) {channel="miio:basic:derh:buzzer"}
Switch led "LED" (G_derh) {channel="miio:basic:derh:led"}
Switch childlock "Child Lock" (G_derh) {channel="miio:basic:derh:childlock"}
Number:Dimensionless humidity "Humidity" (G_derh) {channel="miio:basic:derh:humidity"}
Number:Temperature temperature "Temperature" (G_derh) {channel="miio:basic:derh:temperature"}
Switch tankfull "Tank Full" (G_derh) {channel="miio:basic:derh:tankfull"}
Switch compressorstatus "Compressor Status" (G_derh) {channel="miio:basic:derh:compressorstatus"}
Switch defroststatus "Defrost Status" (G_derh) {channel="miio:basic:derh:defroststatus"}
Number fanst "Fan St" (G_derh) {channel="miio:basic:derh:fanst"}
String alarm "Alarm" (G_derh) {channel="miio:basic:derh:alarm"}

# Philips Zhirui Ceiling Lamp Bedroom 40W (philips.light.bceiling1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Zhirui Ceiling Lamp Bedroom 40W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

# Philips Zhirui Ceiling Lamp Bedroom 28W (philips.light.bceiling2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Zhirui Ceiling Lamp Bedroom 28W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

# Philips ZhiRui E27 bulb (philips.light.bulb) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui E27 bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# Philips ZhiRui E14 Candle Lamp Frosted version (philips.light.candle) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui E14 Candle Lamp Frosted version" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

# Philips ZhiRui E14 Candle Lamp Crystal version (philips.light.candle2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui E14 Candle Lamp Crystal version" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

# Mijia Philips Color Bulb (philips.light.cbulb) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mijia Philips Color Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Color cid "Color" (G_light) {channel="miio:basic:light:cid"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch switch_en "Switch Enabled" (G_light) {channel="miio:basic:light:switch_en"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# Philips Light (philips.light.cbulbs) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Color cid "Color" (G_light) {channel="miio:basic:light:cid"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch switch_en "Switch Enabled" (G_light) {channel="miio:basic:light:switch_en"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# Philips Connected Ceiling (philips.light.ceiling) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Connected Ceiling" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

# Philips Light (philips.light.dcolor) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Color cid "Color" (G_light) {channel="miio:basic:light:cid"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch switch_en "Switch Enabled" (G_light) {channel="miio:basic:light:switch_en"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# ZhiRui Dimmable Downlight (philips.light.dlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "ZhiRui Dimmable Downlight" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Philips ZhiRui Downlight (philips.light.downlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui Downlight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# Philips Wi-Fi bulb E27 White (philips.light.hbulb) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Wi-Fi bulb E27 White" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# Philips ZhiYi Ceiling Lamp FL 40W (philips.light.lnblight1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling Lamp FL 40W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

# Philips ZhiYi Ceiling Lamp FL 28W (philips.light.lnblight2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling Lamp FL 28W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

# Philips ZhiYi Ceiling Lamp FL 80W (philips.light.lnlrlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling Lamp FL 80W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

# Philips Zhirui Ceiling Lamp Living room 80W (philips.light.lrceiling) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Zhirui Ceiling Lamp Living room 80W" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch sw "Switch" (G_light) {channel="miio:basic:light:sw"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}
Switch ms "MiBand Notifications" (G_light) {channel="miio:basic:light:ms"}
Switch ac "Auto Ambiance" (G_light) {channel="miio:basic:light:ac"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch mb "MiBand" (G_light) {channel="miio:basic:light:mb"}

# Zhirui Ceiling Lamp Nordic 80W (philips.light.mceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Nordic 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Nordic 40W (philips.light.mceilm) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Nordic 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Nordic 28W (philips.light.mceils) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Nordic 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Philips Smart Lamp (philips.light.mono1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Smart Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}

# Philips ZhiRui Bedside Lamp (philips.light.moonlight) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiRui Bedside Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch gonight "Go Night" (G_light) {channel="miio:basic:light:gonight"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

# Zhirui Ceiling Lamp Black 80W (philips.light.obceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Black 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Black 40W (philips.light.obceim) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Black 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Black 28W (philips.light.obceis) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Black 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Mijia Philips Study Desk Lamp (philips.light.rwread) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mijia Philips Study Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number flm "Follow Me" (G_light) {channel="miio:basic:light:flm"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}

# Zhirui Ceiling Lamp Starry 80W (philips.light.sceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Starry 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Starry 40W (philips.light.sceilm) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Starry 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Starry 28W (philips.light.sceils) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Starry 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Philips EyeCare Connected Desk Lamp gen2. (philips.light.sread1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips EyeCare Connected Desk Lamp gen2." <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number illumination "Ambient Illumination" (G_light) {channel="miio:basic:light:illumination"}
Switch eyecare "Eyecare" (G_light) {channel="miio:basic:light:eyecare"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}

# Mijia Philips Desk Lamp 2S (philips.light.sread2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mijia Philips Desk Lamp 2S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number illumination "Ambient Illumination" (G_light) {channel="miio:basic:light:illumination"}
Switch eyecare "Eyecare" (G_light) {channel="miio:basic:light:eyecare"}
Switch bl "Night Light" (G_light) {channel="miio:basic:light:bl"}

# Philips Connected Lights (philips.light.virtual) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips Connected Lights" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# Zhirui Ceiling Lamp Gorgeous 80W (philips.light.xzceil) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Gorgeous 80W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Gorgeous 40W (philips.light.xzceim) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Gorgeous 40W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Zhirui Ceiling Lamp Gorgeous 28W (philips.light.xzceis) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Zhirui Ceiling Lamp Gorgeous 28W" <status>
Switch on "Power" (G_light) {channel="miio:basic:light:on"}
Number mode "Mode" (G_light) {channel="miio:basic:light:mode"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number cct "Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number dv "Delayed Turn-off" (G_light) {channel="miio:basic:light:dv"}
Switch WallSceneEn "Wall Scene Enable" (G_light) {channel="miio:basic:light:WallSceneEn"}
String WallScene "Wall Scene" (G_light) {channel="miio:basic:light:WallScene"}
String autoCct "Auto CCT" (G_light) {channel="miio:basic:light:autoCct"}
Number dimmingPeriod "Dimming Period" (G_light) {channel="miio:basic:light:dimmingPeriod"}
String MibandStatus "Mi Band Status" (G_light) {channel="miio:basic:light:MibandStatus"}
String actions "Actions" (G_light) {channel="miio:basic:light:actions"}

# Philips ZhiYi Ceiling lamp (philips.light.zyceiling) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Ceiling lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch toggle "Toggle" (G_light) {channel="miio:basic:light:toggle"}

# Philips ZhiYi Desk Lamp (philips.light.zysread) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# Philips ZhiYi Strip (philips.light.zystrip) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Philips ZhiYi Strip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer cct "Correlated Color Temperature" (G_light) {channel="miio:basic:light:cct"}
Number scene "Scene" (G_light) {channel="miio:basic:light:scene"}
Number dv "DV" (G_light) {channel="miio:basic:light:dv"}
Switch switchscene "Switch Scene" (G_light) {channel="miio:basic:light:switchscene"}
Switch delayoff "Delay Off" (G_light) {channel="miio:basic:light:delayoff"}

# CHINGMI Smart Power Strip v1 (qmi.powerstrip.v1) item file lines

note: Autogenerated example. Replace the id (powerstrip) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_powerstrip "CHINGMI Smart Power Strip v1" <status>
Switch power "Power" (G_powerstrip) {channel="miio:basic:powerstrip:power"}
String mode "Mode" (G_powerstrip) {channel="miio:basic:powerstrip:mode"}
Number:Power powerUsage "Power Consumption" (G_powerstrip) {channel="miio:basic:powerstrip:powerUsage"}
Number:ElectricPotential voltage "Voltage" (G_powerstrip) {channel="miio:basic:powerstrip:voltage"}
Switch led "wifi LED" (G_powerstrip) {channel="miio:basic:powerstrip:led"}
Number power_price "Power Price" (G_powerstrip) {channel="miio:basic:powerstrip:power_price"}
Number power_factor "Power Factor" (G_powerstrip) {channel="miio:basic:powerstrip:power_factor"}
Number:ElectricCurrent current "Current" (G_powerstrip) {channel="miio:basic:powerstrip:current"}
Number:ElectricCurrent elec_leakage "Electic Leakage" (G_powerstrip) {channel="miio:basic:powerstrip:elec_leakage"}
Number:Temperature temperature "Temperature" (G_powerstrip) {channel="miio:basic:powerstrip:temperature"}

# ROIDMI EVE vacuum (roidmi.vacuum.v60) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "ROIDMI EVE vacuum" <status>
String actions "Actions" (G_vacuum) {channel="miio:basic:vacuum:actions"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep_type"}
Number on "Robot Cleaner - Switch Status" (G_vacuum) {channel="miio:basic:vacuum:on"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery_level"}
Number charging_state "Battery - Charging State" (G_vacuum) {channel="miio:basic:vacuum:charging_state"}
Number:Dimensionless volume "Speaker - Volume" (G_vacuum) {channel="miio:basic:vacuum:volume"}
Switch mute "Speaker - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_vacuum) {channel="miio:basic:vacuum:filter_life_level"}
Number:Time filter_left_time "Filter - Filter Left Time" (G_vacuum) {channel="miio:basic:vacuum:filter_left_time"}
Number:Time brush_left_time "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time"}
Number:Dimensionless brush_life_level "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level"}
Number:Time brush_left_time1 "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time1"}
Number:Dimensionless brush_life_level1 "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level1"}
Number:Time brush_left_time2 "Brush Cleaner - Brush Left Time" (G_vacuum) {channel="miio:basic:vacuum:brush_left_time2"}
Number:Dimensionless brush_life_level2 "Brush Cleaner - Brush Life Level" (G_vacuum) {channel="miio:basic:vacuum:brush_life_level2"}
Switch mop "Custom - Mop" (G_vacuum) {channel="miio:basic:vacuum:mop"}
Number work_station_freq "Custom - Work Station Freq" (G_vacuum) {channel="miio:basic:vacuum:work_station_freq"}
String timing "Custom - Timing" (G_vacuum) {channel="miio:basic:vacuum:timing"}
Number clean_area "Custom - Clean Area" (G_vacuum) {channel="miio:basic:vacuum:clean_area"}
String uid "Custom - Uid" (G_vacuum) {channel="miio:basic:vacuum:uid"}
Switch auto_boost "Custom - Auto Boost" (G_vacuum) {channel="miio:basic:vacuum:auto_boost"}
String forbid_mode "Custom - Forbid Mode" (G_vacuum) {channel="miio:basic:vacuum:forbid_mode"}
Number water_level "Custom - Water Level" (G_vacuum) {channel="miio:basic:vacuum:water_level"}
Number:Time total_clean_time "Custom - Total Clean Time" (G_vacuum) {channel="miio:basic:vacuum:total_clean_time"}
Number total_clean_areas "Custom - Total Clean Areas" (G_vacuum) {channel="miio:basic:vacuum:total_clean_areas"}
Number clean_counts "Custom - Clean Counts" (G_vacuum) {channel="miio:basic:vacuum:clean_counts"}
Number:Time clean_time "Custom - Clean Time" (G_vacuum) {channel="miio:basic:vacuum:clean_time"}
Switch double_clean "Custom - Double Clean" (G_vacuum) {channel="miio:basic:vacuum:double_clean"}
Switch edge_sweep "Custom - Edge Sweep" (G_vacuum) {channel="miio:basic:vacuum:edge_sweep"}
Switch led_switch "Custom - Led Switch" (G_vacuum) {channel="miio:basic:vacuum:led_switch"}
Switch lidar_collision "Custom - Lidar Collision" (G_vacuum) {channel="miio:basic:vacuum:lidar_collision"}
Switch station_key "Custom - Station Key" (G_vacuum) {channel="miio:basic:vacuum:station_key"}
Switch station_led "Custom - Station Led" (G_vacuum) {channel="miio:basic:vacuum:station_led"}
String current_audio "Custom - Current Audio" (G_vacuum) {channel="miio:basic:vacuum:current_audio"}
String progress "Custom - Progress" (G_vacuum) {channel="miio:basic:vacuum:progress"}
Number station_type "Custom - Station Type" (G_vacuum) {channel="miio:basic:vacuum:station_type"}
String voice_conf "Custom - Voice Conf" (G_vacuum) {channel="miio:basic:vacuum:voice_conf"}
String clean_path "Map - Clean Path" (G_vacuum) {channel="miio:basic:vacuum:clean_path"}
String restricted_zone "Map - Restricted Zone" (G_vacuum) {channel="miio:basic:vacuum:restricted_zone"}
String auto_area "Map - Auto Area" (G_vacuum) {channel="miio:basic:vacuum:auto_area"}
Switch map_memory "Map - Map Memory" (G_vacuum) {channel="miio:basic:vacuum:map_memory"}
String map_name "Map - Map Name" (G_vacuum) {channel="miio:basic:vacuum:map_name"}
Switch use_auto_area "Map - Use Auto Area" (G_vacuum) {channel="miio:basic:vacuum:use_auto_area"}
Number path_type "Map - Path Type" (G_vacuum) {channel="miio:basic:vacuum:path_type"}
Number sweep_mode "Sweep - Sweep Mode" (G_vacuum) {channel="miio:basic:vacuum:sweep_mode"}

# PTX OneKey Switch (WIFI) (090615.switch.xswitch01) item file lines

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "PTX OneKey Switch (WIFI)" <status>
Number switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}

# PTX Twokey switch(wifi) (090615.switch.xswitch02) item file lines

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "PTX Twokey switch(wifi)" <status>
Number switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Number switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}

# PTX ThreeKey Switch (WIFI) (090615.switch.xswitch03) item file lines

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "PTX ThreeKey Switch (WIFI)" <status>
Number switch1state "Switch 1" (G_switch) {channel="miio:basic:switch:switch1state"}
Number switch2state "Switch 2" (G_switch) {channel="miio:basic:switch:switch2state"}
Number switch3state "Switch 3" (G_switch) {channel="miio:basic:switch:switch3state"}
String switch1name "Switch Name 1" (G_switch) {channel="miio:basic:switch:switch1name"}
String switch2name "Switch Name 2" (G_switch) {channel="miio:basic:switch:switch2name"}
String switch3name "Switch Name 3" (G_switch) {channel="miio:basic:switch:switch3name"}

# SCISHARE Smart Capsule Coffee Machine (scishare.coffee.s1102) item file lines

note: Autogenerated example. Replace the id (coffee) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_coffee "SCISHARE Smart Capsule Coffee Machine" <status>
Switch power "Power" (G_coffee) {channel="miio:basic:coffee:power"}
String Status "status" (G_coffee) {channel="miio:basic:coffee:Status"}
Number expresso "Brew Expresso" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number expresso "Brew Americano" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number boil "Boil water" (G_coffee) {channel="miio:basic:coffee:boil"}

# Xiaomi Scishare Smart Capsule Coffee Machine (scishare.coffee.s1301) item file lines

note: Autogenerated example. Replace the id (coffee) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_coffee "Xiaomi Scishare Smart Capsule Coffee Machine" <status>
Switch power "Power" (G_coffee) {channel="miio:basic:coffee:power"}
String Status "status" (G_coffee) {channel="miio:basic:coffee:Status"}
Number expresso "Brew Expresso" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number expresso "Brew Americano" (G_coffee) {channel="miio:basic:coffee:expresso"}
Number boil "Boil water" (G_coffee) {channel="miio:basic:coffee:boil"}

# Viomi Cleaning Robot V-RVCLM21B (viomi.vacuum.v6) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Viomi Cleaning Robot V-RVCLM21B" <status>
Number vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Box type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "mop_type" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number s_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:s_time"}
Number s_area "Clean Area" (G_vacuum) {channel="miio:basic:vacuum:s_area"}
Number suction_grade "suction_grade" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "water_grade" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Number remember_map "remember_map" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "has_map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number is_mop "is_mop" (G_vacuum) {channel="miio:basic:vacuum:is_mop"}
Number has_newmap "has_newmap" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}

# Mi Robot Vacuum-Mop P (viomi.vacuum.v7) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop P" <status>
Number vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Box type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "mop_type" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number s_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:s_time"}
Number s_area "Clean Area" (G_vacuum) {channel="miio:basic:vacuum:s_area"}
Number suction_grade "suction_grade" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "water_grade" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Number remember_map "remember_map" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "has_map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number is_mop "is_mop" (G_vacuum) {channel="miio:basic:vacuum:is_mop"}
Number has_newmap "has_newmap" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}

# Mi Robot Vacuum-Mop P (viomi.vacuum.v8) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Mi Robot Vacuum-Mop P" <status>
Number vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number state "State" (G_vacuum) {channel="miio:basic:vacuum:state"}
Number mode "Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number err_state "Error" (G_vacuum) {channel="miio:basic:vacuum:err_state"}
Number battery_life "Battery" (G_vacuum) {channel="miio:basic:vacuum:battery_life"}
Number box_type "Box type" (G_vacuum) {channel="miio:basic:vacuum:box_type"}
Number mop_type "mop_type" (G_vacuum) {channel="miio:basic:vacuum:mop_type"}
Number mop_route "Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop_route"}
Number s_time "Clean time" (G_vacuum) {channel="miio:basic:vacuum:s_time"}
Number s_area "Clean Area" (G_vacuum) {channel="miio:basic:vacuum:s_area"}
Number suction_grade "suction_grade" (G_vacuum) {channel="miio:basic:vacuum:suction_grade"}
Number water_grade "water_grade" (G_vacuum) {channel="miio:basic:vacuum:water_grade"}
Number remember_map "remember_map" (G_vacuum) {channel="miio:basic:vacuum:remember_map"}
Number has_map "has_map" (G_vacuum) {channel="miio:basic:vacuum:has_map"}
Number is_mop "is_mop" (G_vacuum) {channel="miio:basic:vacuum:is_mop"}
Number has_newmap "has_newmap" (G_vacuum) {channel="miio:basic:vacuum:has_newmap"}

# Viomi S9 (viomi.vacuum.v18) item file lines

note: Autogenerated example. Replace the id (vacuum) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_vacuum "Viomi S9" <status>
String vacuumaction "Vacuum Action" (G_vacuum) {channel="miio:basic:vacuum:vacuumaction"}
Number status "Robot Cleaner - Status" (G_vacuum) {channel="miio:basic:vacuum:status"}
Number fault "Robot Cleaner - Device Fault" (G_vacuum) {channel="miio:basic:vacuum:fault"}
Number wdr_mode "Robot Cleaner - Wide Dynamic Range Mode" (G_vacuum) {channel="miio:basic:vacuum:wdr-mode"}
Number door_state "Robot Cleaner - Door State" (G_vacuum) {channel="miio:basic:vacuum:door-state"}
Number contact_state "Robot Cleaner - Contact State" (G_vacuum) {channel="miio:basic:vacuum:contact-state"}
Number:Time contact_state1 "Robot Cleaner - Contact State" (G_vacuum) {channel="miio:basic:vacuum:contact-state1"}
Number contact_state2 "Robot Cleaner - Contact State" (G_vacuum) {channel="miio:basic:vacuum:contact-state2"}
Number mute "Robot Cleaner - Mute" (G_vacuum) {channel="miio:basic:vacuum:mute"}
Number sweep_type "Robot Cleaner - Sweep Type" (G_vacuum) {channel="miio:basic:vacuum:sweep-type"}
Number mode "Robot Cleaner - Mode" (G_vacuum) {channel="miio:basic:vacuum:mode"}
Number:Dimensionless battery_level "Battery - Battery Level" (G_vacuum) {channel="miio:basic:vacuum:battery-level"}
Switch repeat_state "Viomi Vacuum - Repeat State" (G_vacuum) {channel="miio:basic:vacuum:repeat-state"}
Switch remember_state "Viomi Vacuum - Remember State" (G_vacuum) {channel="miio:basic:vacuum:remember-state"}
Number mop_route "Viomi Vacuum - Mop Route" (G_vacuum) {channel="miio:basic:vacuum:mop-route"}
Number:Dimensionless side_brush_life "Viomi Vacuum - Side Brush Life" (G_vacuum) {channel="miio:basic:vacuum:side-brush-life"}
Number:Time side_brush_hours "Viomi Vacuum - Side Brush Hours" (G_vacuum) {channel="miio:basic:vacuum:side-brush-hours"}
Number:Dimensionless main_brush_life "Viomi Vacuum - Main Brush Life" (G_vacuum) {channel="miio:basic:vacuum:main-brush-life"}
Number:Time main_brush_hours "Viomi Vacuum - Main Brush Hours" (G_vacuum) {channel="miio:basic:vacuum:main-brush-hours"}
Number:Dimensionless hypa_life "Viomi Vacuum - Hypa Life" (G_vacuum) {channel="miio:basic:vacuum:hypa-life"}
Number:Time hypa_hours "Viomi Vacuum - Hypa Hours" (G_vacuum) {channel="miio:basic:vacuum:hypa-hours"}
Number:Dimensionless mop_life "Viomi Vacuum - Mop Life" (G_vacuum) {channel="miio:basic:vacuum:mop-life"}
Number:Time mop_hours "Viomi Vacuum - Mop Hours" (G_vacuum) {channel="miio:basic:vacuum:mop-hours"}
Number suction_grade "Viomi Vacuum - Suction Grade" (G_vacuum) {channel="miio:basic:vacuum:suction-grade"}
Number water_grade "Viomi Vacuum - Water Grade" (G_vacuum) {channel="miio:basic:vacuum:water-grade"}
Number map_num "Viomi Vacuum - Map Num" (G_vacuum) {channel="miio:basic:vacuum:map-num"}
Number time_zone "Viomi Vacuum - Time Zone" (G_vacuum) {channel="miio:basic:vacuum:time-zone"}
Number:Time clean_start_time "Viomi Vacuum - Clean Start Time" (G_vacuum) {channel="miio:basic:vacuum:clean-start-time"}
Number:Time clean_use_time "Viomi Vacuum - Clean Use Time" (G_vacuum) {channel="miio:basic:vacuum:clean-use-time"}
Number clean_area "Viomi Vacuum - Clean Area" (G_vacuum) {channel="miio:basic:vacuum:clean-area"}
String clean_map_url "Viomi Vacuum - Clean Map Url" (G_vacuum) {channel="miio:basic:vacuum:clean-map-url"}
Number clean_mode "Viomi Vacuum - Clean Mode" (G_vacuum) {channel="miio:basic:vacuum:clean-mode"}
Number clean_way "Viomi Vacuum - Clean Way" (G_vacuum) {channel="miio:basic:vacuum:clean-way"}
String cur_lang "Viomi Vacuum - Cur Lang" (G_vacuum) {channel="miio:basic:vacuum:cur-lang"}
Number cur_map_id "Viomi Vacuum - Cur Map Id" (G_vacuum) {channel="miio:basic:vacuum:cur-map-id"}
String cur_map_url "Viomi Vacuum - Cur Map Url" (G_vacuum) {channel="miio:basic:vacuum:cur-map-url"}
Number:Time last_update_time "Viomi Vacuum - Last Update Time" (G_vacuum) {channel="miio:basic:vacuum:last-update-time"}
Number has_map "Viomi Vacuum - Has Map" (G_vacuum) {channel="miio:basic:vacuum:has-map"}
Number has_newmap "Viomi Vacuum - Has Newmap" (G_vacuum) {channel="miio:basic:vacuum:has-newmap"}
Number dust_collection "Viomi Vacuum - Dust Collection" (G_vacuum) {channel="miio:basic:vacuum:dust-collection"}
Number dnd_enable "Order - Dnd Enable" (G_vacuum) {channel="miio:basic:vacuum:dnd-enable"}
Number:Time dnd_start_hour "Order - Dnd Start Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-hour"}
Number:Time dnd_start_minute "Order - Dnd Start Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-start-minute"}
Number:Time dnd_end_hour "Order - Dnd End Hour" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-hour"}
Number:Time dnd_end_minute "Order - Dnd End Minute" (G_vacuum) {channel="miio:basic:vacuum:dnd-end-minute"}
Number dnd_timezone "Order - Dnd Timezone" (G_vacuum) {channel="miio:basic:vacuum:dnd-timezone"}
Number timestamp "Order - Timestamp" (G_vacuum) {channel="miio:basic:vacuum:timestamp"}
String orderdata "Order - Orderdata" (G_vacuum) {channel="miio:basic:vacuum:orderdata"}
String target_point "Point Zone - Target Point" (G_vacuum) {channel="miio:basic:vacuum:target-point"}
Number map_type "Map - Map Type" (G_vacuum) {channel="miio:basic:vacuum:map-type"}
Number map_id "Map - Map Id" (G_vacuum) {channel="miio:basic:vacuum:map-id"}
String map_name "Map - Map Name" (G_vacuum) {channel="miio:basic:vacuum:map-name"}
String cur_cleaning_path "Map - Cur Cleaning Path" (G_vacuum) {channel="miio:basic:vacuum:cur-cleaning-path"}
String map_list "Map - Map List" (G_vacuum) {channel="miio:basic:vacuum:map-list"}
String oper_result "Map - Oper Result" (G_vacuum) {channel="miio:basic:vacuum:oper-result"}
Number auto_area_id "Map - Auto Area Id" (G_vacuum) {channel="miio:basic:vacuum:auto-area-id"}
String target_voice "Voice - Target Voice" (G_vacuum) {channel="miio:basic:vacuum:target-voice"}
String cur_voice "Voice - Cur Voice" (G_vacuum) {channel="miio:basic:vacuum:cur-voice"}
Number download_status "Voice - Download Status" (G_vacuum) {channel="miio:basic:vacuum:download-status"}
Number:Dimensionless download_progress "Voice - Download Progress" (G_vacuum) {channel="miio:basic:vacuum:download-progress"}

# VIOMI Internet Electric Water Heater 1A (60L) (viomi.waterheater.e1) item file lines

note: Autogenerated example. Replace the id (waterheater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterheater "VIOMI Internet Electric Water Heater 1A (60L)" <status>
Number washStatus "Wash Status" (G_waterheater) {channel="miio:basic:waterheater:washStatus"}
Number velocity "Velocity" (G_waterheater) {channel="miio:basic:waterheater:velocity"}
Number:Temperature waterTemp "Water Temperature" (G_waterheater) {channel="miio:basic:waterheater:waterTemp"}
Number:Temperature targetTemp "Target Temperature" (G_waterheater) {channel="miio:basic:waterheater:targetTemp"}
Number errStatus "Error Status" (G_waterheater) {channel="miio:basic:waterheater:errStatus"}
Number hotWater "Hot Water" (G_waterheater) {channel="miio:basic:waterheater:hotWater"}
Switch needClean "Need Clean" (G_waterheater) {channel="miio:basic:waterheater:needClean"}
Number modeType "Mode" (G_waterheater) {channel="miio:basic:waterheater:modeType"}
Number appointStart "Appoint Start" (G_waterheater) {channel="miio:basic:waterheater:appointStart"}
Number appointEnd "Appoint End" (G_waterheater) {channel="miio:basic:waterheater:appointEnd"}

# Mi Inverter Air Conditioner (1.5HP) (xiaomi.aircondition.ma1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Inverter Air Conditioner (1.5HP)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

# Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1) (xiaomi.aircondition.ma2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Inverter Air Conditioner (1.5HP, China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

# Mi Vertical Air Conditioner (2HP) (xiaomi.aircondition.ma4) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Vertical Air Conditioner (2HP)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

# Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma5) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Vertical Air Conditioner C1 (2HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

# Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3) (xiaomi.aircondition.ma6) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C1 (1.5HP / Conventional / China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

# Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.ma9) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C1 (1HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}

# Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1) (xiaomi.aircondition.mc2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc4) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc5) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner A (1.5HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc6) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Vertical Air Conditioner A (2HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1) (xiaomi.aircondition.mc7) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Vertical Air Conditioner A (3HP / Inverter / China Energy Label Level <1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc8) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner(1.5HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mc9) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner(2HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c10) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner (2HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.c11) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Vertical Air Conditioner (3HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mh2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner C (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3) (xiaomi.aircondition.mh3) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner(1HP/Inverter/New China Energy Label Level 3)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt1) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner X (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt2) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Air Conditioner X (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt3) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Gentle Breeze Air Conditioner (1HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt4) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Gentle Breeze Air Conditioner (1.5HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1) (xiaomi.aircondition.mt5) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Gentle Breeze Vertical Air Conditioner (3HP / Inverter / New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt7) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner (1HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1) (xiaomi.aircondition.mt8) item file lines

note: Autogenerated example. Replace the id (aircondition) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_aircondition "Mi Smart Ultra Electricity Saving Air Conditioner (1.5HP/Inverter/New China Energy Label Level 1)" <status>
Switch on "Power" (G_aircondition) {channel="miio:basic:aircondition:on"}
Number mode "Air Conditioner - Mode" (G_aircondition) {channel="miio:basic:aircondition:mode"}
Number:Temperature target_temperature "Air Conditioner - Target Temperature" (G_aircondition) {channel="miio:basic:aircondition:target-temperature"}
Switch eco "Air Conditioner - Eco" (G_aircondition) {channel="miio:basic:aircondition:eco"}
Switch heater "Air Conditioner - Heater" (G_aircondition) {channel="miio:basic:aircondition:heater"}
Switch dryer "Air Conditioner - Dryer" (G_aircondition) {channel="miio:basic:aircondition:dryer"}
Switch sleep_mode "Air Conditioner - Sleep Mode" (G_aircondition) {channel="miio:basic:aircondition:sleep-mode"}
Number fan_level "Fan Control - Fan Level" (G_aircondition) {channel="miio:basic:aircondition:fan-level"}
Switch vertical_swing "Fan Control - Vertical Swing" (G_aircondition) {channel="miio:basic:aircondition:vertical-swing"}
Number:Temperature temperature "Environment - Temperature" (G_aircondition) {channel="miio:basic:aircondition:temperature"}
Switch alarm "Alarm - Alarm" (G_aircondition) {channel="miio:basic:aircondition:alarm"}
Switch on1 "Indicator Light - Switch Status" (G_aircondition) {channel="miio:basic:aircondition:on1"}
Number:Energy electricity "Power consumption accumulation in kWh" (G_aircondition) {channel="miio:basic:aircondition:electricity"}
Number elec_count "Electricity - Count" (G_aircondition) {channel="miio:basic:aircondition:elec-count"}
String clean "Maintenance - Clean" (G_aircondition) {channel="miio:basic:aircondition:clean"}
String examine "Maintenance - Examine" (G_aircondition) {channel="miio:basic:aircondition:examine"}
Number:Time running_duration "Maintenance - Running Duration" (G_aircondition) {channel="miio:basic:aircondition:running-duration"}
Number:Dimentionless fan_percent "Fan Speed %" (G_aircondition) {channel="miio:basic:aircondition:fan-percent"}
String timer "Enhance - Timer" (G_aircondition) {channel="miio:basic:aircondition:timer"}

# Uclean Smart Toilet Seat (xjx.toilet.pro (opens new window)) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Uclean Smart Toilet Seat" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

# Uclean Smart Toilet pure (xjx.toilet.pure) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Uclean Smart Toilet pure" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

# Uclean Smart Toilet relax (xjx.toilet.relax) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Uclean Smart Toilet relax" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

# Whale Spout Smart Toilet Zero (xjx.toilet.zero) item file lines

note: Autogenerated example. Replace the id (toilet) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_toilet "Whale Spout Smart Toilet Zero" <status>
Number:Temperature seat_temp "Seat Temperature" (G_toilet) {channel="miio:basic:toilet:seat_temp"}
Number status_seatheat "Seat Status" (G_toilet) {channel="miio:basic:toilet:status_seatheat"}
Number:Temperature water_temp_t "Water Temperature" (G_toilet) {channel="miio:basic:toilet:water_temp_t"}
Number:Temperature fan_temp "Fan Temperature" (G_toilet) {channel="miio:basic:toilet:fan_temp"}
Number status_led "Night Light" (G_toilet) {channel="miio:basic:toilet:status_led"}

note: Autogenerated example. Replace the id (bhf_light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_bhf_light "Yeelight Smart Bath Heater Pro" <status>
Switch power "Power" (G_bhf_light) {channel="miio:basic:bhf_light:power"}
String bh_mode "Bath Heater mode" (G_bhf_light) {channel="miio:basic:bhf_light:bh_mode"}
Dimmer brightness "Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_bhf_light) {channel="miio:basic:bhf_light:delayoff"}
Number:Temperature temperature "Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:temperature"}
Number nightlightBrightness "Nightlight Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:nightlightBrightness"}

note: Autogenerated example. Replace the id (bhf_light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_bhf_light "Yeelight Smart Bath Heater" <status>
Switch power "Power" (G_bhf_light) {channel="miio:basic:bhf_light:power"}
String bh_mode "Bath Heater mode" (G_bhf_light) {channel="miio:basic:bhf_light:bh_mode"}
Dimmer brightness "Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_bhf_light) {channel="miio:basic:bhf_light:delayoff"}
Number:Temperature temperature "Temperature" (G_bhf_light) {channel="miio:basic:bhf_light:temperature"}
Number nightlightBrightness "Nightlight Brightness" (G_bhf_light) {channel="miio:basic:bhf_light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Bedside Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Bedside Lamp 2" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Bedside Lamp II" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light SE" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (ceiling4) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling4 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling4) {channel="miio:basic:ceiling4:power"}
Dimmer brightness "Brightness" (G_ceiling4) {channel="miio:basic:ceiling4:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling4) {channel="miio:basic:ceiling4:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling4) {channel="miio:basic:ceiling4:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling4) {channel="miio:basic:ceiling4:colorMode"}
String name "Name" (G_ceiling4) {channel="miio:basic:ceiling4:name"}
String customScene "Set Scene" (G_ceiling4) {channel="miio:basic:ceiling4:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_ceiling4) {channel="miio:basic:ceiling4:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight HaoShi LED Ceiling Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Haoshi Ceiling Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "LED Ceiling Light Crystal Plus" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight HaoShi LED Ceiling Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Crystal Pendant Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Dimmer ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (ceiling10) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling10 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling10) {channel="miio:basic:ceiling10:power"}
Dimmer brightness "Brightness" (G_ceiling10) {channel="miio:basic:ceiling10:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling10) {channel="miio:basic:ceiling10:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling10) {channel="miio:basic:ceiling10:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling10) {channel="miio:basic:ceiling10:colorMode"}
String name "Name" (G_ceiling10) {channel="miio:basic:ceiling10:name"}
String customScene "Set Scene" (G_ceiling10) {channel="miio:basic:ceiling10:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_ceiling10) {channel="miio:basic:ceiling10:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light 320 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Stylized Ceiling Light  Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light Mini" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light 480 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Xingyu Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight ShaoHua Celing Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (ceiling19) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling19 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling19) {channel="miio:basic:ceiling19:power"}
Dimmer brightness "Brightness" (G_ceiling19) {channel="miio:basic:ceiling19:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling19) {channel="miio:basic:ceiling19:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling19) {channel="miio:basic:ceiling19:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling19) {channel="miio:basic:ceiling19:colorMode"}
String name "Name" (G_ceiling19) {channel="miio:basic:ceiling19:name"}
String customScene "Set Scene" (G_ceiling19) {channel="miio:basic:ceiling19:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_ceiling19) {channel="miio:basic:ceiling19:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (ceiling20) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_ceiling20 "Yeelight LED Ceiling Ambi Lamp" <status>
Switch power "Power" (G_ceiling20) {channel="miio:basic:ceiling20:power"}
Dimmer brightness "Brightness" (G_ceiling20) {channel="miio:basic:ceiling20:brightness"}
Number:Time delayoff "Shutdown Timer" (G_ceiling20) {channel="miio:basic:ceiling20:delayoff"}
Number colorTemperature "Color Temperature" (G_ceiling20) {channel="miio:basic:ceiling20:colorTemperature"}
Number colorMode "Color Mode" (G_ceiling20) {channel="miio:basic:ceiling20:colorMode"}
String name "Name" (G_ceiling20) {channel="miio:basic:ceiling20:name"}
String customScene "Set Scene" (G_ceiling20) {channel="miio:basic:ceiling20:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_ceiling20) {channel="miio:basic:ceiling20:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Living Room Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Ceiling Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Ceiling Light (350mm)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Jade Smart LED Ceiling Light C2001" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Color Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb (Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Smart Bulb (White and Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb 1S(Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Bulb Essential (White and Color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Smart LED Bulb 1SE (color)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb (Tunable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Desk Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Desk Lamp Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi LED Desk Lamp 1S" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Smart Desk Lamp Prime" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Light Sensor Desk Lamp V1" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Star LED Table Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Star Floor Lamp" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Screen Light Bar" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number:Temperature colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number ambientBrightness "Ambient Brightness" (G_light) {channel="miio:basic:light:ambientBrightness"}
Switch ambientPower "Ambient Power" (G_light) {channel="miio:basic:light:ambientPower"}
Color ambientColor "Ambient Color" (G_light) {channel="miio:basic:light:ambientColor"}
Number ambientColorTemperature "Ambient Color Temperature" (G_light) {channel="miio:basic:light:ambientColorTemperature"}
Number ambientColorMode "Ambient Color Mode" (G_light) {channel="miio:basic:light:ambientColorMode"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight White Bulb v2" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Bulb 1S(Dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED Filament Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Mi Smart LED Bulb" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight LED smart bulb W3(dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight GU10 Smart Bulb W1(dimmable)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Whiteglow Panel Light" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Lightstrip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Lightstrip Plus" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Color rgbColor "RGB Color" (G_light) {channel="miio:basic:light:rgbColor"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
Switch colorflow "Color Flow" (G_light) {channel="miio:basic:light:colorflow"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yeelight Willow LED Lightstrip" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Light Group (Mi & Yeelight)" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}

note: Autogenerated example. Replace the id (switch) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_switch "Yeelight Smart Dual Control Module" <status>
Switch on "First Switch - Switch Status" (G_switch) {channel="miio:basic:switch:on"}
Number mode "First Switch Default - Mode" (G_switch) {channel="miio:basic:switch:mode"}
Number mode1 "First Switch - Delay" (G_switch) {channel="miio:basic:switch:mode1"}
Switch on1 "Second Switch - Switch Status" (G_switch) {channel="miio:basic:switch:on1"}
Number mode2 "Second Switch Default - Mode" (G_switch) {channel="miio:basic:switch:mode2"}
Number mode3 "Second Switch Service - Delay" (G_switch) {channel="miio:basic:switch:mode3"}
Switch interlock "Extension - Interlock" (G_switch) {channel="miio:basic:switch:interlock"}
Number flash "Extension - Flash" (G_switch) {channel="miio:basic:switch:flash"}
String rc_list "Extension - Rc List" (G_switch) {channel="miio:basic:switch:rc-list"}

# Yilai Ceiling Light Aiyue 480 (yilai.light.ceiling1) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yilai Ceiling Light Aiyue 480" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

# Yilai Ceiling Lamp Hefeng 430 (yilai.light.ceiling2) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yilai Ceiling Lamp Hefeng 430" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

# Yilai Ceiling Lamp Hefeng Pro (yilai.light.ceiling3) item file lines

note: Autogenerated example. Replace the id (light) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_light "Yilai Ceiling Lamp Hefeng Pro" <status>
Switch power "Power" (G_light) {channel="miio:basic:light:power"}
Dimmer brightness "Brightness" (G_light) {channel="miio:basic:light:brightness"}
Number:Time delayoff "Shutdown Timer" (G_light) {channel="miio:basic:light:delayoff"}
Number colorTemperature "Color Temperature" (G_light) {channel="miio:basic:light:colorTemperature"}
Number colorMode "Color Mode" (G_light) {channel="miio:basic:light:colorMode"}
String name "Name" (G_light) {channel="miio:basic:light:name"}
String customScene "Set Scene" (G_light) {channel="miio:basic:light:customScene"}
Number nightlightBrightness "Nightlight Brightness" (G_light) {channel="miio:basic:light:nightlightBrightness"}

# Mi Water Purifier lx2 (yunmi.waterpuri.lx2) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier lx2" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx3) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier (Under Counter)" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier lx4 (yunmi.waterpuri.lx4) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier lx4" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier 1A/400G Pro (yunmi.waterpuri.lx5) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier 1A/400G Pro" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier (Under Counter) (yunmi.waterpuri.lx6) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier (Under Counter)" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier 500G/500G Pro (yunmi.waterpuri.lx7) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier 500G/500G Pro" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier 600G (yunmi.waterpuri.lx8) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier 600G" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier D1 (yunmi.waterpuri.lx9) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier D1" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier lx10 (yunmi.waterpuri.lx10) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier lx10" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier C1 (Triple Setting) (yunmi.waterpuri.lx11) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier C1 (Triple Setting)" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier S1 (yunmi.waterpuri.lx12) item file lines

note: Autogenerated example. Replace the id (waterpuri) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpuri "Mi Water Purifier S1" <status>
Number run_status "Run Status" (G_waterpuri) {channel="miio:basic:waterpuri:run_status"}
Number:Temperature temperature "Temperature" (G_waterpuri) {channel="miio:basic:waterpuri:temperature"}
Number rinse "Rinse" (G_waterpuri) {channel="miio:basic:waterpuri:rinse"}
Number tds_in "TDS in" (G_waterpuri) {channel="miio:basic:waterpuri:tds_in"}
Number tds_out "TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpuri) {channel="miio:basic:waterpuri:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpuri) {channel="miio:basic:waterpuri:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpuri) {channel="miio:basic:waterpuri:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpuri) {channel="miio:basic:waterpuri:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpuri) {channel="miio:basic:waterpuri:lightMode"}

# Mi Water Purifier v1 (yunmi.waterpurifier.v1) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier v1" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

# Mi Water Purifier v2 (yunmi.waterpurifier.v2) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier v2" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

# Mi Water Purifier (Under sink) v3 (yunmi.waterpurifier.v3) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier (Under sink) v3" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

# Mi Water Purifier v4 (yunmi.waterpurifier.v4) item file lines

note: Autogenerated example. Replace the id (waterpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_waterpurifier "Mi Water Purifier v4" <status>
Number run_status "Run Status" (G_waterpurifier) {channel="miio:basic:waterpurifier:run_status"}
Number:Temperature temperature "Temperature" (G_waterpurifier) {channel="miio:basic:waterpurifier:temperature"}
Number rinse "Rinse" (G_waterpurifier) {channel="miio:basic:waterpurifier:rinse"}
Number tds_in "TDS in" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_in"}
Number tds_out "TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out"}
Number f1_totalflow "Filter 1 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totalflow"}
Number f1_totaltime "Filter 1 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_totaltime"}
Number f1_usedflow "Filter 1 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedflow"}
Number f1_usedtime "Filter 1 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f1_usedtime"}
Number f2_totalflow "Filter 2 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totalflow"}
Number f2_totaltime "Filter 2 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_totaltime"}
Number f2_usedflow "Filter 2 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedflow"}
Number f2_usedtime "Filter 2 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f2_usedtime"}
Number f3_totalflow "Filter 3 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totalflow"}
Number f3_totaltime "Filter 3 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_totaltime"}
Number f3_usedflow "Filter 3 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedflow"}
Number f3_usedtime "Filter 3 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f3_usedtime"}
Number f4_totalflow "Filter 4 Total Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totalflow"}
Number f4_totaltime "Filter 4 Total Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_totaltime"}
Number f4_usedflow "Filter 4 Used Flow" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedflow"}
Number f4_usedtime "Filter 4 Used Time" (G_waterpurifier) {channel="miio:basic:waterpurifier:f4_usedtime"}
Number maintenance_state "Maintenance State" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_state"}
Number maintenance_interval "Maintenance Interval" (G_waterpurifier) {channel="miio:basic:waterpurifier:maintenance_interval"}
Number tds_warn_thd "TDS Warn Threshold" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_warn_thd"}
Number tds_out_avg "Average TDS out" (G_waterpurifier) {channel="miio:basic:waterpurifier:tds_out_avg"}
Number lightMode "Light Mode" (G_waterpurifier) {channel="miio:basic:waterpurifier:lightMode"}

# Smartmi Ventilation System (zhimi.airfresh.va2) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Smartmi Ventilation System" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Number:Dimensionless humidity "Humidity" (G_airfresh) {channel="miio:basic:airfresh:humidity"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Switch childLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:childLock"}
Switch buzzer "Buzzer" (G_airfresh) {channel="miio:basic:airfresh:buzzer"}
Number aqi "Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:aqi"}
Number averageaqi "Average Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:averageaqi"}
Number:Time filterhours "Filter Hours used" (G_airfresh) {channel="miio:basic:airfresh:filterhours"}
Number:Time usedhours "Run Time" (G_airfresh) {channel="miio:basic:airfresh:usedhours"}
Number motorspeed "Motor Speed" (G_airfresh) {channel="miio:basic:airfresh:motorspeed"}
Number led_level "Led - Brightness" (G_airfresh) {channel="miio:basic:airfresh:led_level"}
Number:Temperature temperature "Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

# Smartmi Fresh Air System (Heating) (zhimi.airfresh.va4) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Smartmi Fresh Air System (Heating)" <status>
Switch power "Power" (G_airfresh) {channel="miio:basic:airfresh:power"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
String mode "Mode" (G_airfresh) {channel="miio:basic:airfresh:mode"}
Number:Dimensionless humidity "Humidity" (G_airfresh) {channel="miio:basic:airfresh:humidity"}
Number:Dimensionless co2 "CO2" (G_airfresh) {channel="miio:basic:airfresh:co2"}
Switch childLock "Child Lock" (G_airfresh) {channel="miio:basic:airfresh:childLock"}
Switch buzzer "Buzzer" (G_airfresh) {channel="miio:basic:airfresh:buzzer"}
Number aqi "Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:aqi"}
Number averageaqi "Average Air Quality Index" (G_airfresh) {channel="miio:basic:airfresh:averageaqi"}
Number:Time filterhours "Filter Hours used" (G_airfresh) {channel="miio:basic:airfresh:filterhours"}
Number:Time usedhours "Run Time" (G_airfresh) {channel="miio:basic:airfresh:usedhours"}
Number motorspeed "Motor Speed" (G_airfresh) {channel="miio:basic:airfresh:motorspeed"}
Number led_level "Led - Brightness" (G_airfresh) {channel="miio:basic:airfresh:led_level"}
Number:Temperature temperature "Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

# Mi Fresh Air Ventilator C1-80 (zhimi.airfresh.ua1) item file lines

note: Autogenerated example. Replace the id (airfresh) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airfresh "Mi Fresh Air Ventilator C1-80" <status>
String actions "Actions" (G_airfresh) {channel="miio:basic:airfresh:actions"}
Switch on "Air Fresh - Switch Status" (G_airfresh) {channel="miio:basic:airfresh:on"}
Number fault "Device Fault" (G_airfresh) {channel="miio:basic:airfresh:fault"}
Number fan_level "Air Fresh - Fan Level" (G_airfresh) {channel="miio:basic:airfresh:fan_level"}
Switch heater "Heater" (G_airfresh) {channel="miio:basic:airfresh:heater"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airfresh) {channel="miio:basic:airfresh:filter_used_time"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airfresh) {channel="miio:basic:airfresh:filter_life_level"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airfresh) {channel="miio:basic:airfresh:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_airfresh) {channel="miio:basic:airfresh:alarm"}
Dimmer brightness "Indicator Light - Brightness" (G_airfresh) {channel="miio:basic:airfresh:brightness"}
Number motor_a_speed_rpm "Custom Service - Motor A Speed Rpm" (G_airfresh) {channel="miio:basic:airfresh:motor_a_speed_rpm"}
Number motor_b_speed_rpm "Custom Service - Motor B Speed Rpm" (G_airfresh) {channel="miio:basic:airfresh:motor_b_speed_rpm"}
Number:Temperature temperature "Custom Service - Temperature" (G_airfresh) {channel="miio:basic:airfresh:temperature"}

# Mi PM2.5 Air Quality Monitor (zhimi.airmonitor.v1) item file lines

note: Autogenerated example. Replace the id (airmonitor) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airmonitor "Mi PM2.5 Air Quality Monitor" <status>
Switch power "Power" (G_airmonitor) {channel="miio:basic:airmonitor:power"}
Number aqi "Air Quality Index" (G_airmonitor) {channel="miio:basic:airmonitor:aqi"}
Number battery "Battery" (G_airmonitor) {channel="miio:basic:airmonitor:battery"}
Switch usb_state "USB State" (G_airmonitor) {channel="miio:basic:airmonitor:usb_state"}
Switch time_state "Time State" (G_airmonitor) {channel="miio:basic:airmonitor:time_state"}
Switch night_state "Night State" (G_airmonitor) {channel="miio:basic:airmonitor:night_state"}
Number night_begin "Night Begin Time" (G_airmonitor) {channel="miio:basic:airmonitor:night_begin"}
Number night_end "Night End Time" (G_airmonitor) {channel="miio:basic:airmonitor:night_end"}

# Mi Air Purifier 3C (zhimi.airp.mb4a) item file lines

note: Autogenerated example. Replace the id (airp) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airp "Mi Air Purifier 3C" <status>
String actions "Actions" (G_airp) {channel="miio:basic:airp:actions"}
Switch on "Power" (G_airp) {channel="miio:basic:airp:on"}
String fault "Air Purifier - Device Fault" (G_airp) {channel="miio:basic:airp:fault"}
Number mode "Mode" (G_airp) {channel="miio:basic:airp:mode"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airp) {channel="miio:basic:airp:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airp) {channel="miio:basic:airp:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airp) {channel="miio:basic:airp:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airp) {channel="miio:basic:airp:alarm"}
Number brightness "Screen - Brightness" (G_airp) {channel="miio:basic:airp:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airp) {channel="miio:basic:airp:physical_controls_locked"}
Number moto_speed_rpm "Custom Service - Moto Speed Rpm" (G_airp) {channel="miio:basic:airp:moto_speed_rpm"}
String miio_lib_version "Custom Service - Miio Lib Version" (G_airp) {channel="miio:basic:airp:miio_lib_version"}
Number favorite_speed "Custom Service - Favorite Speed" (G_airp) {channel="miio:basic:airp:favorite_speed"}
Number:Time aqi_updata_heartbeat "Custom Service - Aqi Updata Heartbeat" (G_airp) {channel="miio:basic:airp:aqi_updata_heartbeat"}

# Mi Air Purifier 2 (mini) (zhimi.airpurifier.m1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2 (mini)" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier 2 (zhimi.airpurifier.m2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier 2S (zhimi.airpurifier.ma1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier 2S (zhimi.airpurifier.ma2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Dimmer bright "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:bright"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number purifyvolume "Purivied Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier 3 (zhimi.airpurifier.ma4) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 3" <status>
Number fault "Air Purifier - Device Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Air Purifier - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Air Purifier - Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan-level"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - Pm2.5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5-density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter-life-level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-used-time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch on1 "Indicator Light - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on1"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical-controls-locked"}
String button_pressed "Button - Button_pressed" (G_airpurifier) {channel="miio:basic:airpurifier:button-pressed"}
Number:Time filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-max-time"}
Number filter_hour_used_debug "Filter Time - Filter Hour Used Debug" (G_airpurifier) {channel="miio:basic:airpurifier:filter-hour-used-debug"}
Number m1_strong "Motor Speed - M1 Strong" (G_airpurifier) {channel="miio:basic:airpurifier:m1-strong"}
Number m1_high "Motor Speed - M1 High" (G_airpurifier) {channel="miio:basic:airpurifier:m1-high"}
Number m1_med "Motor Speed - M1 Med" (G_airpurifier) {channel="miio:basic:airpurifier:m1-med"}
Number m1_med_l "Motor Speed - M1 Med L" (G_airpurifier) {channel="miio:basic:airpurifier:m1-med-l"}
Number m1_low "Motor Speed - M1 Low" (G_airpurifier) {channel="miio:basic:airpurifier:m1-low"}
Number m1_silent "Motor Speed - M1 Silent" (G_airpurifier) {channel="miio:basic:airpurifier:m1-silent"}
Number m1_favorite "Motor Speed - M1 Favorite" (G_airpurifier) {channel="miio:basic:airpurifier:m1-favorite"}
Number motor1_speed "Motor Speed - Motor1 Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1-speed"}
Number motor1_set_speed "Motor Speed - Motor1 Set Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1-set-speed"}
Number favorite_fan_level "Motor Speed - Favorite Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite-fan-level"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use-time"}
Number:Volume purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify-volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi"}
Number average_aqi_cnt "Aqi - Average Aqi Cnt" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi-cnt"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-zone"}
String sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor-state"}
Number aqi_goodh "Aqi - Aqi Goodh" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-goodh"}
Number aqi_runstate "Aqi - Aqi Runstate" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-runstate"}
Number aqi_state "Aqi - Aqi State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-state"}
Number aqi_updata_heartbeat "Aqi - Aqi Updata Heartbeat" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-updata-heartbeat"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-factory-id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-product-id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-serial-num"}
Number app_extra "Others - App Extra" (G_airpurifier) {channel="miio:basic:airpurifier:app-extra"}
Number main_channel "Others - Main Channel" (G_airpurifier) {channel="miio:basic:airpurifier:main-channel"}
Number slave_channel "Others - Slave Channel" (G_airpurifier) {channel="miio:basic:airpurifier:slave-channel"}
String cola "Others - Cola" (G_airpurifier) {channel="miio:basic:airpurifier:cola"}
Switch buttom_door "Others - Buttom Door" (G_airpurifier) {channel="miio:basic:airpurifier:buttom-door"}
Number reboot_cause "Others - Reboot_cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot-cause"}
Number hw_version "Others - Hw Version" (G_airpurifier) {channel="miio:basic:airpurifier:hw-version"}
Number i2c_error_count "Others - I2c Error Count" (G_airpurifier) {channel="miio:basic:airpurifier:i2c-error-count"}
Number manual_level "Others - Manual Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual-level"}

# Mi Air Purifier 2S (zhimi.airpurifier.mb1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier 3/3H (zhimi.airpurifier.mb3) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 3/3H" <status>
Number fault "Air Purifier - Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Air Purifier - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Air Purifier - Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan-level"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - Pm2.5 density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5-density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter-life-level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-used-time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch on1 "Indicator Light - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on1"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical-controls-locked"}
String button_pressed "Button - Button Pressed" (G_airpurifier) {channel="miio:basic:airpurifier:button-pressed"}
Number filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter-max-time"}
Number filter_hour_debug "Filter Time - Filter Hour Debug" (G_airpurifier) {channel="miio:basic:airpurifier:filter-hour-debug"}
Number motor_strong "Motor Speed - Motor Strong" (G_airpurifier) {channel="miio:basic:airpurifier:motor-strong"}
Number motor_high "Motor Speed - Motor High" (G_airpurifier) {channel="miio:basic:airpurifier:motor-high"}
Number motor_med "Motor Speed - Motor Med" (G_airpurifier) {channel="miio:basic:airpurifier:motor-med"}
Number motor_med_l "Motor Speed - Motor Med L" (G_airpurifier) {channel="miio:basic:airpurifier:motor-med-l"}
Number motor_low "Motor Speed - Motor Low" (G_airpurifier) {channel="miio:basic:airpurifier:motor-low"}
Number motor_silent "Motor Speed - Motor Silent" (G_airpurifier) {channel="miio:basic:airpurifier:motor-silent"}
Number motor_favorite "Motor Speed - Motor Favorite" (G_airpurifier) {channel="miio:basic:airpurifier:motor-favorite"}
Number motor_speed "Motor Speed - Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor-speed"}
Number motor_set_speed "Motor Speed - Motor Set Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor-set-speed"}
Number favorite_fan_level "Motor Speed - Favorite Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite-fan-level"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use-time"}
Number:Volume purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify-volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi"}
Number average_aqi_cnt "Aqi - Average Aqi Cnt" (G_airpurifier) {channel="miio:basic:airpurifier:average-aqi-cnt"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-zone"}
String sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor-state"}
Number aqi_goodh "Aqi - Aqi Goodh" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-goodh"}
Number aqi_runstate "Aqi - Aqi Runstate" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-runstate"}
Number aqi_state "Aqi - Aqi State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-state"}
Number aqi_updata_heartbeat "Aqi - Aqi Updata Heartbeat" (G_airpurifier) {channel="miio:basic:airpurifier:aqi-updata-heartbeat"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-factory-id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-product-id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid-serial-num"}
Number app_extra "Others - App Extra" (G_airpurifier) {channel="miio:basic:airpurifier:app-extra"}
Number main_channel "Others - Main Channel" (G_airpurifier) {channel="miio:basic:airpurifier:main-channel"}
Number slave_channel "Others - Slave Channel" (G_airpurifier) {channel="miio:basic:airpurifier:slave-channel"}
String cola "Others - Cola" (G_airpurifier) {channel="miio:basic:airpurifier:cola"}
Switch buttom_door "Others - Buttom Door" (G_airpurifier) {channel="miio:basic:airpurifier:buttom-door"}
Number reboot_cause "Others - Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot-cause"}
Number hw_version "Others - Hw Version" (G_airpurifier) {channel="miio:basic:airpurifier:hw-version"}
Number iic_error_count "Others - Iic Error Count" (G_airpurifier) {channel="miio:basic:airpurifier:iic-error-count"}
Number manual_level "Others - Manual Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual-level"}
Number country_code "Others - National Code" (G_airpurifier) {channel="miio:basic:airpurifier:country-code"}

# Mi Air Purifier 3C (zhimi.airpurifier.mb4) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 3C" <status>
Switch on "Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
String fault "Air Purifier - Device Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Number mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - Pm2 5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "Screen - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number moto_speed_rpm "Custom Service - Moto Speed Rpm" (G_airpurifier) {channel="miio:basic:airpurifier:moto_speed_rpm"}
String miio_lib_version "Custom Service - Miio Lib Version" (G_airpurifier) {channel="miio:basic:airpurifier:miio_lib_version"}
Number favorite_speed "Custom Service - Favorite Speed" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_speed"}
Number:Time aqi_updata_heartbeat "Custom Service - Aqi Updata Heartbeat" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_updata_heartbeat"}

# Mi Air Purifier 2S (zhimi.airpurifier.mc1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2S" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier 2H (zhimi.airpurifier.mc2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier 2H" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier Super (zhimi.airpurifier.sa1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Super" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier MAX / MAX Pro (zhimi.airpurifier.sa2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier MAX / MAX Pro" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier v1 (zhimi.airpurifier.v1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v1" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier v2 (zhimi.airpurifier.v2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v2" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier v3 (zhimi.airpurifier.v3) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v3" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier v5 (zhimi.airpurifier.v5) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier v5" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Switch buzzer "Buzzer Status" (G_airpurifier) {channel="miio:basic:airpurifier:buzzer"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Volume purifyvolume "Purified Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier Pro v6 (zhimi.airpurifier.v6) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Pro v6" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Dimmer bright "LED Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:bright"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number:Time usedhours "Run Time" (G_airpurifier) {channel="miio:basic:airpurifier:usedhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number purifyvolume "Purivied Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purifyvolume"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier Pro v7 (zhimi.airpurifier.v7) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Pro v7" <status>
Switch power "Power" (G_airpurifier) {channel="miio:basic:airpurifier:power"}
String mode "Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number:Dimensionless humidity "Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:humidity"}
Number aqi "Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:aqi"}
Number averageaqi "Average Air Quality Index" (G_airpurifier) {channel="miio:basic:airpurifier:averageaqi"}
Number volume "Volume" (G_airpurifier) {channel="miio:basic:airpurifier:volume"}
Switch led "LED Status" (G_airpurifier) {channel="miio:basic:airpurifier:led"}
Number illuminance "Illuminance" (G_airpurifier) {channel="miio:basic:airpurifier:illuminance"}
Number filtermaxlife "Filter Max Life" (G_airpurifier) {channel="miio:basic:airpurifier:filtermaxlife"}
Number:Time filterhours "Filter Hours used" (G_airpurifier) {channel="miio:basic:airpurifier:filterhours"}
Number motorspeed "Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed"}
Number motorspeed2 "Motor Speed 2" (G_airpurifier) {channel="miio:basic:airpurifier:motorspeed2"}
Number filterlife "Filter Life" (G_airpurifier) {channel="miio:basic:airpurifier:filterlife"}
Number favoritelevel "Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favoritelevel"}
Number:Temperature temperature "Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Switch childlock "Child Lock" (G_airpurifier) {channel="miio:basic:airpurifier:childlock"}

# Mi Air Purifier Pro H (zhimi.airpurifier.vb2) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Mi Air Purifier Pro H" <status>
String actions "Actions" (G_airpurifier) {channel="miio:basic:airpurifier:actions"}
Number fault "Air Purifier - Device Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Switch on "Air Purifier - Power" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fan_level "Air Purifier - Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:fan_level"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number:Dimensionless volume "Alarm - Volume" (G_airpurifier) {channel="miio:basic:airpurifier:volume"}
Number brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch on1 "Indicator Light - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on1"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
String button_pressed "Button - Button_pressed" (G_airpurifier) {channel="miio:basic:airpurifier:button_pressed"}
Number:Time filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Number:Time filter_hour_used_debug "Filter Time - Filter Hour Used Debug" (G_airpurifier) {channel="miio:basic:airpurifier:filter_hour_used_debug"}
Number m1_strong "Motor Speed - M1 Strong" (G_airpurifier) {channel="miio:basic:airpurifier:m1_strong"}
Number m1_high "Motor Speed - M1 High" (G_airpurifier) {channel="miio:basic:airpurifier:m1_high"}
Number m1_med "Motor Speed - M1 Med" (G_airpurifier) {channel="miio:basic:airpurifier:m1_med"}
Number m1_med_l "Motor Speed - M1 Med L" (G_airpurifier) {channel="miio:basic:airpurifier:m1_med_l"}
Number m1_low "Motor Speed - M1 Low" (G_airpurifier) {channel="miio:basic:airpurifier:m1_low"}
Number m1_silent "Motor Speed - M1 Silent" (G_airpurifier) {channel="miio:basic:airpurifier:m1_silent"}
Number m1_favorite "Motor Speed - M1 Favorite" (G_airpurifier) {channel="miio:basic:airpurifier:m1_favorite"}
Number motor1_speed "Motor Speed - Motor1 Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1_speed"}
Number motor1_set_speed "Motor Speed - Motor1 Set Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor1_set_speed"}
Number favorite_level "Motor Speed - Favorite Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_level"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
Number average_aqi_cnt "Aqi - Average_aqi Read Times" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi_cnt"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_zone"}
Number sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor_state"}
Number aqi_goodh "Aqi - Aqi Goodh" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_goodh"}
Number aqi_runstate "Aqi - Runstate" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_runstate"}
Number aqi_state "Aqi - Aqi State" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_state"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_factory_id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_product_id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_serial_num"}
Number app_extra "Others - App Extra" (G_airpurifier) {channel="miio:basic:airpurifier:app_extra"}
Number main_channel "Others - Main Channel" (G_airpurifier) {channel="miio:basic:airpurifier:main_channel"}
Number slave_channel "Others - Slave Channel" (G_airpurifier) {channel="miio:basic:airpurifier:slave_channel"}
String cola "Others - Cola" (G_airpurifier) {channel="miio:basic:airpurifier:cola"}
String buttom_door "Others - Buttom Door" (G_airpurifier) {channel="miio:basic:airpurifier:buttom_door"}
Number reboot_cause "Others - Reboot_cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number manual_level "Others - Manual Level" (G_airpurifier) {channel="miio:basic:airpurifier:manual_level"}
Number:Time powertime "Others - Powertime" (G_airpurifier) {channel="miio:basic:airpurifier:powertime"}
Number country_code "Others - Country Code" (G_airpurifier) {channel="miio:basic:airpurifier:country_code"}

# Smartmi Air Purifier (zhimi.airpurifier.za1) item file lines

note: Autogenerated example. Replace the id (airpurifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_airpurifier "Smartmi Air Purifier" <status>
Switch on "Air Purifier - Switch Status" (G_airpurifier) {channel="miio:basic:airpurifier:on"}
Number fault "Air Purifier - Fault" (G_airpurifier) {channel="miio:basic:airpurifier:fault"}
Number mode "Air Purifier - Mode" (G_airpurifier) {channel="miio:basic:airpurifier:mode"}
Number air_quality "Environment - Air Quality" (G_airpurifier) {channel="miio:basic:airpurifier:air_quality"}
Number pm2_5_density "Environment - PM2 5 Density" (G_airpurifier) {channel="miio:basic:airpurifier:pm2_5_density"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_airpurifier) {channel="miio:basic:airpurifier:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_airpurifier) {channel="miio:basic:airpurifier:temperature"}
Number:Dimensionless filter_life_level "Filter - Filter Life Level" (G_airpurifier) {channel="miio:basic:airpurifier:filter_life_level"}
Number:Time filter_used_time "Filter - Filter Used Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_used_time"}
Switch alarm "Alarm - Alarm" (G_airpurifier) {channel="miio:basic:airpurifier:alarm"}
Number brightness "Indicator Light - Brightness" (G_airpurifier) {channel="miio:basic:airpurifier:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_airpurifier) {channel="miio:basic:airpurifier:physical_controls_locked"}
Number:Time filter_max_time "Filter Time - Filter Max Time" (G_airpurifier) {channel="miio:basic:airpurifier:filter_max_time"}
Number favorite_fan_level "Motor Speed - Favorite Fan Level" (G_airpurifier) {channel="miio:basic:airpurifier:favorite_fan_level"}
Number motor_speed "Motor Speed - Motor Speed" (G_airpurifier) {channel="miio:basic:airpurifier:motor_speed"}
Number:Time use_time "Use Time - Use Time" (G_airpurifier) {channel="miio:basic:airpurifier:use_time"}
Number purify_volume "Aqi - Purify Volume" (G_airpurifier) {channel="miio:basic:airpurifier:purify_volume"}
Number average_aqi "Aqi - Average Aqi" (G_airpurifier) {channel="miio:basic:airpurifier:average_aqi"}
String aqi_zone "Aqi - Aqi Zone" (G_airpurifier) {channel="miio:basic:airpurifier:aqi_zone"}
Number sensor_state "Aqi - Sensor State" (G_airpurifier) {channel="miio:basic:airpurifier:sensor_state"}
String rfid_tag "Rfid - Rfid Tag" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_tag"}
String rfid_factory_id "Rfid - Rfid Factory Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_factory_id"}
String rfid_product_id "Rfid - Rfid Product Id" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_product_id"}
String rfid_time "Rfid - Rfid Time" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_time"}
String rfid_serial_num "Rfid - Rfid Serial Num" (G_airpurifier) {channel="miio:basic:airpurifier:rfid_serial_num"}
Number reboot_cause "Others - Reboot Cause" (G_airpurifier) {channel="miio:basic:airpurifier:reboot_cause"}
Number hw_version "Others - Hw Version" (G_airpurifier) {channel="miio:basic:airpurifier:hw_version"}
Number sgp_ethanol "Others - Sgp Ethanol" (G_airpurifier) {channel="miio:basic:airpurifier:sgp_ethanol"}
Number sgp_serial "Others - Sgp Serial" (G_airpurifier) {channel="miio:basic:airpurifier:sgp_serial"}
String sgp_version "Others - Sgp Version" (G_airpurifier) {channel="miio:basic:airpurifier:sgp_version"}
Number country_code "Others - Country Code" (G_airpurifier) {channel="miio:basic:airpurifier:country_code"}
Switch gesture_status "Others - Gesture Status" (G_airpurifier) {channel="miio:basic:airpurifier:gesture_status"}

# Mi Standing Fan (zhimi.fan.sa1) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Standing Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

# Mi Smart Fan (zhimi.fan.v1) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Mi Smart Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Number temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge" (G_fan) {channel="miio:basic:fan:mode"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

# Smartmi DC Pedestal Fan (zhimi.fan.v2) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi DC Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Number temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge" (G_fan) {channel="miio:basic:fan:mode"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

# Smartmi DC Pedestal Fan (zhimi.fan.v3) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi DC Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Number temp_dec "Temperature" (G_fan) {channel="miio:basic:fan:temp_dec"}
Number:Dimensionless humidity "Humidity" (G_fan) {channel="miio:basic:fan:humidity"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String mode "Battery Charge" (G_fan) {channel="miio:basic:fan:mode"}
Number battery "Battery" (G_fan) {channel="miio:basic:fan:battery"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

# Smartmi Inverter Pedestal Fan (zhimi.fan.za1) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Inverter Pedestal Fan" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number:Angle angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number:Time poweroffTime "Power-Off Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Switch buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Dimmer speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Dimmer naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
Switch acPower "AC Power" (G_fan) {channel="miio:basic:fan:acPower"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

# Smartmi Standing Fan 2 (zhimi.fan.za3) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Standing Fan 2" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number poweroffTime "Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Number buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

# Smartmi Standing Fan 2S (zhimi.fan.za4) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Standing Fan 2S" <status>
Switch power "Power" (G_fan) {channel="miio:basic:fan:power"}
Switch angleEnable "Rotation" (G_fan) {channel="miio:basic:fan:angleEnable"}
Number:Time usedhours "Run Time" (G_fan) {channel="miio:basic:fan:usedhours"}
Number angle "Angle" (G_fan) {channel="miio:basic:fan:angle"}
Number poweroffTime "Timer" (G_fan) {channel="miio:basic:fan:poweroffTime"}
Number buzzer "Buzzer" (G_fan) {channel="miio:basic:fan:buzzer"}
Number led_b "LED" (G_fan) {channel="miio:basic:fan:led_b"}
Switch child_lock "Child Lock" (G_fan) {channel="miio:basic:fan:child_lock"}
Number speedLevel "Speed Level" (G_fan) {channel="miio:basic:fan:speedLevel"}
Number speed "Speed" (G_fan) {channel="miio:basic:fan:speed"}
Number naturalLevel "Natural Level" (G_fan) {channel="miio:basic:fan:naturalLevel"}
String move "Move Direction" (G_fan) {channel="miio:basic:fan:move"}

# Smartmi Standing Fan 3 (zhimi.fan.za5) item file lines

note: Autogenerated example. Replace the id (fan) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_fan "Smartmi Standing Fan 3 " <status>
Switch on "Fan - Power" (G_fan) {channel="miio:basic:fan:on"}
Number fan_level "Fan - Fan Level" (G_fan) {channel="miio:basic:fan:fan_level"}
Switch horizontal_swing "Fan - Horizontal Swing" (G_fan) {channel="miio:basic:fan:horizontal_swing"}
Number horizontal_angle "Fan - Horizontal Angle" (G_fan) {channel="miio:basic:fan:horizontal_angle"}
Number mode "Fan - Mode" (G_fan) {channel="miio:basic:fan:mode"}
Number off_delay "Fan - Power Off Delay" (G_fan) {channel="miio:basic:fan:off_delay"}
Switch anion "Fan - Anion" (G_fan) {channel="miio:basic:fan:anion"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_fan) {channel="miio:basic:fan:physical_controls_locked"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_fan) {channel="miio:basic:fan:brightness"}
Switch alarm "Alarm - Alarm" (G_fan) {channel="miio:basic:fan:alarm"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_fan) {channel="miio:basic:fan:relative_humidity"}
Number:Temperature temperature "Environment - Temperature" (G_fan) {channel="miio:basic:fan:temperature"}
Number button_press "Custom Service - Button Press" (G_fan) {channel="miio:basic:fan:button_press"}
Switch battery_state "Custom Service - Battery State" (G_fan) {channel="miio:basic:fan:battery_state"}
Number speed_now "Custom Service - Speed Now" (G_fan) {channel="miio:basic:fan:speed_now"}
Switch ac_state "Custom Service - Ac State" (G_fan) {channel="miio:basic:fan:ac_state"}
Number:Dimensionless speed_level "Custom Service - Speed Level" (G_fan) {channel="miio:basic:fan:speed_level"}

# Mi Smart Space Heater S (zhimi.heater.ma2) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Mi Smart Space Heater S" <status>
Switch on "Heater - Switch Status" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch hw_enable "Private Service - Hw Enable" (G_heater) {channel="miio:basic:heater:hw_enable"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}

# Mi Smart Baseboard Heater E (zhimi.heater.ma3) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Mi Smart Baseboard Heater E" <status>
String actions "Actions" (G_heater) {channel="miio:basic:heater:actions"}
Switch on "Heater - Switch Status" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Dimensionless brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}

# Mi Smart Space Heater S (zhimi.heater.mc2) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Mi Smart Space Heater S" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch hw_enable "Private Service - Hw Enable" (G_heater) {channel="miio:basic:heater:hw_enable"}
Number:Time use_time "Private Service - Use Time" (G_heater) {channel="miio:basic:heater:use_time"}
Number country_code "Private Service - Country Code" (G_heater) {channel="miio:basic:heater:country_code"}

# Smartmi Smart Fan (zhimi.heater.na1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Fan" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number heat_level "Heater - Heat Level" (G_heater) {channel="miio:basic:heater:heat_level"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch return_to_middle "Private Service - Return To Middle" (G_heater) {channel="miio:basic:heater:return_to_middle"}

# Smartmi Smart Fan Heater (zhimi.heater.nb1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Fan Heater" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number heat_level "Heater - Heat Level" (G_heater) {channel="miio:basic:heater:heat_level"}
Number mode "Heater - Mode" (G_heater) {channel="miio:basic:heater:mode"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown_time"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Control Locked" (G_heater) {channel="miio:basic:heater:physical_controls_locked"}
Switch return_to_middle "Private Service - Return To Middle" (G_heater) {channel="miio:basic:heater:return_to_middle"}
Number country_code "Private Service - Country Code" (G_heater) {channel="miio:basic:heater:country_code"}
Switch hw_en "Private Service - Hw En" (G_heater) {channel="miio:basic:heater:hw_en"}

# Smartmi Radiant Heater Smart Version (zhimi.heater.za1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Radiant Heater Smart Version" <status>
Switch power "Power" (G_heater) {channel="miio:basic:heater:power"}
Number:Temperature target_temperature "Target Temperature" (G_heater) {channel="miio:basic:heater:target_temperature"}
Dimmer brightness "Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch buzzer "Buzzer Status" (G_heater) {channel="miio:basic:heater:buzzer"}
Number:Dimensionless relative_humidity "Relative Humidity" (G_heater) {channel="miio:basic:heater:relative_humidity"}
Switch childlock "Child Lock" (G_heater) {channel="miio:basic:heater:childlock"}
Switch HWSwitch "HW Switch" (G_heater) {channel="miio:basic:heater:HWSwitch"}
Number:Temperature temperature "Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number:Time usedhours "Run Time" (G_heater) {channel="miio:basic:heater:usedhours"}

# Smartmi Smart Convector Heater 1S (zhimi.heater.za2) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Convector Heater 1S" <status>
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target-temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown-time"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_heater) {channel="miio:basic:heater:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Controls Locked" (G_heater) {channel="miio:basic:heater:physical-controls-locked"}
Number:Time use_time "Private-Service - Use Time" (G_heater) {channel="miio:basic:heater:use-time"}

# Smartmi Smart Convector Heater 1S (zhimi.heater.zb1) item file lines

note: Autogenerated example. Replace the id (heater) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_heater "Smartmi Smart Convector Heater 1S" <status>
Switch on "Heater - Power" (G_heater) {channel="miio:basic:heater:on"}
Number fault "Heater - Device Fault" (G_heater) {channel="miio:basic:heater:fault"}
Number:Temperature target_temperature "Heater - Target Temperature" (G_heater) {channel="miio:basic:heater:target-temperature"}
Switch alarm "Alarm - Alarm" (G_heater) {channel="miio:basic:heater:alarm"}
Number:Time countdown_time "Countdown - Countdown Time" (G_heater) {channel="miio:basic:heater:countdown-time"}
Number:Dimensionless relative_humidity "Environment - Relative Humidity" (G_heater) {channel="miio:basic:heater:relative-humidity"}
Number:Temperature temperature "Environment - Temperature" (G_heater) {channel="miio:basic:heater:temperature"}
Number brightness "Indicator Light - Brightness" (G_heater) {channel="miio:basic:heater:brightness"}
Switch physical_controls_locked "Physical Control Locked - Physical Controls Locked" (G_heater) {channel="miio:basic:heater:physical-controls-locked"}
Number:Time use_time "Private-Service - Use Time" (G_heater) {channel="miio:basic:heater:use-time"}
Number country_code "Private-Service - Country-Code" (G_heater) {channel="miio:basic:heater:country-code"}

# Smartmi Evaporative Humidifier (zhimi.humidifier.ca1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Number aqi "Air Quality Index" (G_humidifier) {channel="miio:basic:humidifier:aqi"}
Number translevel "Trans_level" (G_humidifier) {channel="miio:basic:humidifier:translevel"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

# Smartmi Evaporative Humidifer 2 (zhimi.humidifier.ca4) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifer 2" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
Number mode "Mode - Fan Level" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number Fault "Humidifier Device Fault" (G_humidifier) {channel="miio:basic:humidifier:Fault"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless targetHumidity "Target Humidity" (G_humidifier) {channel="miio:basic:humidifier:targetHumidity"}
Number waterlevel "Water Level" (G_humidifier) {channel="miio:basic:humidifier:waterlevel"}
Number bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number:Time powerhours "Power Time" (G_humidifier) {channel="miio:basic:humidifier:powerhours"}
Number targetmotorspeed "Target Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:targetmotorspeed"}
Number actualmotorspeed "Actual Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:actualmotorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}
Number ButtonPressed "Button Pressed" (G_humidifier) {channel="miio:basic:humidifier:ButtonPressed"}
Switch clean "Clean Mode" (G_humidifier) {channel="miio:basic:humidifier:clean"}

# Smartmi Evaporative Humidifier (zhimi.humidifier.cb1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String humidifierMode "Humidifier Mode" (G_humidifier) {channel="miio:basic:humidifier:humidifierMode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

# Smartmi Evaporative Humidifier (zhimi.humidifier.cb2) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Evaporative Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String humidifierMode "Humidifier Mode" (G_humidifier) {channel="miio:basic:humidifier:humidifierMode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number:Dimensionless setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

# Smartmi Humidifier (zhimi.humidifier.v1) item file lines

note: Autogenerated example. Replace the id (humidifier) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_humidifier "Smartmi Humidifier" <status>
Switch power "Power" (G_humidifier) {channel="miio:basic:humidifier:power"}
String mode "Mode" (G_humidifier) {channel="miio:basic:humidifier:mode"}
Number:Dimensionless humidity "Humidity" (G_humidifier) {channel="miio:basic:humidifier:humidity"}
Number setHumidity "Humidity Set" (G_humidifier) {channel="miio:basic:humidifier:setHumidity"}
Number aqi "Air Quality Index" (G_humidifier) {channel="miio:basic:humidifier:aqi"}
Number translevel "Trans_level" (G_humidifier) {channel="miio:basic:humidifier:translevel"}
Dimmer bright "LED Brightness" (G_humidifier) {channel="miio:basic:humidifier:bright"}
Switch buzzer "Buzzer Status" (G_humidifier) {channel="miio:basic:humidifier:buzzer"}
Number depth "Depth" (G_humidifier) {channel="miio:basic:humidifier:depth"}
Switch dry "Dry" (G_humidifier) {channel="miio:basic:humidifier:dry"}
Number:Time usedhours "Run Time" (G_humidifier) {channel="miio:basic:humidifier:usedhours"}
Number motorspeed "Motor Speed" (G_humidifier) {channel="miio:basic:humidifier:motorspeed"}
Number:Temperature temperature "Temperature" (G_humidifier) {channel="miio:basic:humidifier:temperature"}
Switch childlock "Child Lock" (G_humidifier) {channel="miio:basic:humidifier:childlock"}

# Mi Smart Power Strip (zimi.powerstrip.v2) item file lines

note: Autogenerated example. Replace the id (powerstrip) in the channel with your own. Replace basic with generic in the thing UID depending on how your thing was discovered.

Group G_powerstrip "Mi Smart Power Strip" <status>
Switch power "Power" (G_powerstrip) {channel="miio:basic:powerstrip:power"}
Number powerUsage "Power Consumption" (G_powerstrip) {channel="miio:basic:powerstrip:powerUsage"}
Switch led "wifi LED" (G_powerstrip) {channel="miio:basic:powerstrip:led"}
Number power_price "power_price" (G_powerstrip) {channel="miio:basic:powerstrip:power_price"}
Number current "Current" (G_powerstrip) {channel="miio:basic:powerstrip:current"}
Number:Temperature temperature "Temperature" (G_powerstrip) {channel="miio:basic:powerstrip:temperature"}
Number lp_autooff "Low Power Auto Off" (G_powerstrip) {channel="miio:basic:powerstrip:lp_autooff"}
Number lp_autooff_delay "Low Power Limit Time" (G_powerstrip) {channel="miio:basic:powerstrip:lp_autooff_delay"}
Number lp_threshold "Low Power Threshold" (G_powerstrip) {channel="miio:basic:powerstrip:lp_threshold"}

# Country Servers

Known country Servers: cn, de, i2, ru, sg, us

Mapping of countries in mihome app to server:

Country Country Code Server
Afghanistan AF sg
Albania AL de
Algeria DZ sg
American Samoa AS sg
Andorra AD de
Angola AO sg
Anguilla AI us
Antarctica AQ sg
Antigua and Barbuda AG us
Argentina AR us
Armenia AM sg
Aruba AW us
Ascension Island AC sg
Australia AU sg
Austria AT de
Azerbaijan AZ sg
Bahamas BS us
Bahrain BH sg
Bangladesh BD sg
Barbados BB us
Belarus BY de
Belgium BE de
Belize BZ us
Benin BJ sg
Bermuda BM us
Bhutan BT sg
Bolivia BO us
Bosnia and Herzegovina BA de
Botswana BW sg
Bouvet Island BV sg
Brazil BR us
British Indian Ocean Territory IO sg
British Virgin Islands VG us
Brunei BN sg
Bulgaria BG de
Burkina Faso BF sg
Burundi BI sg
Cambodia KH sg
Cameroon CM sg
Canada CA us
Canary Islands IC sg
Cape Verde CV sg
Cayman Islands KY us
Central African Republic CF sg
Ceuta and Melilla EA de
Chad TD sg
Chile CL us
Chinese mainland CN cn
Christmas Island CX sg
Cocos Islands CC sg
Colombia CO us
Comoros KM sg
Congo - Brazzaville CG sg
Congo - Kinshasa CD sg
Cook Islands CK sg
Costa Rica CR us
Croatia HR de
Curaçao CW us
Cyprus CY de
Czechia CZ de
Côte d'Ivoire CI sg
Denmark DK de
Diego Garcia DG sg
Djibouti DJ sg
Dominica DM us
Dominican Republic DO us
Dutch Caribbean BQ us
Ecuador EC us
Egypt EG sg
El Salvador SV us
Equatorial Guinea GQ sg
Eritrea ER sg
Estonia EE de
Ethiopia ET sg
Falkland Islands FK us
Faroe Islands FO de
Fiji FJ sg
Finland FI de
France FR de
French Guiana GF de
French Southern Territories TF sg
French polynesia PF sg
Gabon GA sg
Gambia GM sg
Georgia GE sg
Germany DE de
Ghana GH sg
Gibraltar GI de
Greece GR de
Greenland GL us
Grenada GD us
Guadeloupe GP us
Guam GU sg
Guatemala GT us
Guernsey GG de
Guinea GN sg
Guinea-Bissau GW sg
Guyana GY us
Haiti HT us
Honduras HN us
Hong Kong HK sg
Hungary HU de
Iceland IS de
India IN i2
Indonesia ID sg
Iraq IQ sg
Ireland IE de
Isle of Man IM de
Israel IL sg
Italy IT de
Jamaica JM us
Japan JP sg
Jersey JE de
Jordan JO sg
Kazakhstan KZ sg
Kenya KE sg
Kiribati KI sg
Kosovo XK de
Kuwait KW sg
Kyrgyzstan KG sg
Laos LA sg
Latvia LV de
Lebanon LB sg
Lesotho LS sg
Liberia LR sg
Libya LY sg
Liechtenstein LI de
Lithuania LT de
Luxembourg LU de
Macao MO sg
Macedonia MK de
Madagascar MG sg
Malawi MW sg
Malaysia MY sg
Maldives MV sg
Mali ML sg
Malta MT de
Marshall islands MH sg
Martinique MQ us
Mauritania MR sg
Mauritius MU sg
Mayotte YT sg
Mexico MX us
Micronesia FM sg
Moldova MD de
Monaco MC de
Mongolia MN sg
Montenegro ME de
Montserrat MS us
Morocco MA sg
Mozambique MZ sg
Myanmar (Burma) MM sg
Namibia NA sg
Nauru NR sg
Nepal NP sg
Netherlands NL de
New Caledonia NC sg
New Zealand NZ sg
Nicaragua NI us
Niger NE sg
Nigeria NG sg
Niue NU sg
Norfolk Island NF sg
Northern Mariana Islands MP sg
Norway NO de
Oman OM sg
Pakistan PK sg
Palau PW sg
Palestinian Territories PS sg
Panama PA us
Papua New Guinea PG sg
Paraguay PY us
Peru PE us
Philippines PH sg
Pitcairn Islands PN sg
Poland PL de
Portugal PT de
Puerto Rico PR us
Qatar QA sg
Romania RO de
Russia RU ru
Rwanda RW sg
Réunion RE sg
Saint Barthélemy BL us
Saint Helena SH sg
Saint Kitts and Nevis KN us
Saint Lucia LC us
Saint Martin MF de
Saint Pierre and Miquelon PM us
Saint Vincent and The Grenadines VC us
Samoa WS sg
San Marino SM de
Saudi Arabia SA sg
Senegal SN sg
Serbia RS de
Seychelles SC sg
Sierra Leone SL sg
Singapore SG sg
Slovakia SK de
Slovenia SI de
Solomon Islands SB sg
Somalia SO sg
South Africa ZA sg
South Georgia and South Sandwich Islands GS us
South Korea KR sg
South Sudan SS sg
Spain ES de
Sri Lanka LK sg
Suriname SR us
Svalbard and Jan Mayen SJ de
Swaziland SZ sg
Sweden SE de
Switzerland CH de
São Tomé and Príncipe ST sg
Taiwan TW sg
Tajikistan TJ sg
Tanzania TZ sg
Thailand TH sg
Timor-Leste TL sg
Togo TG sg
Tokelau TK sg
Tonga TO sg
Trinidad and Tobago TT us
Tristan da Cunha TA sg
Tunisia TN sg
Turkey TR sg
Turkmenistan TM sg
Turks and Caicos Islands TC us
Tuvalu TV sg
U.S. Virgin Islands VI us
Uganda UG sg
Ukraine UA de
United Arab Emirates AE sg
United Kingdom GB de
United States US us
United States Minor Outlying Islands UM us
Uruguay UY us
Uzbekistan UZ sg
Vanuatu VU sg
Vatican VA de
Vietnam VN sg
Wallis and Futuna WF sg
Western Sahara EH sg
Yemen YE sg
Zambia ZM sg
Zimbabwe ZW sg
Åland Islands AX de