This page is part of archived documentation for openHAB 3.3. Go to the current stable version

# UniFi Binding

This binding integrates with Ubiquiti UniFi Networks (opens new window) allowing for presence detection of network clients.

# Supported Things

controller - An instance of the UniFi controller software
site - A site thing with connection statistics
wlan - A wireless network thing. Control Wi-Fi network and easy access to access.
wirelessClient - Any wireless client connected to a UniFi wireless network
wiredClient - A wired client connected to the UniFi network
poePort - A PoE (Power over Ethernet) port on a UniFi switch

# Discovery

The binding supports discovery of things connected to a UniFi controller (Bridge). To discover things start the discovery process manually.

# Binding Configuration

The binding has no configuration options, all configuration is done at the Bridge and Thing levels.

# Bridge Configuration

You need at least one UniFi Controller (Bridge) for this binding to work. It requires a network accessible instance of the Ubiquiti Networks Controller Software (opens new window).

The following table describes the Bridge configuration parameters:

Parameter	Description	Config	Default
host	Hostname of IP address of the UniFi Controller	Required	-
port	Port of the UniFi Controller. For UniFi OS, the default port is usually 443	Required	-
unifios	If the UniFi Controller is running on UniFi OS	Required	false
username	The username to access the UniFi Controller	Required	-
password	The password to access the UniFi Controller	Required	-
refresh	Refresh interval in seconds	Optional	10

# Thing Configuration

You must define a UniFi Controller (Bridge) before defining UniFi Things for this binding to work.

# `site`

The following table describes the site configuration parameters:

Parameter	Description	Config	Default
sid	The name, description or id of the site	Required	-

# `wlan`

The following table describes the wlan configuration parameters:

Parameter	Description	Config	Default
wid	The name or id of the WLAN	Required	-

# `wirelessClient` & `wiredClient`

The following table describes the wirelessClient & wiredClient configuration parameters:

Parameter	Description	Config	Default
cid	The MAC address, IP address, hostname or alias of the client	Required	-
site	The site where the client should be found	Optional	-
considerHome	The interval in seconds to consider the client as home	Optional	180

Here's some additional notes regarding the thing configuration parameters:

# `cid`

The cid parameter is a universal "client identifier". It accepts the following values:

MAC address [highest priority]
IP address
Hostname (as show by the controller)
Alias (as defined by you in the controller UI) [lowest priority]

The priority essentially means the binding attempts to lookup by MAC address, then by IP address, then by hostname and finally by alias. Once it finds a matching client, it short circuits and stops searching. Most of the time, you will simply use the MAC address.

# `site`

The site parameter is optional. If you leave it blank, the client will appear ONLINE if found in any site defined on the controller.

You may use the site parameter as a filter if you only want the client to appear home if it is found in the site defined in the site parameter.

Additionally, you may use friendly site names as they appear in the controller UI.

# `considerHome`

The considerHome parameter allows you to control how quickly the binding marks a client as away. For example, using the default of 180 (seconds), the binding will report a client away as soon as lastSeen + 180 (seconds) < now.

# `poePort`

The following table describes the poePort configuration parameters:

Parameter	Description	Config
portNumber	The port number as reported by the switch (starts with 1)	Required
macAddress	The MAC address of the switch device the port is part of	Required

# Channels

# `site`

The site information that is retrieved is available as these channels:

Channel ID	Item Type	Description	Permissions
totalClients	Number	Total number of clients connected	Read
wirelessClients	Number	Number of wireless clients connected	Read
wiredClients	Number	Number of wired clients connected	Read
guestClients	Number	Number of guest clients connected	Read

# `wlan`

The wlan information that is retrieved is available as these channels:

Channel ID	Item Type	Description	Permissions
enable	Switch	Enable status of the WLAN	Read, Write
wirelessClients	Number	Number of wireless clients connected	Read
guestClients	Number	Number of guest clients connected	Read
essid	String	Wireless Network (ESSID)	Read
site	String	UniFi Site the client is associated with	Read
security	String	Security protocol of the Wi-Fi network	Read
wlanBand	String	Wireless LAN band of the Wi-Fi network	Read
wpaEnc	String	WPA Encoding of the Wi-Fi network	Read
wpaMode	String	WPA Mode of the Wi-Fi network	Read
passphrase	String	Passphrase of the Wi-Fi network	Read
qrcodeEncoding	String	MECARD like encoding to generate a QR Code for easy access to the Wi-Fi network	Read

Attention

If you link an item to the passphrase or qrcodeEncoding channel your Wi-Fi password will be exposed in openHAB. The password will also be visible in openHAB event log.

The qrcodeEncoding channel can be used to easily create a QR Code to access, for example, a guest network. It contains a MECARD like representation of the access. This is the notation used in QR Codes that can be scanned by mobile phones.

# `wirelessClient`

The wirelessClient information that is retrieved is available as these channels:

Channel ID	Item Type	Description	Permissions
online	Switch	Online status of the client	Read
site	String	Site name (from the controller web UI) the client is associated with	Read
macAddress	String	MAC address of the client	Read
ipAddress	String	IP address of the client	Read
guest	Switch	On if this is a guest client	Read
ap	String	Access point (AP) the client is connected to	Read
essid	String	Network name (ESSID) the client is connected to	Read
rssi	Number	Received signal strength indicator (RSSI) of the client	Read
uptime	Number	Uptime of the client (in seconds)	Read
lastSeen	DateTime	Date and Time the client was last seen	Read
experience	Number:Dimensionless	Overall health indication of the client (in percentage)	Read
blocked	Switch	Blocked status of the client	Read, Write
cmd	String	Command channel: `reconnect` to force the client to reconnect	Write
reconnect	Switch	Force the client to reconnect	Write

Note: All channels with the Write permission require administrator credentials as defined in the controller.

# `wiredClient`

The wiredClient information that is retrieved is available as these channels:

Channel ID	Item Type	Description	Permissions
online	Switch	Online status of the client	Read
site	String	Site name (from the controller web UI) the client is associated with	Read
macAddress	String	MAC address of the client	Read
ipAddress	String	IP address of the client	Read
uptime	Number	Uptime of the client (in seconds)	Read
lastSeen	DateTime	Date and Time the client was last seen	Read
experience	Number:Dimensionless	Overall health indication of the client (in percentage)	Read
blocked	Switch	Blocked status of the client	Read, Write

# `blocked`

The blocked channel allows you to block / unblock a client via the controller.

# `reconnect`

The reconnect channel allows you to force a client to reconnect. Sending ON to this channel will trigger a reconnect via the controller.

# `poePort`

The poePort information that is retrieved is available as these channels:

Channel ID	Item Type	Description	Permissions
online	Switch	Online status of the port	Read
mode	Selection	Select the PoE mode: off, auto, 24v or passthrough	Read, Write
enable	Switch	Enable Power over Ethernet	Read, Write
cmd	String	Command channel: `power-cycle`: Power Cycle port	Write
power	Number:Power	Power consumption of the port in Watt	Read
voltage	Number:ElectricPotential	Voltage of the port in Volt	Read
current	Number:ElectricCurrent	Current used by the port in mA	Read

The enable switch channel has a configuration parameter mode which is the value used to switch PoE on when the channel is switched to ON. The default mode value is auto.

# Full Example

things/unifi.things

Bridge unifi:controller:home "UniFi Controller" [ host="unifi", port=8443, unifios=false, username="$username", password="$password", refresh=10 ] {
	Thing wirelessClient matthewsPhone "Matthew's iPhone" [ cid="$cid", site="default", considerHome=180 ]
}

Note: Usually on Unifi OS, the default port is 443

Replace $user, $password and $cid accordingly.

items/unifi.items

Switch   MatthewsPhone           "Matthew's iPhone [MAP(unifi.map):%s]"             { channel="unifi:wirelessClient:home:matthewsPhone:online" }
String   MatthewsPhoneSite       "Matthew's iPhone: Site [%s]"                      { channel="unifi:wirelessClient:home:matthewsPhone:site" }
String   MatthewsPhoneMAC        "Matthew's iPhone: MAC [%s]"                       { channel="unifi:wirelessClient:home:matthewsPhone:macAddress" }
String   MatthewsPhoneIP         "Matthew's iPhone: IP [%s]"                        { channel="unifi:wirelessClient:home:matthewsPhone:ipAddress" }
String   MatthewsPhoneAP         "Matthew's iPhone: AP [%s]"                        { channel="unifi:wirelessClient:home:matthewsPhone:ap" }
String   MatthewsPhoneESSID      "Matthew's iPhone: ESSID [%s]"                     { channel="unifi:wirelessClient:home:matthewsPhone:essid" }
Number   MatthewsPhoneRSSI       "Matthew's iPhone: RSSI [%d]"                      { channel="unifi:wirelessClient:home:matthewsPhone:rssi" }
Number   MatthewsPhoneUptime     "Matthew's iPhone: Uptime [%d]"                    { channel="unifi:wirelessClient:home:matthewsPhone:uptime" }
DateTime MatthewsPhoneLastSeen   "Matthew's iPhone: Last Seen [%1$tH:%1$tM:%1$tS]"  { channel="unifi:wirelessClient:home:matthewsPhone:lastSeen" }
Switch   MatthewsPhoneBlocked    "Matthew's iPhone: Blocked"                        { channel="unifi:wirelessClient:home:matthewsPhone:blocked" }
Switch   MatthewsPhoneReconnect  "Matthew's iPhone: Reconnect"                      { channel="unifi:wirelessClient:home:matthewsPhone:reconnect" }

transform/unifi.map

ON=Home
OFF=Away

sitemaps/unifi.sitemap

sitemap unifi label="UniFi Binding"
{
	Frame {
		Text item=MatthewsPhone
		Text item=MatthewsPhoneSite
		Text item=MatthewsPhoneMAC
		Text item=MatthewsPhoneIP
		Text item=MatthewsPhoneAP
		Text item=MatthewsPhoneESSID
		Text item=MatthewsPhoneRSSI
		Text item=MatthewsPhoneUptime
		Text item=MatthewsPhoneLastSeen
		Switch item=MatthewsPhoneBlocked
		Switch item=MatthewsPhoneReconnect
	}
}

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)

← Twitter UnifiedRemote →

# UniFi Binding

# Supported Things

# Discovery

# Binding Configuration

# Bridge Configuration

# Thing Configuration

# site

# wlan

# wirelessClient & wiredClient

# cid

# site

# considerHome

# poePort

# Channels

# site

# wlan

# wirelessClient

# wiredClient

# blocked

# reconnect

# poePort

# Full Example

# `site`

# `wlan`

# `wirelessClient` & `wiredClient`

# `cid`

# `site`

# `considerHome`

# `poePort`

# `site`

# `wlan`

# `wirelessClient`

# `wiredClient`

# `blocked`

# `reconnect`

# `poePort`